# changelog

author: Tomas Jelinek <tojeline@redhat.com> - 0.9.140-1
changelog:
  - Rebased to latest upstream packages
  - Added a note to man page and help poiting to cluster properties description
  - Fixed parsing of the corosync.conf file
  - Fixed diferences between the 'pcs cluster status' and 'pcs status cluster' commands as one is documented to be an alias of the other
  - Do not remove constraints referencing a group when removing a resource from the group
  - Added dashboard showing status of clusters to web UI
  - Added node authentication dialog to web UI
  - Added synchronization of web UI configuration files across cluster nodes
  - Fixed node authentication when one of the nodes is unreachable
  - Fixed an error message in the 'pcs config restore' command if a node is not authenticated
  - Fixed parsing of 'pcs acl role create' command's parameters
  - Properly overwrite a tokens file if its contents is unparsable
  - The 'pcs config' command now displays resources defaults and operations defaults
  - Show a useful error message when attempting to add a duplicate fence level in web UI
  - Added the require-all parameter to ordering constraints listing
  - Fixed VirtualDomain resource removal when there are constraints for the resource
  - Added a warning when removing a cluster node may cause a loss of the quorum
  - Fixed an error when uncloning a non-cloned resource
  - Fixed an error when removing a resource from a cloned group
  - Fixed waiting for resource commands to finish
  - Fixed 'pcs cluster start' and similar commands when run under a non-root account
  - Fixed parsing of 'pcs constraint order set' command's parameters
  - Fixed an error when creating a resource with an id which already exists
  - Improved man page and help for the 'pcs resource move' and 'pcs resource ban' commands
  - Fixed an error when referencing a non-existing acl role in 'pcs acl' commands
  - Fixed an error when adding an invalid stonith level
  - Fixed constraints removal and node standby / unstandby using remote web UI
  - Fixed formatting of resource / fence agent description
  - Fence agent description now contains information about the agent
  - The 'pcs status --full' command now displays node attributes and migration summary
  - Clufter moved to a standalone package
  - Fixed pcsd communication when one of the nodes is not authenticated
  - Fixed a timeout value in the fence_xvm agent form
  - Fixed the 'pcs resource enable' command when working with clones and multi-state resources
  - Resolves: rhbz#1198265 rhbz#1121791 rhbz#1134426 rhbz#1158491 rhbz#1158537 rhbz#1158566 rhbz#1158569 rhbz#1158577 rhbz#1163682 rhbz#1165803 rhbz#1166160 rhbz#1170205 rhbz#1176687 rhbz#1182793 rhbz#1182986 rhbz#1183752 rhbz#1186692 rhbz#1187320 rhbz#1187571 rhbz#1188571 rhbz#1196412 rhbz#1197758 rhbz#1199073 rhbz#1201452 rhbz#1202457 rhbz#1204880 rhbz#1205653 rhbz#1206214 rhbz#1206219 rhbz#1206223 rhbz#1212904 rhbz#1213429 rhbz#1215198 rhbz#1218979


author: Tomas Jelinek <tojeline@redhat.com> - 0.9.141-1
changelog:
  - Rebased to latest upstream packages
  - Added a command to relocate resources to their preferred host
  - Fixed the dashboard in web UI
  - Configure corosync to log to a file
  - Added warning when creating a duplicate resource operation
  - Added support for debugging resource agents
  - Do not automatically use --force when removing a resource using web UI
  - Fixed pcsd communication when one of the nodes is not authenticated
  - Updated ruby gems
  - Spec file fixes
  - Resolves: rhbz#1198265 rhbz#1122818 rhbz#1158566 rhbz#1163671 rhbz#1175400 rhbz#1185096 rhbz#1198274 rhbz#1213429 rhbz#1231987 rhbz#1232644 rhbz#1233574


author: Chris Feist <cfeist@redhat.com> - 0.9.142-1
changelog:
  - Rebase to latest upstream sources
  - Added ability to set hostname when using IP address to create a cluster
  - Added ability to clear out tokens with pcs pcsd clear-auth
  - Added ability to use nagios agents
  - Fixed issue with orphaned resources causing GUI to fail to work properly
  - More dashboard fixes
  - Synchronize files between pcsd instances in a cluster to allow for HA pcsd
  - ACL role fixes for pcs/pcsd
  - Resolves: rhbz#118310 rhbz#1207805 rhbz#1235022 rhbz#1198222 rhbz#1158566 rhbz#1158577 rhbz#1166160


author: Tomas Jelinek <tojeline@redhat.com> - 0.9.143-1
changelog:
  - Added support for setting permissions for users and groups to clusters managed by web UI
  - Resources are now displayed in a tree (clone, master/slave, group, primitive) in web UI
  - Renamed 'pcs resource relocate clean' command to 'pcs resource relocate clear'
  - Improved logging of config files synchronization
  - Various fixes in Resources tab in web UI
  - Added missing dependecy on initscripts to the spec file
  - Fixed traceback when running 'pcs resource enable clvmd --wait'
  - Resolves: rhbz#1122818 rhbz#1158571 rhbz#1158577 rhbz#1182119 rhbz#1189857 rhbz#1198640 rhbz#1219574 rhbz#1243579 rhbz#1247818 rhbz#1250720


author: Tomas Jelinek <tojeline@redhat.com> - 0.9.143-2
changelog:
  - Fixed relocation of unique clone resources to their optimal node
  - Improved logging of node to node communication
  - Fixed 'Add resource' form in web UI
  - Fixed support for nagios agents
  - Resolves: rhbz#1122818 rhbz#1158577 rhbz#1189857 rhbz#1235022


author: Tomas Jelinek <tojeline@redhat.com> - 0.9.143-3
changelog:
  - Fixed relocation of remote nodes to their optimal node
  - Fixed pcs/pcsd path detection
  - Fixed command injection vulnerability
  - Resolves: #rhbz1122818 #rhbz1253294 #rhbz1253491


author: Tomas Jelinek <tojeline@redhat.com> - 0.9.143-5
changelog:
  - Fixed pcsd certificates synchronization
  - Multiple fixes in web UI
  - Resolves: #rhbz1158566 #rhbz1158577 #rhbz1189857


author: Tomas Jelinek <tojeline@redhat.com> - 0.9.143-7
changelog:
  - Multiple fixes in web UI
  - Fixed crash on missing nagios agents metadata
  - Check user/group membership on each request
  - Print output of crm_resource in pcs resource cleanup
  - Resolves: #rhbz1158571 #rhbz1189857 #rhbz1235022 #rhbz1257369


author: Tomas Jelinek <tojeline@redhat.com> - 0.9.143-8
changelog:
  - Fixes in loading cluster status for web UI
  - Fixed checking user/group membership
  - Fixed a typo in an error message
  - Resolves: #rhbz1158566 #rhbz1158569 #rhbz1158571


author: Tomas Jelinek <tojeline@redhat.com> - 0.9.143-9
changelog:
  - Multiple fixes in web UI (dashboard, nodes, resources, fence devices)
  - Fixed an authentication issue in web UI
  - Port parameter of fence agents is now considered optional
  - Resolves: rhbz#1158566 rhbz#1188361 rhbz#1189857


author: Tomas Jelinek <tojeline@redhat.com> - 0.9.143-10
changelog:
  - Web UI fixes
  - Added more detailed warnings for 'pcs stonith confirm'
  - Resolves: rhbz#1189857 rhbz#1245264


author: Chris Feist <cfeist@redhat.com> - 0.9.143-12
changelog:
  - Fixed issue managing resources that were clones and had the unmanaged
    meta attribute set under the clone/master
  - Resolves: rhbz#1268801


author: Chris Feist <cfeist@redhat.com> - 0.9.143-14
changelog:
  - Fixed remaining issues when managing resources/groups/etc. that were
    previously unmanaged
  - Resolves: rhbz#1268801


author: Ivan Devat <idevat@redhat.com> - 0.9.151-1
changelog:
  - Rebased to latest upstream sources
  - Added support for utilization attributes
  - Optimized pcs status command
  - Fixes in manpage and built-in help
  - Improved resource cleanups
  - Added --wait support for cluster start and node standby commands
  - Improved resource and fence agent options in web UI
  - Added ability to put a node into maintenance mode
  - Fixed adding acl permission when targed id does not exists
  - Fixed deleting resource when referenced in acl
  - Improved pcsd launch script
  - Added automatically setting provides=unfencing meta attribute for stonith device
  - Improved Cluster Properties page in web UI
  - Fixed page update after adding group in web UI
  - Fixed deleting group (clones) when managing older cluster in web UI
  - Fixed stonith update command when fence agents fails to get metadata
  - Added support for putting Pacemaker Remote nodes into standby
  - Added support for omission stopped resources in status command
  - Added login input sanitization in web UI
  - Added config settings for SSL options and ciphers
  - Improved resource update command to inform user about missused op settings
  - Spec file fixes
  - Added support for constraint tickets from command line
  - Fixed CVE-2016-0720 pcs: Cross-Site Request Forgery in web UI
  - Fixed CVE-2016-0721 pcs: cookies are not invalidated upon logout
  - Resolves: rhbz#1299847 rhbz#1158500 rhbz#1207405 rhbz#1219581 rhbz#1225946 rhbz#1220512 rhbz#1229822 rhbz#1231858 rhbz#1247088 rhbz#1248990 rhbz#1249085 rhbz#1252050 rhbz#1262773 rhbz#1281371 rhbz#1283562 rhbz#1286664 rhbz#1287320 rhbz#1290512 rhbz#1298585 rhbz#1305786 rhbz#1315652 rhbz#1321021 rhbz#1315743 rhbz#1315357 rhbz#1305049 rhbz#1335779 rhbz#1330884


author: Ivan Devat <idevat@redhat.com> - 0.9.152-1
changelog:
  - Rebased to latest upstream sources
  - Added support for sbd configuration
  - Added support for constraint tickets in web UI
  - Added warning to pcs quorum unblock command
  - Fixes in manpage and built-in help
  - Config files marked as config
  - Resolves: rhbz#1299847 rhbz#1164402 rhbz#1305049 rhbz#1264566 rhbz#1225946 rhbz#1231858 rhbz#1328066 rhbz#1341114


author: Ivan Devat <idevat@redhat.com> - 0.9.152-3
changelog:
  - Added support for pacemaker alerts
  - Added support for qdevice/qnetd provided by corosync
  - Fixed sbd calls on python3
  - Fixed bad request when resource removal takes longer than pcs expects
  - Added support for set expected votes on a live cluster
  - Added a wrapper for holding SELinux context when pcsd is started by systemd
  - Resolves: rhbz#1315371 rhbz#1158805 rhbz#1164402 rhbz#1346852 rhbz#1327739 rhbz#1348579 rhbz#1349465


author: Ivan Devat <idevat@redhat.com> - 0.9.152-4
changelog:
  - Added colocation constraint support in web UI
  - Fixed displaying cluster config when cib is provided as a file
  - Removed side effect on /etc/hosts during build
  - Recipient id is used as identifier in alarms
  - Improved quorum device commands syntax
  - Fixed pcs client for running on a remote node
  - Resolves: rhbz#1281364 rhbz#1269242 rhbz#1353607 rhbz#1315371 rhbz#1158805 rhbz#1289418


author: Ivan Devat <idevat@redhat.com> - 0.9.152-5
changelog:
  - Fixed traceback when stopping pcsd shortly after start
  - Fixed removing a dead node from a cluster
  - Added support for clufter's 'dist' parameter
  - Fixed filtering by property name in "pcs property show"
  - Fixed an error in web UI when removing resources takes a long time
  - Fixed occasional missing optional arguments of resources in web UI
  - Improved help for alerts
  - Fixed recreating a remote node resource
  - Fixed exceptions when authenticating cluster nodes
  - Fixed permissions for bash completion file
  - Resolves: rhbz#1348579 rhbz#1225423 rhbz#1357945 rhbz#1302010 rhbz#1301993 rhbz#1346852 rhbz#1231858 rhbz#1315371 rhbz#1303136 rhbz#1329472 rhbz#1359154 rhbz#1349465


author: Ivan Devat <idevat@redhat.com> - 0.9.152-6
changelog:
  - Fixed documentation regarding clufter
  - Added possibility to change order of resources in a group in web UI
  - Added support for unmanaged resources in web UI
  - Added support for booth (cluster ticket manager)
  - Resolves: rhbz#1357945 rhbz#1281391 rhbz#1264360 rhbz#1308514


author: Ivan Devat <idevat@redhat.com> - 0.9.152-7
changelog:
  - Added possibility to hide inactive resources in "pcs resource show" command
  - Fixed exceptions handling when waiting for response from user in command line
  - Fixed nonexisting resource detection in pcsd
  - Fixed SBD_WATCHDOG_TIMEOUT option value validation
  - Removed possibility to change SBD_PACEMAKER
  - Fixed exception when disabling service on systemd systems
  - Added automatic auto_tie_breaker quorum option set whenever it is needed for SBD to work
  - Fixed setting sbd watchdog in config
  - Fixed error handling when upgrading cib schema
  - Improved consistency of syntax 'pcs alert recipient add' command
  - Resolves: rhbz#1298585 rhbz#1354498 rhbz#1346852 rhbz#1164402 rhbz#1315371 rhbz#1366307


author: Ivan Devat <idevat@redhat.com> - 0.9.152-8
changelog:
  - Fixed error message in node maintenance/unmaintenance commands
  - Fixed missing line at the end of booth config 
  - Fixed documentation regarding booth
  - Fixed remove multiple booth resources with "--force" flag
  - Fixed cleanup of ip resource if it fails to create booth resource
  - Added bash completion for booth
  - Fixed display full booth configuration
  - Added ability to display booth config from remote node
  - Added support for ticket options during adding booth ticket
  - Fixed adding node to cluster when booth is not installed
  - Added restart command for booth
  - Fixed check if auto_tie_breaker is required when enabling sbd
  - Improved way of displaying status of unmanaged primitive resources in web UI
  - Resolves: rhbz#1247088 rhbz#1308514 rhbz#1164402 rhbz#1264360


author: Ivan Devat <idevat@redhat.com> - 0.9.152-9
changelog:
  - Added warning when stopping/destroying qdevice instance which is being used 
  - Fiexed removing qdevice from a cluster which uses sbd
  - Fixed re-running "pcs cluster node add" if it failed due to qdevice
  - Fixed documentation regarding booth
  - Added warning when using unknown booth ticket option
  - Added constraint ticket remove command
  - Fixed return code and message when displaying node utilization for nonexistent node
  - Fixed setting utilization attributes in web UI
  - Fixed support for node utilization on remote node
  - Fixed updating of selected group when displaying new resource dialog
  - Fixed group list when managing cluster running older pcs in web UI 
  - Fixed displaying unmanaged status for resources for older pcs in web UI
  - Fixed clone/master/unclone group/ungroup buttons for older pcs in web UI
  - Fixed node standby/unstandby for older pcs in web UI
  - Resolves: rhbz#1158805 rhbz#1308514 rhbz#1305049 rhbz#1158500 rhbz#1231858


author: Ivan Devat <idevat@redhat.com> - 0.9.152-10
changelog:
  - Fixed error when stopping qdevice if is not running
  - Fixed removing qdevice from a cluster
  - Fixed documentation regarding booth
  - Fixed return code when no matching ticket constraint found during remove
  - Resolves: rhbz#1158805 rhbz#1305049


author: Ivan Devat <idevat@redhat.com> - 0.9.152-10.el7_3.1
changelog:
  - Fixed resolving resource agent name containing systemd service instance
  - Added posibility to push only diff of cib in 'cluster cib push'
  - Resolves: rhbz#1408476 rhbz#1404233


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.0-2
changelog:
  - Bugzilla Bug #668839 - Review Request: pki-core
  -   Added component versioning comments
  -   Updated JSS from "4.2.6-10" to "4.2.6-12"
  -   Modified installation section to preserve timestamps
  -   Removed sectional comments


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.0-3
changelog:
  - Bugzilla Bug #668839 - Review Request: pki-core
  -   Removed empty "pre" from "pki-ca"
  -   Consolidated directory ownership
  -   Corrected file ownership within subpackages
  -   Removed all versioning from NSS and NSPR packages


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.1-1
changelog:
  - Allow 'pki-native-tools' to be installed independently of 'pki-setup'
  - Removed explicit 'pki-setup' requirement from 'pki-ca'
    (since it already requires 'pki-common')
  - 'pki-setup'
  -     Bugzilla Bug #223343 - pkicreate: should add 'pkiuser' to nfast group
  -     Bugzilla Bug #629377 - Selinux errors during pkicreate CA, KRA, OCSP
        and TKS.
  -     Bugzilla Bug #555927 - rhcs80 - AgentRequestFilter servlet and port
        fowarding for agent services
  -     Bugzilla Bug #632425 - Port to tomcat6
  -     Bugzilla Bug #606946 - Convert Native Tools to use ldapAPI from
        OpenLDAP instead of the Mozldap
  -     Bugzilla Bug #638377 - Generate PKI UI components which exclude a GUI
        interface
  -     Bugzilla Bug #643206 - New CMake based build system for Dogtag
  -     Bugzilla Bug #658926 - org.apache.commons.lang class not found on F13
  -     Bugzilla Bug #661514 - CMAKE build system requires rules to make
        javadocs
  -     Bugzilla Bug #665388 - jakarta-* jars have been renamed to apache-*,
        pkicreate fails Fedora 14 and above
  -     Bugzilla Bug #23346 - Two conflicting ACL list definitions in source
        repository
  -     Bugzilla Bug #656733 - Standardize jar install location and jar names
  - 'pki-symkey'
  -     Bugzilla Bug #638377 - Generate PKI UI components which exclude a GUI
        interface
  -     Bugzilla Bug #643206 - New CMake based build system for Dogtag
  -     Bugzilla Bug #644056 - CS build contains warnings
  - 'pki-native-tools'
  -     template change
  -     Bugzilla Bug #606946 - Convert Native Tools to use ldapAPI from
        OpenLDAP instead of the Mozldap
  -     Bugzilla Bug #638377 - Generate PKI UI components which exclude a GUI
        interface
  -     Bugzilla Bug #643206 - New CMake based build system for Dogtag
  -     Bugzilla Bug #644056 - CS build contains warnings
  - 'pki-util'
  -     Bugzilla Bug #615814 - rhcs80 - profile policyConstraintsCritical
        cannot be set to true
  -     Bugzilla Bug #224945 - javadocs has missing descriptions, contains
        empty packages
  -     Bugzilla Bug #621337 - Limit the received senderNonce value to 16 bytes.
  -     Bugzilla Bug #621338 - Include a server randomly-generated 16 byte
        senderNonce in all signed SCEP responses.
  -     Bugzilla Bug #621327 - Provide switch disabling algorithm downgrade
        attack in SCEP
  -     Bugzilla Bug #621334 - Provide an option to set default hash algorithm
        for signing SCEP response messages.
  -     Bugzilla Bug #635033 - At installation wizard selecting key types other
        than CA's signing cert will fail
  -     Bugzilla Bug #645874 - rfe ecc - add ecc curve name support in JSS and
        CS interface
  -     Bugzilla Bug #488253 - com.netscape.cmsutil.ocsp.BasicOCSPResponse
        ASN.1 encoding/decoding is broken
  -     Bugzilla Bug #551410 - com.netscape.cmsutil.ocsp.TBSRequest ASN.1
        encoding/decoding is incomplete
  -     Bugzilla Bug #550331 - com.netscape.cmsutil.ocsp.ResponseData ASN.1
        encoding/decoding is incomplete
  -     Bugzilla Bug #623452 - rhcs80 pkiconsole profile policy editor limit
        policy extension to 5 only
  -     Bugzilla Bug #638377 - Generate PKI UI components which exclude a GUI
        interface
  -     Bugzilla Bug #651977 - turn off ssl2 for java servers (server.xml)
  -     Bugzilla Bug #643206 - New CMake based build system for Dogtag
  -     Bugzilla Bug #661514 - CMAKE build system requires rules to make
        javadocs
  -     Bugzilla Bug #658188 - remove remaining references to tomcat5
  -     Bugzilla Bug #656733 - Standardize jar install location and jar names
  -     Bugzilla Bug #223319 - Certificate Status inconsistency between token
        db and CA
  -     Bugzilla Bug #531137 - RHCS 7.1 - Running out of Java Heap Memory
        During CRL Generation
  - 'pki-java-tools'
  -     Bugzilla Bug #224945 - javadocs has missing descriptions, contains
        empty packages
  -     Bugzilla Bug #638377 - Generate PKI UI components which exclude a GUI
        interface
  -     Bugzilla Bug #659004 - CC: AuditVerify hardcoded with SHA-1
  -     Bugzilla Bug #643206 - New CMake based build system for Dogtag
  -     Bugzilla Bug #661514 - CMAKE build system requires rules to make
        javadocs
  -     Bugzilla Bug #662156 - HttpClient is hard-coded to handle only up to
        5000 bytes
  -     Bugzilla Bug #656733 - Standardize jar install location and jar names
  - 'pki-common'
  -     Bugzilla Bug #583822 - CC: ACL issues from CA interface CC doc review
  -     Bugzilla Bug #623745 - SessionTimer with LDAPSecurityDomainSessionTable
        started before configuration completed
  -     Bugzilla Bug #620925 - CC: auditor needs to be able to download audit
        logs in the java subsystems
  -     Bugzilla Bug #615827 - rhcs80 - profile policies need more than 5
        policy mappings (seem hardcoded)
  -     Bugzilla Bug #224945 - javadocs has missing descriptions, contains
        empty packages
  -     Bugzilla Bug #548699 - subCA's admin certificate should be generated by
        itself
  -     Bugzilla Bug #621322 - Provide switch disabling SCEP support in CA
  -     Bugzilla Bug #563386 - rhcs80 ca crash on invalid inputs to profile
        caAgentServerCert (null cert_request)
  -     Bugzilla Bug #621339 - SCEP one-time PIN can be used an unlimited
        number of times
  -     Bugzilla Bug #583825 - CC: Obsolete servlets to be removed from web.xml
        as part of CC interface review
  -     Bugzilla Bug #629677 - TPS: token enrollment fails.
  -     Bugzilla Bug #621350 - Unauthenticated user can decrypt a one-time PIN
        in a SCEP request
  -     Bugzilla Bug #503838 - rhcs71-80 external publishing ldap connection
        pools not reliable - improve connections or discovery
  -     Bugzilla Bug #629769 - password decryption logs plain text password
  -     Bugzilla Bug #583823 - CC: Auditing issues found as result of
        CC - interface review
  -     Bugzilla Bug #632425 - Port to tomcat6
  -     Bugzilla Bug #586700 - OCSP Server throws fatal error while using
        OCSP console for renewing SSL Server certificate.
  -     Bugzilla Bug #621337 - Limit the received senderNonce value to 16 bytes.
  -     Bugzilla Bug #621338 - Include a server randomly-generated 16 byte
        senderNonce in all signed SCEP responses.
  -     Bugzilla Bug #607380 - CC: Make sure Java Console can configure all
        security relevant config items
  -     Bugzilla Bug #558100 - host challenge of the Secure Channel needs to be
        generated on TKS instead of TPS.
  -     Bugzilla Bug #489342 -
        com.netscape.cms.servlet.common.CMCOutputTemplate.java
        doesn't support EC
  -     Bugzilla Bug #630121 - OCSP responder lacking option to delete or
        disable a CA that it serves
  -     Bugzilla Bug #634663 - CA CMC response default hard-coded to SHA1
  -     Bugzilla Bug #621327 - Provide switch disabling algorithm downgrade
        attack in SCEP
  -     Bugzilla Bug #621334 - Provide an option to set default hash algorithm
        for signing SCEP response messages.
  -     Bugzilla Bug #635033 - At installation wizard selecting key types other
        than CA's signing cert will fail
  -     Bugzilla Bug #621341 - Add CA support for new SCEP key pair dedicated
        for SCEP signing and encryption.
  -     Bugzilla Bug #223336 - ECC: unable to clone a ECC CA
  -     Bugzilla Bug #539781 - rhcs 71 - CRLs Partitioned
        by Reason Code - onlySomeReasons ?
  -     Bugzilla Bug #637330 - CC feature: Key Management - provide signature
        verification functions (JAVA subsystems)
  -     Bugzilla Bug #223313 - should do random generated IV param
        for symmetric keys
  -     Bugzilla Bug #555927 - rhcs80 - AgentRequestFilter servlet and port
        fowarding for agent services
  -     Bugzilla Bug #630176 - Improve reliability of the LdapAnonConnFactory
  -     Bugzilla Bug #524916 - ECC key constraints plug-ins should be based on
        ECC curve names (not on key sizes).
  -     Bugzilla Bug #516632 - RHCS 7.1 - CS Incorrectly Issuing Multiple
        Certificates from the Same Request
  -     Bugzilla Bug #648757 - expose and use updated cert verification
        function in JSS
  -     Bugzilla Bug #638242 - Installation Wizard: at SizePanel, fix selection
        of signature algorithm; and for ECC curves
  -     Bugzilla Bug #451874 - RFE - Java console - Certificate Wizard missing
        e.c. support
  -     Bugzilla Bug #651040 - cloning shoud not include sslserver
  -     Bugzilla Bug #542863 - RHCS8: Default cert audit nickname written to
        CS.cfg files imcomplete when the cert is stored on a hsm
  -     Bugzilla Bug #360721 - New Feature: Profile Integrity Check . . .
  -     Bugzilla Bug #651916 - kra and ocsp are using incorrect ports
        to talk to CA and complete configuration in DonePanel
  -     Bugzilla Bug #642359 - CC Feature - need to verify certificate when it
        is added
  -     Bugzilla Bug #653713 - CC: setting trust on a CIMC cert requires
        auditing
  -     Bugzilla Bug #489385 - references to rhpki
  -     Bugzilla Bug #499494 - change CA defaults to SHA2
  -     Bugzilla Bug #623452 - rhcs80 pkiconsole profile policy editor limit
        policy extension to 5 only
  -     Bugzilla Bug #649910 - Console: an auditor or agent can be added to
        an administrator group.
  -     Bugzilla Bug #632425 - Port to tomcat6
  -     Bugzilla Bug #638377 - Generate PKI UI components which exclude a GUI
        interface
  -     Bugzilla Bug #651977 - turn off ssl2 for java servers (server.xml)
  -     Bugzilla Bug #653576 - tomcat5 does not always run filters on servlets
        as expected
  -     Bugzilla Bug #642357 - CC Feature- Self-Test plugins only check for
        validity
  -     Bugzilla Bug #643206 - New CMake based build system for Dogtag
  -     Bugzilla Bug #659004 - CC: AuditVerify hardcoded with SHA-1
  -     Bugzilla Bug #661196 - ECC(with nethsm) subca configuration fails with
        Key Type RSA Not Matched despite using ECC key pairs for rootCA & subCA.
  -     Bugzilla Bug #661889 - The Servlet TPSRevokeCert of the CA returns an
        error to TPS even if certificate in question is already revoked.
  -     Bugzilla Bug #663546 - Disable the functionalities that are not exposed
        in the console
  -     Bugzilla Bug #661514 - CMAKE build system requires rules to make
        javadocs
  -     Bugzilla Bug #658188 - remove remaining references to tomcat5
  -     Bugzilla Bug #649343 - Publishing queue should recover from CA crash.
  -     Bugzilla Bug #491183 - rhcs rfe - add rfc 4523 support for pkiUser and
        pkiCA, obsolete 2252 and 2256
  -     Bugzilla Bug #640710 - Current SCEP implementation does not support HSMs
  -     Bugzilla Bug #656733 - Standardize jar install location and jar names
  -     Bugzilla Bug #661142 - Verification should fail when
        a revoked certificate is added
  -     Bugzilla Bug #642741 - CS build uses deprecated functions
  -     Bugzilla Bug #670337 - CA Clone configuration throws TCP connection error
  -     Bugzilla Bug #662127 - CC doc Error: SignedAuditLog expiration time
        interface is no longer available through console
  - 'pki-selinux'
  -     Bugzilla Bug #638377 - Generate PKI UI components which exclude a GUI
        interface
  -     Bugzilla Bug #643206 - New CMake based build system for Dogtag
  -     Bugzilla Bug #667153 - store nuxwdog passwords in kernel ring buffer -
        selinux changes
  - 'pki-ca'
  -     Bugzilla Bug #583822 - CC: ACL issues from CA interface CC doc review
  -     Bugzilla Bug #620925 - CC: auditor needs to be able to download audit
        logs in the java subsystems
  -     Bugzilla Bug #621322 - Provide switch disabling SCEP support in CA
  -     Bugzilla Bug #583824 - CC: Duplicate servlet mappings found as part of
        CC interface doc review
  -     Bugzilla Bug #621602 - pkiconsole: Click on 'Publishing' option with
        admin privilege throws error "You are not authorized to perform this
        operation".
  -     Bugzilla Bug #583825 - CC: Obsolete servlets to be removed from web.xml
        as part of CC interface review
  -     Bugzilla Bug #583823 - CC: Auditing issues found as result of
        CC - interface review
  -     Bugzilla Bug #519291 - Deleting a CRL Issuing Point after edits throws
        'Internal Server Error'.
  -     Bugzilla Bug #586700 - OCSP Server throws fatal error while using
        OCSP console for renewing SSL Server certificate.
  -     Bugzilla Bug #621337 - Limit the received senderNonce value to 16 bytes.
  -     Bugzilla Bug #621338 - Include a server randomly-generated 16 byte
        senderNonce in all signed SCEP responses.
  -     Bugzilla Bug #558100 - host challenge of the Secure Channel needs to be
        generated on TKS instead of TPS.
  -     Bugzilla Bug #630121 - OCSP responder lacking option to delete or
        disable a CA that it serves
  -     Bugzilla Bug #634663 - CA CMC response default hard-coded to SHA1
  -     Bugzilla Bug #621327 - Provide switch disabling algorithm downgrade
        attack in SCEP
  -     Bugzilla Bug #621334 - Provide an option to set default hash algorithm
        for signing SCEP response messages.
  -     Bugzilla Bug #539781 - rhcs 71 - CRLs Partitioned
        by Reason Code - onlySomeReasons ?
  -     Bugzilla Bug #637330 - CC feature: Key Management - provide signature
        verification functions (JAVA subsystems)
  -     Bugzilla Bug #555927 - rhcs80 - AgentRequestFilter servlet and port
        fowarding for agent services
  -     Bugzilla Bug #524916 - ECC key constraints plug-ins should be based on
        ECC curve names (not on key sizes).
  -     Bugzilla Bug #516632 - RHCS 7.1 - CS Incorrectly Issuing Multiple
        Certificates from the Same Request
  -     Bugzilla Bug #638242 - Installation Wizard: at SizePanel, fix selection
        of signature algorithm; and for ECC curves
  -     Bugzilla Bug #529945 - (Instructions and sample only) CS 8.0 GA
        release -- DRM and TKS do not seem to have CRL checking enabled
  -     Bugzilla Bug #609641 - CC: need procedure (and possibly tools) to help
        correctly set up CC environment
  -     Bugzilla Bug #509481 - RFE: support sMIMECapabilities extensions in
        certificates (RFC 4262)
  -     Bugzilla Bug #651916 - kra and ocsp are using incorrect ports
        to talk to CA and complete configuration in DonePanel
  -     Bugzilla Bug #511990 - rhcs 7.3, 8.0 - re-activate missing object
        signing support in RHCS
  -     Bugzilla Bug #651977 - turn off ssl2 for java servers (server.xml)
  -     Bugzilla Bug #489385 - references to rhpki
  -     Bugzilla Bug #499494 - change CA defaults to SHA2
  -     Bugzilla Bug #623452 - rhcs80 pkiconsole profile policy editor limit
        policy extension to 5 only
  -     Bugzilla Bug #649910 - Console: an auditor or agent can be added to
        an administrator group.
  -     Bugzilla Bug #632425 - Port to tomcat6
  -     Bugzilla Bug #638377 - Generate PKI UI components which exclude a GUI
        interface
  -     Bugzilla Bug #653576 - tomcat5 does not always run filters on servlets
        as expected
  -     Bugzilla Bug #642357 - CC Feature- Self-Test plugins only check for
        validity
  -     Bugzilla Bug #643206 - New CMake based build system for Dogtag
  -     Bugzilla Bug #661128 - incorrect CA ports used for revoke, unrevoke
        certs in TPS
  -     Bugzilla Bug #512496 - RFE rhcs80 - crl updates and scheduling feature 
  -     Bugzilla Bug #661196 - ECC(with nethsm) subca configuration fails with
        Key Type RSA Not Matched despite using ECC key pairs for rootCA & subCA.
  -     Bugzilla Bug #649343 - Publishing queue should recover from CA crash.
  -     Bugzilla Bug #491183 - rhcs rfe - add rfc 4523 support for pkiUser and
        pkiCA, obsolete 2252 and 2256
  -     Bugzilla Bug #223346 - Two conflicting ACL list definitions in source
        repository
  -     Bugzilla Bug #640710 - Current SCEP implementation does not support HSMs
  -     Bugzilla Bug #656733 - Standardize jar install location and jar names
  -     Bugzilla Bug #661142 - Verification should fail when
        a revoked certificate is added
  -     Bugzilla Bug #668100 - DRM storage cert has OCSP signing extended key
        usage
  -     Bugzilla Bug #662127 - CC doc Error: SignedAuditLog expiration time
        interface is no longer available through console
  -     Bugzilla Bug #531137 - RHCS 7.1 - Running out of Java Heap Memory
        During CRL Generation
  - 'pki-silent'
  -     Bugzilla Bug #627309 - pkisilent subca configuration fails.
  -     Bugzilla Bug #640091 - pkisilent panels need to match with changed java
        subsystems
  -     Bugzilla Bug #527322 - pkisilent ConfigureDRM should configure DRM
        Clone.
  -     Bugzilla Bug #643053 - pkisilent DRM configuration fails
  -     Bugzilla Bug #583754 - pki-silent needs an option to configure signing
        algorithm for CA certificates
  -     Bugzilla Bug #489385 - references to rhpki
  -     Bugzilla Bug #638377 - Generate PKI UI components which exclude a GUI
        interface
  -     Bugzilla Bug #651977 - turn off ssl2 for java servers (server.xml)
  -     Bugzilla Bug #640042 - TPS Installlation Wizard: need to move Module
        Panel up to before Security Domain Panel
  -     Bugzilla Bug #643206 - New CMake based build system for Dogtag
  -     Bugzilla Bug #588323 - Failed to enable cipher 0xc001
  -     Bugzilla Bug #656733 - Standardize jar install location and jar names
  -     Bugzilla Bug #645895 - pkisilent: add ability to select ECC curves,
        signing algorithm
  -     Bugzilla Bug #658641 - pkisilent doesn't not properly handle passwords
        with special characters
  -     Bugzilla Bug #642741 - CS build uses deprecated functions


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.1-2
changelog:
  - 'pki-symkey'
  -     Bugzilla Bug #671265 - pki-symkey jar version incorrect
  - 'pki-common'
  -     Bugzilla Bug #564207 - Searches for completed requests in the agent
        interface returns zero entries


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.1-3
changelog:
  - Bugzilla Bug #656661 - Please Update Spec File to use 'ghost' on files
    in /var/run and /var/lock


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.2-1
changelog:
  - Bugzilla Bug #673233 - Rebase pki-core to pick the latest features and fixes
  - 'pki-setup'
  -     Bugzilla Bug #673638 - Installation within IPA hangs
  - 'pki-symkey'
  - 'pki-native-tools'
  - 'pki-util'
  - 'pki-java-tools'
  -     Bugzilla Bug #673614 - CC: Review of cryptographic algorithms provided
        by 'netscape.security.provider' package
  - 'pki-common'
  -     Bugzilla Bug #672291 - CA is not publishing certificates issued using
        "Manual User Dual-Use Certificate Enrollment"
  -     Bugzilla Bug #670337 - CA Clone configuration throws TCP connection
        error.
  -     Bugzilla Bug #504056 - Completed SCEP requests are assigned to the
        "begin" state instead of "complete".
  -     Bugzilla Bug #504055 - SCEP requests are not properly populated
  -     Bugzilla Bug #564207 - Searches for completed requests in the agent
        interface returns zero entries
  -     Bugzilla Bug #672291 - CA is not publishing certificates issued using
        "Manual User Dual-Use Certificate Enrollment" -
  -     Bugzilla Bug #673614 - CC: Review of cryptographic algorithms provided
        by 'netscape.security.provider' package
  -     Bugzilla Bug #672920 - CA console: adding policy to a profile throws
        'Duplicate policy' error in some cases.
  -     Bugzilla Bug #673199 - init script returns control before web apps have
        started
  -     Bugzilla Bug #674917 - Restore identification of Tomcat-based PKI
        subsystem instances
  - 'pki-selinux'
  - 'pki-ca'
  -     Bugzilla Bug #504013 - sscep request is rejected due to authentication
        error if submitted through one time pin router certificate enrollment.
  -     Bugzilla Bug #672111 - CC doc: certServer.usrgrp.administration missing
        information
  -     Bugzilla Bug #583825 - CC: Obsolete servlets to be removed from web.xml
        as part of CC interface review
  -     Bugzilla Bug #672333 - Creation of RA agent fails in IPA installation
  -     Bugzilla Bug #674917 - Restore identification of Tomcat-based PKI
        subsystem instances
  - 'pki-silent'
  -     Bugzilla Bug #673614 - CC: Review of cryptographic algorithms provided
        by 'netscape.security.provider' package


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.3-1
changelog:
  - 'pki-common'
  -     Bugzilla Bug #674894 - ipactl restart : an annoy output line
  -     Bugzilla Bug #675179 - ipactl restart : an annoy output line


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.3-2
changelog:
  - 'pki-common'
  -     Bugzilla Bug #676051 - IPA installation failing - Fails to create CA
        instance
  -     Bugzilla Bug #676182 - IPA installation failing - Fails to create CA
        instance


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.4-1
changelog:
  - Bugzilla Bug #688763 - Rebase updated Dogtag Packages for Fedora 15 (alpha)
  - Bugzilla Bug #676182 - IPA installation failing - Fails to create CA
    instance
  - Bugzilla Bug #675742 - Profile caIPAserviceCert Not Found
  - 'pki-setup'
  -     Bugzilla Bug #678157 - uninitialized variable warnings from Perl
  -     Bugzilla Bug #679574 - Velocity fails to load all dependent classes
  -     Bugzilla Bug #680420 - xml-commons-apis.jar dependency
  -     Bugzilla Bug #682013 - pkisilent needs xml-commons-apis.jar in it's
        classpath
  -     Bugzilla Bug #673508 - CS8 64 bit pkicreate script uses wrong library
        name for SafeNet LunaSA
  - 'pki-common'
  -     Bugzilla Bug #673638 - Installation within IPA hangs
  -     Bugzilla Bug #678715 - netstat loop fixes needed
  -     Bugzilla Bug #673609 - CC: authorize() call needs to be added to
        getStats servlet
  - 'pki-selinux'
  -     Bugzilla Bug #674195: SELinux error message thrown during token
        enrollment
  - 'pki-ca'
  -     Bugzilla Bug #673638 - Installation within IPA hangs
  -     Bugzilla Bug #673609 - CC: authorize() call needs to be added to
        getStats servlet
  -     Bugzilla Bug #676330 - init script cannot start service
  - 'pki-silent'
  -     Bugzilla Bug #682013 - pkisilent needs xml-commons-apis.jar in it's
        classpath


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.5-1
changelog:
  - Bugzilla Bug #690950 - Update Dogtag Packages for Fedora 15 (beta)
  - Require "jss >= 4.2.6-15" as a build and runtime requirement
  - Require "tomcatjss >= 2.1.1" as a build and runtime requirement
    for Fedora 15 and later platforms
  - 'pki-setup'
  -     Bugzilla Bug #688287 - Add "deprecation" notice regarding using
        "shared ports" in pkicreate -help . . .
  -     Bugzilla Bug #688251 - Dogtag installation under IPA takes
        too much time - SELinux policy compilation
  - 'pki-symkey'
  - 'pki-native-tools'
  - 'pki-util'
  - 'pki-java-tools'
  -     Bugzilla Bug #689501 - ExtJoiner tool fails to join the multiple
        extensions
  - 'pki-common'
  -     Bugzilla Bug #683581 - CA configuration with ECC(Default
        EC curve-nistp521) CA fails with 'signing operation failed'
  -     Bugzilla Bug #689662 - ocsp publishing needs to be re-enabled
        on the EE port
  - 'pki-selinux'
  -     Bugzilla Bug #684871 - ldaps selinux link change
  - 'pki-ca'
  -     Bugzilla Bug #683581 - CA configuration with ECC(Default
        EC curve-nistp521) CA fails with 'signing operation failed'
  -     Bugzilla Bug #684381 - CS.cfg specifies incorrect type of comments
  -     Bugzilla Bug #689453 - CRMFPopClient request to CA's unsecure port
        throws file not found exception.(profile and CS.cfg only)
  - 'pki-silent'


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.6-1
changelog:
  - Bugzilla Bug #690950 - Update Dogtag Packages for Fedora 15 (beta)
  - Bugzilla Bug #693327 - Missing requires: tomcatjss
  - 'pki-setup'
  -     Bugzilla Bug #690626 - pkiremove removes the registry entry for
        all instances on a machine
  - 'pki-symkey'
  - 'pki-native-tools'
  - 'pki-util'
  - 'pki-java-tools'
  -     Bugzilla Bug #689453 - CRMFPopClient request to CA's unsecure port
        throws file not found exception.
  - 'pki-common'
  -     Bugzilla Bug #692990 - Audit log messages needed to match CC doc:
        DRM Recovery audit log messages
  - 'pki-selinux'
  - 'pki-ca'
  - 'pki-silent'


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.7-1
changelog:
  - 'pki-setup'
  -     Bugzilla Bug #693815 - /var/log/tomcat6/catalina.out owned by pkiuser
  -     Bugzilla Bug #694569 - parameter used by pkiremove not updated
  - 'pki-symkey'
  - 'pki-native-tools'
  - 'pki-util'
  - 'pki-java-tools'
  - 'pki-common'
  -     Bugzilla Bug #695403 - Editing signedaudit or transaction, system logs
        throws 'Invalid protocol' for OCSP subsystems
  -     Bugzilla Bug #694569 - parameter used by pkiremove not updated
  -     Bugzilla Bug #695015 - Serial No. of a revoked certificate is not
        populated in the CA signedAudit messages
  -     Bugzilla Bug #694143 - CA Agent not returning specified request
  -     Bugzilla Bug #695015 - Serial No. of a revoked certificate is not
        populated in the CA signedAudit messages
  -     Bugzilla Bug #698885 - Race conditions during IPA installation
  - 'pki-selinux'
  - 'pki-ca'
  -     Bugzilla Bug #693815 - /var/log/tomcat6/catalina.out owned by pkiuser
  -     Bugzilla Bug #699837 - service command is not fully backwards compatible
        with Dogtag pki subsystems
  - 'pki-silent'


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.8-1
changelog:
  - 'pki-setup'
  - 'pki-symkey'
  - 'pki-native-tools'
  - 'pki-util'
  - 'pki-java-tools'
  -     Bugzilla Bug #532548 - Tool to do DRM re-key
  - 'pki-common'
  - 'pki-selinux'
  - 'pki-ca'
  - 'pki-silent'


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.8-2
changelog:
  - 'pki-setup'
  - 'pki-symkey'
  - 'pki-native-tools'
  - 'pki-util'
  - 'pki-java-tools'
  -     Added 'DRMTool.cfg' configuration file to inventory
  - 'pki-common'
  - 'pki-selinux'
  - 'pki-ca'
  - 'pki-silent'


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.9-1
changelog:
  - Updated release of 'jss'
  - Updated release of 'tomcatjss' for Fedora 15
  - 'pki-setup'
  -      Bugzilla Bug #695157 - Auditverify on TPS audit log throws error.
         (mharmsen)
  -      Bugzilla Bug #693815 - /var/log/tomcat6/catalina.out owned by pkiuser
         (jdennis)
  -      Bugzilla Bug #694569 - parameter used by pkiremove not updated (alee)
  -      Bugzilla Bug #669226 - Remove Legacy Build System (mharmsen)
  - 'pki-symkey'
  -      Bugzilla Bug #695157 - Auditverify on TPS audit log throws error.
         (mharmsen)
  -      Bugzilla Bug #669226 - Remove Legacy Build System (mharmsen)
  - 'pki-native-tools'
  -      Bugzilla Bug #695157 - Auditverify on TPS audit log throws error.
         (mharmsen)
  -      Bugzilla Bug #717765 - TPS configuration: logging into security domain
         from tps does not work with clientauth=want. (alee)
  -      Bugzilla Bug #669226 - Remove Legacy Build System (mharmsen)
  - 'pki-util'
  -      Bugzilla Bug #695157 - Auditverify on TPS audit log throws error.
         (mharmsen)
  -      Bugzilla Bug #669226 - Remove Legacy Build System (mharmsen)
  - 'pki-java-tools'
  -      Bugzilla Bug #695157 - Auditverify on TPS audit log throws error.
         (mharmsen)
  -      Bugzilla Bug #532548 - Tool to do DRM re-key (mharmsen)
  -      Bugzilla Bug #532548 - Tool to do DRM re-key (config file and record
         processing) (mharmsen)
  -      Bugzilla Bug #532548 - Tool to do DRM re-key (tweaks) (mharmsen)
  -      Bugzilla Bug #669226 - Remove Legacy Build System (mharmsen)
  - 'pki-common'
  -      Bugzilla Bug #695157 - Auditverify on TPS audit log throws error.
         (mharmsen)
  -      Bugzilla Bug #695403 - Editing signedaudit or transaction, system
         logs throws 'Invalid protocol' for OCSP subsystems (alee)
  -      Bugzilla Bug #694569 - parameter used by pkiremove not updated (alee)
  -      Bugzilla Bug #695015 - Serial No. of a revoked certificate is not
         populated in the CA signedAudit messages (alee)
  -      Bugzilla Bug #694143 - CA Agent not returning specified request (awnuk)
  -      Bugzilla Bug #695015 - Serial No. of a revoked certificate is not
         populated in the CA signedAudit messages (jmagne)
  -      Bugzilla Bug #698885 - Race conditions during IPA installation (alee)
  -      Bugzilla Bug #704792 - CC_LAB_EVAL: CA agent interface:
         SubjectID=$Unidentified$ fails audit evaluation (jmagne)
  -      Bugzilla Bug #705914 - SCEP mishandles nicknames when processing
         subsequent SCEP requests. (awnuk)
  -      Bugzilla Bug #661142 - Verification should fail when a revoked
         certificate is added. (jmagne)
  -      Bugzilla Bug #707416 - CC_LAB_EVAL: Security Domain: missing audit msgs
         for modify/add (alee)
  -      Bugzilla Bug #707416 - additional audit messages for GetCookie (alee)
  -      Bugzilla Bug #707607 - Published certificate summary has list of
         non-published certificates with succeeded status (jmagne)
  -      Bugzilla Bug #717813 - EV_AUDIT_LOG_SHUTDOWN audit log not generated
         for tps and ca on server shutdown (jmagne)
  -      Bugzilla Bug #697939 - DRM signed audit log message - operation should
         be read instead of modify (jmagne)
  -      Bugzilla Bug #718427 - When audit log is full, server continue to
         function. (alee)
  -      Bugzilla Bug #718607 - CC_LAB_EVAL: No AUTH message is generated in
         CA's signedaudit log when a directory based user enrollment is
         performed (jmagne)
  -      Bugzilla Bug #669226 - Remove Legacy Build System (mharmsen)
  - 'pki-selinux'
  -      Bugzilla Bug #695157 - Auditverify on TPS audit log throws error.
         (mharmsen)
  -      Bugzilla Bug #720503 - RA and TPS require additional SELinux
         permissions to run in "Enforcing" mode (alee)
  -      Bugzilla Bug #669226 - Remove Legacy Build System (mharmsen)
  - 'pki-ca'
  -      Bugzilla Bug #695157 - Auditverify on TPS audit log throws error.
         (mharmsen)
  -      Bugzilla Bug #693815 - /var/log/tomcat6/catalina.out owned by pkiuser
         (jdennis)
  -      Bugzilla Bug #699837 - service command is not fully backwards
         compatible with Dogtag pki subsystems (mharmsen)
  -      Bugzilla Bug #649910 - Console: an auditor or agent can be added to an
         administrator group. (jmagne)
  -      Bugzilla Bug #707416 - CC_LAB_EVAL: Security Domain: missing audit msgs
         for modify/add (alee)
  -      Bugzilla Bug #716269 - make ra authenticated profiles non-visible on ee
         pages (alee)
  -      Bugzilla Bug #718621 - CC_LAB_EVAL: PRIVATE_KEY_ARCHIVE_REQUEST occurs
         for a revocation invoked by EE user (awnuk)
  -      Bugzilla Bug #669226 - Remove Legacy Build System (mharmsen)
  - 'pki-silent'
  -      Bugzilla Bug #695157 - Auditverify on TPS audit log throws error.
         (mharmsen)
  -      Bugzilla Bug #669226 - Remove Legacy Build System (mharmsen)


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.10-1
changelog:
  - 'pki-setup'
  - 'pki-symkey'
  - 'pki-native-tools'
  - 'pki-util'
  -      Bugzilla Bug #719007 - Key Constraint keyParameter being ignored
         using an ECC CA to generate ECC certs from CRMF. (jmagne)
  -      Bugzilla Bug #716307 - rhcs80 - DER shall not include an encoding
         for any component value which is equal to its default value (alee)
  - 'pki-java-tools'
  - 'pki-common'
  -      Bugzilla Bug #720510 - Console: Adding a certificate into nethsm
         throws Token not found error. (jmagne)
  -      Bugzilla Bug #719007 - Key Constraint keyParameter being ignored
         using an ECC CA to generate ECC certs from CRMF. (jmagne)
  -      Bugzilla Bug #716307 - rhcs80 - DER shall not include an encoding
         for any component value which is equal to its default value (alee)
  -      Bugzilla Bug #722989 - Registering an agent when a subsystem is
         created - does not log AUTHZ_SUCCESS event. (alee)
  - 'pki-selinux'
  - 'pki-ca'
  -      Bugzilla Bug #719113 - Add client usage flag to caIPAserviceCert
         (awnuk)
  - 'pki-silent'


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.11-1
changelog:
  - 'pki-setup'
  -      Bugzilla Bug #689909 - Dogtag installation under IPA takes too much
         time - remove the inefficient sleeps (alee)
  - 'pki-symkey'
  - 'pki-native-tools'
  - 'pki-util'
  - 'pki-java-tools'
  -      Bugzilla Bug #724861 - DRMTool: fix duplicate "dn:" records by
         renumbering "cn=<value>" (mharmsen)
  - 'pki-common'
  -      Bugzilla Bug #717041 - Improve escaping of some enrollment inputs like
         (jmagne, awnuk)
  -      Bugzilla Bug #689909 - Dogtag installation under IPA takes too much
         time - remove the inefficient sleeps (alee)
  -      Bugzilla Bug #708075 - Clone installation does not work over NAT
         (alee)
  -      Bugzilla Bug #726785 - If replication fails while setting up a clone
         it will wait forever (alee)
  -      Bugzilla Bug #728332 - xml output has changed on cert requests (awnuk)
  -      Bugzilla Bug #700505 - pki tomcat6 instances currently running
         unconfined (alee)
  - 'pki-selinux'
  -      Bugzilla Bug #700505 - pki tomcat6 instances currently running
         unconfined (alee)
  - 'pki-ca'
  -      Bugzilla Bug #728605 - RFE: increase default validity from 6mo to 2yrs
         in IPA profile (awnuk)
  - 'pki-silent'
  -      Bugzilla Bug #689909 - Dogtag installation under IPA takes too much
         time - remove the inefficient sleeps (alee)


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.12-1
changelog:
  - 'pki-setup'
  -      Bugzilla Bug #712931 - CS requires too many ports
         to be open in the FW (alee)
  - 'pki-symkey'
  - 'pki-native-tools'
  -      Bugzilla Bug #717643 - Fopen without NULL check and other Coverity
         issues (awnuk)
  -      Bugzilla Bug #730801 - Coverity issues in native-tools area (awnuk)
  - 'pki-util'
  - 'pki-java-tools'
  - 'pki-common'
  -      Bugzilla Bug #700522 - pki tomcat6 instances currently running
         unconfined, allow server to come up when selinux disabled (alee)
  -      Bugzilla Bug #731741 - some CS.cfg nickname parameters not updated
         correctly when subsystem cloned (using hsm) (alee)
  -      Bugzilla Bug #712931 - CS requires too many ports
         to be open in the FW (alee)
  - 'pki-selinux'
  -      Bugzilla Bug #712931 - CS requires too many ports
         to be open in the FW (alee)
  - 'pki-ca'
  -      Bugzilla Bug #712931 - CS requires too many ports
         to be open in the FW (alee)
  - 'pki-silent'


author: Ade Lee <alee@redhat.com> 9.0.13-1
changelog:
  - 'pki-setup'
  -      Bugzilla Bug #699809 - Convert CS to use systemd (alee)
  - 'pki-ca'
  -      Bugzilla Bug #699809 - Convert CS to use systemd (alee)
  - 'pki-common'
  -      Bugzilla Bug #699809 - Convert CS to use systemd (alee)


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.14-1
changelog:
  - 'pki-setup'
  -      Bugzilla Bug #734590 - Refactor JNI libraries for Fedora 16+ . . .
  - 'pki-symkey'
  -      Bugzilla Bug #734590 - Refactor JNI libraries for Fedora 16+ . . .
  - 'pki-native-tools'
  - 'pki-util'
  -      Bugzilla Bug #734590 - Refactor JNI libraries for Fedora 16+ . . .
  - 'pki-java-tools'
  -      Bugzilla Bug #734590 - Refactor JNI libraries for Fedora 16+ . . .
  - 'pki-common'
  -      Bugzilla Bug #734590 - Refactor JNI libraries for Fedora 16+ . . .
  - 'pki-selinux'
  - 'pki-ca'
  -      Bugzilla Bug #734590 - Refactor JNI libraries for Fedora 16+ . . .
  -      Bugzilla Bug #699809 - Convert CS to use systemd (alee)
  - 'pki-silent'
  -      Bugzilla Bug #734590 - Refactor JNI libraries for Fedora 16+ . . .


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.15-1
changelog:
  - Bugzilla Bug #734590 - Refactor JNI libraries for Fedora 16+ . . . (mharmsen)
  - Bugzilla Bug #699809 - Convert CS to use systemd (alee)
  - 'pki-setup'
  -      Bugzilla Bug #730146 - SSL handshake picks non-FIPS ciphers in FIPS
         mode (cfu)
  -      Bugzilla Bug #737192 - Need script to upgrade proxy configuration (alee)
  - 'pki-symkey'
  -      Bugzilla Bug #730162 - TPS/TKS token enrollment failure in FIPS mode
         (hsm+NSS). (jmagne)
  - 'pki-native-tools'
  -      Bugzilla Bug #730801 - Coverity issues in native-tools area (awnuk)
  -      Bugzilla Bug #730146 - SSL handshake picks non-FIPS ciphers in FIPS
         mode (cfu)
  - 'pki-util'
  -      Bugzilla Bug #730146 - SSL handshake picks non-FIPS ciphers in FIPS
         mode (cfu)
  - 'pki-java-tools'
  - 'pki-common'
  -      Bugzilla Bug #730146 - SSL handshake picks non-FIPS ciphers in FIPS
         mode (cfu)
  -      Bugzilla Bug #737218 - Incorrect request attribute name matching
         ignores request attributes during request parsing. (awnuk)
  -      Bugzilla Bug #730162 - TPS/TKS token enrollment failure in FIPS mode
         (hsm+NSS). (jmagne)
  - 'pki-selinux'
  -      Bugzilla Bug #739708 - pki-selinux lacks rules in F16 (alee)
  - 'pki-ca'
  -      Bugzilla Bug #712931 - CS requires too many ports
         to be open in the FW (alee)
  -      Bugzilla Bug #730146 - SSL handshake picks non-FIPS ciphers in FIPS
         mode (cfu)
  - 'pki-silent'
  -      Bugzilla Bug #739201 - pkisilent does not take arch into account
         as Java packages migrated to arch-dependent directories (mharmsen)


author: Matthew Harmsen <mharmsen@redhat.com> 9.0.16-1
changelog:
  - 'pki-setup'
  - 'pki-symkey'
  - 'pki-native-tools'
  - 'pki-util'
  -      Bugzilla Bug #737122 - DRM: during archiving and recovering,
         wrapping unwrapping keys should be done in the token (cfu)
  - 'pki-java-tools'
  - 'pki-common'
  -      Bugzilla Bug #744797 - KRA key recovery (retrieve pkcs#12) fails after
         the in-place upgrade( CS 8.0->8.1) (cfu)
  - 'pki-selinux'
  - 'pki-ca'
  -      Bugzilla Bug #746367 - Typo in the profile name. (jmagne)
  -      Bugzilla Bug #737122 - DRM: during archiving and recovering,
         wrapping unwrapping keys should be done in the token (cfu)
  -      Bugzilla Bug #749927 - Java class conflicts using Java 7 in Fedora 17
         (rawhide) . . . (mharmsen)
  -      Bugzilla Bug #749945 - Installation error reported during CA, DRM,
         OCSP, and TKS package installation . . . (mharmsen)
  - 'pki-silent'


author: Matthew Harmsen <mharmsen@redhat.com> 10.0.0-0.2.a1
changelog:
  - Integrated 'pki-kra' into 'pki-core'
  - Integrated 'pki-ocsp' into 'pki-core'
  - Integrated 'pki-tks' into 'pki-core'
  - Bugzilla Bug #788787 - added 'junit'/'junit4' build-time requirements


author: Matthew Harmsen <mharmsen@redhat.com> 10.0.0-0.3.a1
changelog:
  - Add '-DSYSTEMD_LIB_INSTALL_DIR' override flag to 'cmake' to address changes
    in fundamental path structure in Fedora 17
  - 'pki-setup'
  -      Hard-code Perl dependencies to protect against bugs such as
         Bugzilla Bug #772699 - Adapt perl and python fileattrs to
         changed file 5.10 magics
  - 'pki-selinux'
  -      Bugzilla Bug #795966 - pki-selinux policy is kind of a mess


author: Ade Lee <alee@redhat.com> 10.0.0-0.5.a1
changelog:
  - 'pki-selinux'
  -      Added platform-dependent patches for SELinux component
  -      Bugzilla Bug #739708 - Selinux fix for ephemeral ports (F16)
  -      Bugzilla Bug #795966 - pki-selinux policy is kind of a mess (F17)


author: Matthew Harmsen <mharmsen@redhat.com> 10.0.0-0.7.a1
changelog:
  - For 'mock' purposes, removed platform-specific logic from around
    the 'patch' files so that ALL 'patch' files will be included in
    the SRPM.


author: Matthew Harmsen <mharmsen@redhat.com> 10.0.0-0.9.a1
changelog:
  - Initial attempt at PKI deployment framework described in
    'http://pki.fedoraproject.org/wiki/PKI_Instance_Deployment'.


author: Ade Lee <alee@redhat.com> 10.0.0-0.11.a1
changelog:
  - BZ 802396 - Change location of TOMCAT_LOG to match tomcat6 changes
  - Corrected patch selected for selinux f17 rules


author: Matthew Harmsen <mharmsen@redhat.com> 10.0.0-0.16.a1
changelog:
  - Integration of Tomcat 7
  - Addition of centralized 'pki-tomcatd' systemd functionality to the
    PKI Deployment strategy
  - Removal of 'pki_flavor' attribute


author: Matthew Harmsen <mharmsen@redhat.com> 10.0.0-0.23.a1
changelog:
  - Updated release of 'tomcatjss' to rely on Tomcat 7 for Fedora 17
  - Changed Dogtag 10 build-time and runtime requirements for 'pki-deploy'
  - Altered PKI Package Dependency Chain (top-to-bottom):
    pki-ca, pki-kra, pki-ocsp, pki-tks --> pki-deploy --> pki-common


author: Endi S. Dewata <edewata@redhat.com> 10.0.0-0.24.a1
changelog:
  - Split pki-common into pki-base and pki-server.
  - Merged pki-util into pki-base.
  - Merged pki-deploy into pki-server.


author: Endi S. Dewata <edewata@redhat.com> 10.0.0-0.25.a1
changelog:
  - Merged pki-native-tools and pki-java-tools into pki-tools.
  - Modified pki-server to depend on pki-tools.


author: Matthew Harmsen <mharmsen@redhat.com> 10.0.0-0.32.a1
changelog:
  - TRAC Ticket #312 - Dogtag 10: Automatically restart any running instances
    upon RPM "update" . . .
  - TRAC Ticket #317 - Dogtag 10: Move "pkispawn"/"pkidestroy"
    from /usr/bin to /usr/sbin . . .


author: Ade Lee <alee@redhat.com> 10.0.0-0.53.b3
changelog:
  - Cleaned up spec file to provide only support rhel 7+, f17+
  - Added resteasy-base dependency for rhel 7
  - Update cmake version


author: Matthew Harmsen <mharmsen@redhat.com> 10.0.0-0.56.b3
changelog:
  - TRAC Ticket #315 - Man pages for pkispawn/pkidestroy.
  - Added place-holders for 'pki.1' and 'pki_default.cfg.5' man pages.


author: Matthew Harmsen <mharmsen@redhat.com> 10.0.0-4
changelog:
  - TRAC Ticket #469 - Dogtag 10: Fix tomcatjss issue in pki-core.spec and
    dogtag-pki.spec . . .
  - TRAC Ticket #468 - pkispawn throws exception


author: Ade Lee <alee@redhat.com> 10.0.1-1
changelog:
  - TRAC Ticket 214 - Missing error description for duplicate user
  - TRAC Ticket 213 - Add nonces for cert revocation
  - TRAC Ticket 367 - pkidestroy does not remove connector
  - TRAC Ticket #430 - License for 3rd party code
  - Bugzilla Bug 839426 - [RFE] ECC CRL support for OCSP
  - Fix spec file to allow f17 to work with latest tomcatjss
  - TRAC Ticket 466 - Increase root CA validity to 20 years
  - TRAC Ticket 469 - Fix tomcatjss issue in spec files
  - TRAC Ticket 468 - pkispawn throws exception
  - TRAC Ticket 191 - Mapping HTTP Exceptions to HTTP error codes
  - TRAC Ticket 271 - Dogtag 10: Fix 'status' command in 'pkidaemon' . . .
  - TRAC Ticket 437 - Make admin cert p12 file location configurable
  - TRAC Ticket 393 - pkispawn fails when selinux is disabled
  - Punctuation and formatting changes in man pages
  - Revert to using default config file for pkidestroy
  - Hardcode setting of resteasy-lib for instance
  - TRAC Ticket 436 - Interpolation for pki_subsystem
  - TRAC Ticket 433 - Interpolation for paths
  - TRAC Ticket 435 - Identical instance id and instance name
  - TRAC Ticket 406 - Replace file dependencies with package dependencies


author: Matthew Harmsen <mharmsen@redhat.com> 10.0.1-2
changelog:
  - Removed runtime dependency on 'pki-server-theme' to resolve
    Bugzilla Bug #916134 - unresolved dependency in pki-server: pki-server-theme


author: Matthew Harmsen <mharmsen@redhat.com> 10.0.1-3
changelog:
  - TRAC Ticket #517 - Clean up theme dependencies
  - TRAC Ticket #518 - Remove UI dependencies from pkispawn . . .


author: Endi S. Dewata <edewata@redhat.com> 10.0.1-9
changelog:
  - Renamed base/deploy to base/server.
  - Moved pki.conf into pki-base.
  - Removed redundant pki/server folder declaration.


author: Endi S. Dewata <edewata@redhat.com> 10.0.2-0.7
changelog:
  - Added pki-server-upgrade script and pki.server module.
  - Call upgrade scripts in %post for pki-base and pki-server.


author: Endi S. Dewata <edewata@redhat.com> 10.0.2-2
changelog:
  - Added default pki.conf in /usr/share/pki/etc
  - Create upgrade tracker on install and remove it on uninstall


author: Matthew Harmsen <mharmsen@redhat.com> 10.1.0-0.2
changelog:
  - TRAC Ticket 606 - add restart / start at boot info to pkispawn man page
  - TRAC Ticket 610 - Document limitation in using GUI install
  - TRAC Ticket 629 - Package ownership of '/usr/share/pki/etc/' directory


author: Abhishek Koneru <akoneru@redhat.com> 10.1.0.0.9
changelog:
  - Listed new packages required during build, due to issues reported
    by pylint.
  - Packages added: python-requests, python-ldap, libselinux-python,
                    policycoreutils-python


author: Ade Lee <alee@redhat.com> 10.1.0-1
changelog:
  - Trac Ticket 788 - Clean up spec files
  - Update release number for release build
  - Updated requirements for resteasy


author: Dogtag Team <pki-devel@redhat.com> 10.2.0-0.1
changelog:
  - Added option to build without server packages.
  - Replaced Jettison with Jackson.
  - Added python-nss build requirement
  - Bugzilla Bug #1057959 - pkispawn requires policycoreutils-python
  - TRAC Ticket #840 - pkispawn requires policycoreutils-python
  - Updated requirements for resteasy
  - Added template files for archive, retrieve and generate key
    requests to the client package.


author: Matthew Harmsen <mharmsen@redhat.com> - 10.2.0-0.6
changelog:
  - Bugzilla Bug #1120045 - pki-core: Switch to java-headless (build)requires --
    drop dependency on java-atk-wrapper
  - Removed 'java-atk-wrapper' dependency from 'pki-server'


author: Matthew Harmsen <mharmsen@redhat.com> - 10.2.0-0.9
changelog:
  - Merged jmagne@redhat.com's spec file changes from the stand-alone
    'pki-tps-client' package needed to build/run the native 'tpsclient'
    command line utility into this 'pki-core' spec file under the 'tps' package.
  - Original tps libararies must be built to support this native utility.
  - Modifies tps package from 'noarch' into 'architecture-specific' package


author: Ade Lee <alee@redhat.com> 10.2.0-3
changelog:
  - Disable pylint dependency for RHEL builds
  - Added jakarta-commons-httpclient requirements
  - Added tomcat version for RHEL build
  - Added resteasy-base-client for RHEL build


author: Dogtag Team <pki-devel@redhat.com> 10.2.1-0.1
changelog:
  - Updated version number to 10.2.1-0.1.
  - Added CLIs to simplify generating user certificates
  - Added enhancements to KRA Python API
  - Added a man page for pki ca-profile commands.
  - Added python api docs


author: Christina Fu <cfu@redhat.com> 10.2.1-0.2
changelog:
  - Ticket 1198 Bugzilla 1158410 add TLS range support to server.xml by
    default and upgrade (cfu)
  - PKI Trac Ticket #1211 - New release overwrites old source tarball (mharmsen)
  - up the release number to 0.2


author: Matthew Harmsen <mharmsen@redhat.com> - 10.2.1-0.4
changelog:
  - PKI TRAC Ticket #1187 - mod_perl should be removed from requirements for 10.2
  - PKI TRAC Ticket #1205 - Outdated selinux-policy dependency.
  - Removed perl(XML::LibXML), perl-Crypt-SSLeay, and perl-Mozilla-LDAP runtime
    dependencies


author: Dogtag Team <pki-devel@redhat.com> 10.2.2-0.1
changelog:
  - Updated version number to 10.2.2-0.1
  - Moved web application deployment locations.
  - Updated Resteasy and Jackson dependencies.
  - Added missing python-lxml build dependency.


author: Dogtag Team <pki-devel@redhat.com> 10.2.7-0.3
changelog:
  - Added dep on tomcat-servlet-3.1-api [Fedora 23 and later] or dep on
    tomcat-servlet-3.0-api [Fedora 22 and later] to pki-tools
  - Updated dep on tomcatjss [Fedora 23 and later]


author: Dogtag Team <pki-devel@redhat.com> 10.3.0.a1-2
changelog:
  - PKI TRAC Ticket #1625 - Allow multiple ACLs of same name
    (union of rules) [ftweedal]
  - PKI TRAC Ticket #2237 - Add CRL dist points extension to OIDMap
    unconditionally [edewata]
  - PKI TRAC Ticket #1803 - Removed unnecessary URL encoding for admin cert
    request. [edewata]
  - PKI TRAC Ticket #1742 - Added support for cloning 3rd-party CA
    certificates. [edewata]
  - PKI TRAC Ticket #1482 - Added TPS token filter dialog. [edewata]
  - PKI TRAC Ticket #1808 - Fixed illegal token state transition
    via TEMP_LOST. [edewata]


author: Dogtag Team <pki-devel@redhat.com> 10.3.3-3
changelog:
  - PKI TRAC Ticket #691  - [MAN] pki-server man pages (mharmsen)
  - PKI TRAC Ticket #1114 - [MAN] Generting Symmetric key fails with
    key-generate when --usages verify is passed (jmagne)
  - PKI TRAC Ticket #1306 - [RFE] Add granularity to token termination in TPS
    (cfu)
  - PKI TRAC Ticket #1308 - [RFE] Provide ability to perform off-card key
    generation for non-encryption token keys (cfu)
  - PKI TRAC Ticket #1405 - [MAN] Add additional HSM details to
    'pki_default.cfg' & 'pkispawn' man pages (mharmsen)
  - PKI TRAC Ticket #1607 - [MAN] man pkispawn has inadequate description for
    shared vs non shared tomcat instance installation (mharmsen)
  - PKI TRAC Ticket #1664 - [BUG] Add ability to disallow TPS to enroll a single
    user on multiple tokens. (jmagne)
  - PKI TRAC Ticket #1711 - CLI :: pki-server ca-cert-request-find throws
    IOError (edewata, ftweedal)
  - PKI TRAC Ticket #2285 - freeipa fails to start correctly after pki-core
    update on upgraded system (ftweedal)
  - PKI TRAC Ticket #2311 - When pki_token_name=Internal, consider normalizing
    it to "internal" (mharmsen)
  - PKI TRAC Ticket #2349 - Separated TPS does not automatically receive shared
    secret from remote TKS (jmagne)
  - PKI TRAC Ticket #2364 - CLI :: pki-server ca-cert-request-show throws
    attribute error (ftweedal)
  - PKI TRAC Ticket #2368 - pki-server subsystem subcommands throws error with
    --help option (edewata)
  - PKI TRAC Ticket #2374 - KRA cloning overwrites CA signing certificate trust
    flags (edewata)
  - PKI TRAC Ticket #2380 - Pki-server instance commands throws exception while
    specifying invalid parameters. (edewata)
  - PKI TRAC Ticket #2384 - CA installation with HSM prompts for HSM password
    during silent installation (edewata)
  - PKI TRAC Ticket #2385 - Upgraded CA lacks ca.sslserver.certreq in CS.cfg
    (ftweedal)
  - PKI TRAC Ticket #2387 - Add config for default OCSP URI if none given
    (ftweedal)
  - PKI TRAC Ticket #2388 - CA creation responds 500 if certificate issuance
    fails (ftweedal)
  - PKI TRAC Ticket #2389 - Installation: subsystem certs could have notAfter
    beyond CA signing cert in case of external or existing CA (cfu)
  - PKI TRAC Ticket #2390 - Dogtag 10.3.4: Miscellaneous Enhancements
    (akasurde, edewata)


author: Dogtag Team <pki-devel@redhat.com> 10.3.3-5
changelog:
  - PKI TRAC Ticket #978  - TPS connector man page: add revocation routing
    info (cfu)
  - PKI TRAC Ticket #1285 - [MAN] Apply 'generateCRMFRequest() removed from
    Firefox' workarounds to appropriate 'pki' man page (jmagne)
  - PKI TRAC Ticket #2246 - [MAN] Man Page: AuditVerify (cfu)
  - PKI TRAC Ticket #2381 - Throws exception while providing invalid module.
    (edewata)
  - PKI TRAC Ticket #2383 - CLI :: pki client-cert-request --extractable
    should accept only boolean value (edewata)
  - PKI TRAC Ticket #2389 - Installation: subsystem certs could have notAfter
    beyond CA signing cert in case of external or existing CA (cfu)
  - PKI TRAC Ticket #2399 - Dogtag 10.3.5: Miscellaneous Enhancements
    (akasurde, alee, cheimes, edewata, jmagne, mharmsen)
  - PKI TRAC Ticket #2401 - pkispawn calls dnsdomainname even if it does not
    rpm-require hostname (mharmsen)
  - PKI TRAC Ticket #2402 - Conflict in file ownership in pki-base and
    pki-server (cheimes)
  - PKI TRAC Ticket #2403 - Deployment problem with RESTEasy 3.0.17 (edewata)
  - PKI TRAC Ticket #2406 - Make starting CRL Number configurable (jmagne)
  - PKI TRAC Ticket #2412 - pki client-cert-import --trust option does not
    apply the specified trust bits (alee)
  - PKI TRAC Ticket #2418 - [TPS] Some template substitution didn't happen
    during installation (alee)
  - PKI TRAC Ticket #2420 - CA subsystem OSCP responder fails when LWCAs are
    not used (ftweedal)
  - PKI TRAC Ticket #2421 - Incorrect SELinux contexts
    Installation/Configuration (edewata)
  - PKI TRAC Ticket #2424 - ipa-ca-install fails on replica when IPA server
    is converted from CA-less to CA-full (edewata)
  - PKI TRAC Ticket #2428 - broken request links for CA's system certs in
    agent request viewing (cfu)
  - PKI TRAC Ticket #2430 - CA Agent certificate list is not sorted by serial
    number in migration case (jmagne)
  - PKI TRAC Ticket #2431 - Errors noticed during ipa server upgrade.
    (mharmsen)
  - PKI TRAC Ticket #2433 - Lightweight CA GET <id>/chain returns bogus PEM
    data (ftweedal)


author: Dogtag Team <pki-devel@redhat.com> 10.3.3-7
changelog:
  - PKI TRAC Ticket #690 - [MAN] pki-tools man pages (mharmsen)
    - CMCEnroll
  - PKI TRAC Ticket #833 - pki user-mod fullName="" gives an error message
    "PKIException: LDAP error (21): error result" (edewata)
  - PKI TRAC Ticket #2431 - Errors noticed during ipa server upgrade.
    (cheimes, edewata, mharmsen)
  - PKI TRAC Ticket #2432 - Kra-selftest behavior is not as expected (edewata)
  - PKI TRAC Ticket #2436 - Dogtag 10.3.6: Miscellaneous Enhancements
    (edewata, mharmsen)
  - PKI TRAC Ticket #2437 - TPS UI: while adding certs for users from TPSUI pem
    format with/without header works while pkcs7 with header is not allowed
    (edewata)
  - PKI TRAC Ticket #2440 - Optional CA signing CSR for migration (edewata)


author: Dogtag Team <pki-devel@redhat.com> 10.3.3-8
changelog:
  - PKI TRAC Ticket #1578 - Authentication Instance Id PinDirEnrollment with authType value as SslclientAuth is not working (jmagne)
  - PKI TRAC TIcket #2414 - pki pkcs12-cert-del shows a successfully deleted message when a wrong nickname is provided (gkapoor)
  - PKI TRAC Ticket #2423 - pki_ca_signing_token when not specified does not fallback to pki_token_name value (edewata)
  - PKI TRAC Ticket #2436 - Dogtag 10.3.6: Miscellaneous Enhancements (akasurde) - ticket remains open
  - PKI TRAC Ticket #2439 - Outdated deployment descriptors in upgraded server(edewata)


author: Dogtag Team <pki-devel@redhat.com> 10.3.3-9
changelog:
  - PKI TRAC Ticket #1638 - Lightweight CAs: revoke certificate on CA deletion
    (ftweedal)
  - PKI TRAC Ticket #2436 - Dogtag 10.3.6: Miscellaneous Enhancements
    (edewata)
  - PKI TRAC Ticket #2443 - Prevent deletion of host CA's keys if LWCA entry
    deleted (ftweedal)
  - PKI TRAC Ticket #2444 - Authority entry without entryUSN is skipped even if
    USN plugin enabled (ftweedal)
  - PKI TRAC Ticket #2446 - pkispawn: make subject_dn defaults unique per
    instance name (for shared HSM) (cfu)
  - PKI TRAC Ticket #2447 - CertRequestInfo has incorrect URLs (vakwetu)
  - PKI TRAC Ticket #2449 - Unable to create system certificates in different
    tokens (edewata)


author: Dogtag Team <pki-devel@redhat.com> 10.3.3-10
changelog:
  - Revert Patch:  PKI TRAC Ticket #2449 - Unable to create system certificates
    in different tokens (edewata)
  - Resolves:  rhbz #1374054 - ipa-replica-install fails setting up certificate
  - Restores:  rhbz #1319557 - pkispawn KRA instance is failing server
  - Removes from Errata:  rhbz #1372041 - Unable to create system certificates
    in different tokens


author: Dogtag Team <pki-devel@redhat.com> 10.3.3-11
changelog:
  - PKI TRAC Ticket #1527 - TPS Enrollment always goes to "ca1" (cfu)
  - PKI TRAC Ticket #1664 - [BUG] Add ability to disallow TPS to enroll a single
    user on multiple tokens. (jmagne)
  - PKI TRAC Ticket #2478 - pkispawn fails as it is not able to find openssl as a
    dependency package (mharmsen)
  - PKI TRAC Ticket #2483 - Unable to read an encrypted email using renewed
    tokens (jmagne)
  - PKI TRAC Ticket #2496 - Cert/Key recovery is successful when the cert serial
    number and key id on the ldap user mismatches (cfu)
  - PKI TRAC Ticket #2505 - Fix packaging duplicates of classes in multiple jar
    files (edewata)


author: Dogtag Team <pki-devel@redhat.com> 10.3.3-12
changelog:
  - ## RHEL 7.3.z Batch Update 1
  - Bugzilla Bug #1390318 - CA EE: Submit caUserCert request without uid does
    not show proper error message (alee)
  - Bugzilla Bug #1390319 - Failed to start pki-tomcatd Service
    ("ipa-cacert-manage renew" failed?) (edewata)
  - Bugzilla Bug #1390320 - pkispawn fails as it is not able to find openssl as
    a dependency package (mharmsen)
  - Bugzilla Bug #1390321 - two-step externally-signed CA installation fails due
    to missing AuthorityID (ftweedal)
  - Bugzilla Bug #1390322 - Spurious host authority entries created (ftweedal)
  - Bugzilla Bug #1390324 - KRA installation failed against externally-signed CA
    with partial certificate chain (edewata)
  - Bugzilla Bug #1389757 - Problems with FIPS mode (edewata)
  - Bugzilla Bug #1390311 - Fix packaging duplicates of classes in multiple jar
    files (edewata)
  - Bugzilla Bug #1390325 - Typo in comment line of UserPwdDirAuthentication.java
    (edewata)
  - ## RHCS 9.1.z Batch Update 1
  - Bugzilla Bug #1248553 - TPS Enrollment always goes to "ca1" (cfu)
  - Bugzilla Bug #1274096 -  [BUG] Add ability to disallow TPS to enroll a
    single user on multiple tokens. (jmagne)
  - Bugzilla Bug #1379379 - Unable to read an encrypted email using renewed
    tokens (jmagne)
  - Bugzilla Bug #1379749 - Automatic recovery of encryption cert is not working
    when a token is physically damaged and a temporary token is issued (jmagne)
  - Bugzilla Bug #1381375 - Cert/Key recovery is successful when the cert serial
    number and key id on the ldap user mismatches
  - Bugzilla Bug #1381635 - Token format with external reg fails when
    op.format.externalRegAddToToken.revokeCert=true (cfu)
  - Bugzilla Bug #1382762 - PIN_RESET policy is not giving expected results when
    set on a token (jmagne)
  - Bugzilla Bug #1382862 - TPS token enrollment fails to setupSecureChannel
    when TPS and TKS security db is on fips mode. (jmagne)
  - Bugzilla Bug #1386257 - Changes to target.agent.approve.list parameter is
    not reflected in the TPS Web UI (edewata)


author: Dogtag Team <pki-devel@redhat.com> 10.3.3-13
changelog:
  - ## RHEL 7.3.z Batch Update 1
  - Bugzilla Bug #1389757 - Problems with FIPS mode (edewata)
    (added KRA key recovery via CLI in FIPS mode)
  - ## RHCS 9.1.z Batch Update 1
  - Reverted patches associated with
    Bugzilla Bug #1386257 - Changes to target.agent.approve.list parameter is
    not reflected in the TPS Web UI (edewata)


author: Dogtag Team <pki-devel@redhat.com> 10.3.3-14
changelog:
  - Marked the following RHCS 9.1.z bug:
    Bugzilla Bug #1382862 - TPS token enrollment fails to setupSecureChannel
    when TPS and TKS security db is on fips mode. (jmagne)
    as a duplicate of RHEL 7.3.z bug:
    Bugzilla Bug #1389757 - Problems with FIPS mode (edewata)
    and moved the patch from the RHCS 9.1.z bug to the RHEL 7.3.z bug.


author: Dogtag Team <pki-devel@redhat.com> 10.3.3-15
changelog:
  - ## RHEL 7.3.z Batch Update 2
  - Bugzilla Bug #1404173 - user-cert-add --serial CLI request to secure port
    with remote CA shows authentication failure (edewata)
  - Bugzilla Bug #1404175 -  pki ca-cert-request-submit fails presumably because
    of missing authentication even if it should not require any (edewata)
  - Bugzilla Bug #1404178 - Changes to target.agent.approve.list parameter is
    not reflected in the TPS Web UI [pki-base] (edewata)
  - Bugzilla Bug #1404172 - Unable to install subordinate CA with HSM in FIPS
    mode (edewata)
  - Bugzilla Bug #1403689 - pkispawn does not change default ecc key size from
    nistp256 when nistp384 is specified in spawn config (jmagne)
  - Bugzilla Bug #1404176 - logging properties and man pages (edewata)
  - ## RHCS 9.1.z Batch Update 2
  - Bugzilla Bug #1386257 - Changes to target.agent.approve.list parameter is
    not reflected in the TPS Web UI [pki-tps] (edewata)
  - Bugzilla Bug #1391207 - Automatic recovery of encryption cert - CA and TPS
    tokendb shows different certificate status (cfu)
  - Bugzilla Bug #1395479 -  TPS throws "err=6" when attempting to format and
    enroll G&D Cards (jmagne)


author: Dogtag Team <pki-devel@redhat.com> 10.3.3-16
changelog:
  - Separate original patches into RHEL and RHCS portions
  - ## RHEL 7.3.z Batch Update 2
  - Bugzilla Bug #1404176 - logging properties and man pages (edewata)
  - Bugzilla Bug #1405328 - TPS throws "err=6" when attempting to format and
    enroll G&D Cards (jmagne)
  - ## RHCS 9.1.z Batch Update 2
  - Bugzilla Bug #1395479 - TPS throws "err=6" when attempting to format and
    enroll G&D Cards (jmagne)
  - Bugzilla Bug #1404900 - RHCS logging properties (edewata)


author: Dan Walsh <dwalsh@redhat.com> 1.9-9
changelog:
  - Change restorecon to not follow symlinks.  It is too difficult and confusing
  - to figure out the file context for the file pointed to by a symlink.


author: Colin Walters <walters@redhat.com> 1.10-3
changelog:
  - Add patch to fall back to authenticating via uid if
    the current user's SELinux user identity is the default
    identity
  - Add BuildRequires pam-devel


author: Dan Walsh <dwalsh@redhat.com> 1.13.3-1
changelog:
  - Update latest from NSA
  - Add -o option to setfiles to save output of any files with incorrect context.


author: Dan Walsh <dwalsh@redhat.com> 1.14.1-2
changelog:
  - Fix fixfiles.cron to not run on non SELinux boxes
  - Fix several problems in fixfiles and fixfiles.cron


author: Dan Walsh <dwalsh@redhat.com> 1.17.6-1
changelog:
  - Update with NSA
  	* Added -l option to setfiles to log changes via syslog.
  	* Merged -e option to setfiles to exclude directories.
  	* Merged -R option to restorecon for recursive descent.


author: Dan Walsh <dwalsh@redhat.com> 1.19.2-1
changelog:
  - Update to latest from NSA
  	* Changed restorecon to ignore ENOENT errors from matchpathcon.
  	* Merged nonls patch from Chris PeBenito.


author: Dan Walsh <dwalsh@redhat.com> 1.19.2-4
changelog:
  - Fix fixfiles handling of rpm
  - Fix restorecon to not warn on symlinks unless -v -v
  - Fix output of verbose to show old context as well as new context


author: Dan Walsh <dwalsh@redhat.com> 1.19.3-1
changelog:
  - Update to latest from NSA
  	* Merged fixfiles and restorecon patches from Dan Walsh.
  	* Don't display change if only user part changed.


author: Dan Walsh <dwalsh@redhat.com> 1.20.1-1
changelog:
  - Update to latest from NSA
  	* Merged fixfiles rewrite from Dan Walsh.
  	* Merged restorecon patch from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.21.1-3
changelog:
  - Don't change user componant if it is all that changed unless forced.
  - Change fixfiles to concatinate file_context.local for setfiles


author: Dan Walsh <dwalsh@redhat.com> 1.21.3-1
changelog:
  - Upgrade to latest from NSA
  	* Fixed restorecon to not treat errors from is_context_customizable()
  	  as a customizable context.
  	* Merged setfiles/restorecon patch to not reset user field unless
  	  -F option is specified from Dan Walsh.
  	* Merged open_init_pty helper for run_init from Manoj Srivastava.
  	* Merged audit2allow and genhomedircon man pages from Manoj Srivastava.


author: Dan Walsh <dwalsh@redhat.com> 1.21.5-1
changelog:
  - Upgrade to latest from NSA
  	* Merged newrole -l support from Darrel Goeddel (TCS).
  - Fix genhomedircon STARTING_UID


author: Dan Walsh <dwalsh@redhat.com> 1.21.7-3
changelog:
  - Fix fixfiles patch
  - Upgrade to latest from NSA
  	* Prevent overflow of spec array in setfiles.
  - Add diff comparason between file_contexts to fixfiles
  - Allow restorecon to give an warning on file not found instead of exiting


author: Dan Walsh <dwalsh@redhat.com> 1.21.9-1
changelog:
  - More cleanup of sed patch
  - Upgrade to latest from NSA
  	* Merged updated fixfiles script from Dan Walsh.
  	* Merged updated man page for fixfiles from Dan Walsh and re-added unzipped.
  	* Reverted fixfiles patch for file_contexts.local;
  	  obsoleted by setfiles rewrite.
  	* Merged error handling patch for restorecon from Dan Walsh.
  	* Merged semi raw mode for open_init_pty helper from Manoj Srivastava.
  	* Rewrote setfiles to use matchpathcon and the new interfaces
  	  exported by libselinux (>= 1.21.5).


author: Dan Walsh <dwalsh@redhat.com> 1.21.10-1
changelog:
  - More cleanup of fixfiles sed patch
  - Upgrade to latest from NSA
  	* Merged patch for open_init_pty from Manoj Srivastava.


author: Dan Walsh <dwalsh@redhat.com> 1.21.12-1
changelog:
  - More cleanup of fixfiles sed patch
  	* Merged further patches for restorecon/setfiles -e and fixfiles -C.


author: Dan Walsh <dwalsh@redhat.com> 1.21.13-1
changelog:
  - Update from NSA
  	* Merged further change to fixfiles -C from Dan Walsh.
  	* Merged updated fixfiles script from Dan Walsh.
  - Fix error handling of restorecon


author: Dan Walsh <dwalsh@redhat.com> 1.21.17-1
changelog:
  - Update to latest from NSA
  	* Merged new genhomedircon script from Dan Walsh.
  	* Changed load_policy to call sepol_genusers().


author: Dan Walsh <dwalsh@redhat.com> 1.21.18-1
changelog:
  - Update to latest from NSA
  	* Changed load_policy to fall back to the original policy upon
  	  an error from sepol_genusers().


author: Dan Walsh <dwalsh@redhat.com> 1.21.18-2
changelog:
  - Apply Uli patch
  	* The Makefiles should use the -Wall option even if compiled in beehive
  	* Add -W, too
  	* use -Werror when used outside of beehive.  This could also be used unconditionally
  	* setfiles/setfiles.c: fix resulting warning
  	* restorecon/restorecon.c: Likewise
  	* run_init/open_init_pty.c: argc hasn't been checked, the program would crash if
  called without parameters.  ignore the return value of nice properly.
  	* run_init: don't link with -ldl lutil
  	* load_policy: that's the bad bug.  pointer to unsigned int is passed, size_t is
  written to.  fails on 64-bit archs
  	* sestatus: signed vs unsigned problem
  	* newrole: don't link with -ldl


author: Dan Walsh <dwalsh@redhat.com> 1.23.1-1
changelog:
  - Update to released version from NSA
  	* Merged rewrite of genhomedircon by Eric Paris.
  	* Changed fixfiles to relabel jfs since it now supports security xattrs
  	  (as of 2.6.11).  Removed reiserfs until 2.6.12 is released with
  	  fixed support for reiserfs and selinux.


author: Dan Walsh <dwalsh@redhat.com> 1.23.2-1
changelog:
  - Update to version from NSA
  	* Changed setfiles -c to call set_matchpathcon_flags(3) to
  	  turn off processing of .homedirs and .local.


author: Dan Walsh <dwalsh@redhat.com> 1.23.3-1
changelog:
  - Update to version from NSA
  	* Merged context validation patch for genhomedircon from Eric Paris.
  - Fix verbose output of restorecon


author: Dan Walsh <dwalsh@redhat.com> 1.23.4-1
changelog:
  - Update to version from NSA
  	* Merged load_policy is_selinux_enabled patch from Dan Walsh.
  	* Merged restorecon verbose output patch from Dan Walsh.
  	* Merged setfiles altroot patch from Chris PeBenito.


author: Dan Walsh <dwalsh@redhat.com> 1.23.5-1
changelog:
  - Update to match NSA
  	* Reverted load_policy is_selinux_enabled patch from Dan Walsh.
  	  Otherwise, an initial policy load cannot be performed using
  	  load_policy, e.g. for anaconda.


author: Dan Walsh <dwalsh@redhat.com> 1.23.6-1
changelog:
  - Update to match NSA
  	* Fixed signed/unsigned pointer bug in load_policy.
  	* Reverted context validation patch for genhomedircon.


author: Dan Walsh <dwalsh@redhat.com> 1.23.7-1
changelog:
  - Change -f flag in fixfiles to remove stuff from /tmp
  - Change -F flag to pass -F flag  to restorecon/fixfiles.  (IE Force relabel).


author: Dan Walsh <dwalsh@redhat.com> 1.23.9-1
changelog:
  - Update to match NSA
  	* Updated audit2why for sepol_ prefixes on Flask types to
  	  avoid namespace collision with libselinux, and to
  	  include <selinux/selinux.h> now.


author: Dan Walsh <dwalsh@redhat.com> 1.23.10-1
changelog:
  - Update to match NSA
  	* Extended audit2why to incorporate booleans and local user
  	  settings when analyzing audit messages.


author: Dan Walsh <dwalsh@redhat.com> 1.23.11-1
changelog:
  - Update to match NSA
  	* Merged fixfiles and newrole patch from Dan Walsh.
  	* Merged audit2why man page from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.25.5-1
changelog:
  - Update to match NSA
  	* Merged patch to move module read/write code from libsemanage
  	  to libsepol from Jason Tang (Tresys).


author: Dan Walsh <dwalsh@redhat.com> 1.25.6-1
changelog:
  - Update to match NSA
  	* Merged fixes for semodule_link and sestatus from Serge Hallyn (IBM).
  	  Bugs found by Coverity.


author: Dan Walsh <dwalsh@redhat.com> 1.25.9-1
changelog:
  - Update to match NSA
  	* Changed setfiles -c to translate the context to raw format
  	prior to calling libsepol.


author: Dan Walsh <dwalsh@redhat.com> 1.27.1-1
changelog:
  - Update to match NSA
  	* Merged error shadowing bug fix for restorecon from Dan Walsh.
  	* Merged setfiles usage/man page update for -r option from Dan Walsh.
  	* Merged fixfiles -C patch to ignore :s0 addition on update
  	  to a MCS/MLS policy from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.27.2-1
changelog:
  - Update to match NSA
  	* Merged run_init open_init_pty bug fix from Manoj Srivastava
  	  (unblock SIGCHLD).  Bug reported by Erich Schubert.


author: Dan Walsh <dwalsh@redhat.com> 1.27.3-1
changelog:
  - Update to match NSA
  	* Merged patch to update semodule to the new libsemanage API
  	and improve the user interface from Karl MacMillan (Tresys).
  	* Modified semodule for the create/connect API split.


author: Dan Walsh <dwalsh@redhat.com> 1.27.5-1
changelog:
  - Update to match NSA
  	* Fixed warnings in load_policy.
  	* Rewrote load_policy to use the new selinux_mkload_policy()
  	interface provided by libselinux.


author: Dan Walsh <dwalsh@redhat.com> 1.27.6-1
changelog:
  - Update to match NSA
  	* Updated for changes to libsepol.
  	Changed semodule and semodule_package to use the shared libsepol.
  	Disabled build of semodule_link and semodule_expand for now.
  	Updated audit2why for relocated policydb internal headers,
  	still needs to be converted to a shared lib interface.


author: Dan Walsh <dwalsh@redhat.com> 1.27.7-1
changelog:
  - Update to match NSA
  	* Updated semodule_link and semodule_expand to use shared libsepol.
  	Fixed audit2why to call policydb_init prior to policydb_read (still
  	uses the static libsepol).


author: Dan Walsh <dwalsh@redhat.com> 1.27.11-1
changelog:
  - Update to match NSA
  	* Updated semodule_expand to use get interfaces for hidden sepol_module_package type.
  	* Merged newrole and run_init pam config patches from Dan Walsh (Red Hat).
  	* Merged fixfiles patch from Dan Walsh (Red Hat).
  	* Updated semodule for removal of semanage_strerror.


author: Dan Walsh <dwalsh@redhat.com> 1.27.12-1
changelog:
  - Update to match NSA
  	* Merged non-PAM Makefile support for newrole and run_init from Timothy Wood.


author: Dan Walsh <dwalsh@redhat.com> 1.27.18-1
changelog:
  - Update to match NSA
  	* Cleaned up usage and error messages and releasing of memory by
  	semodule utilities.
  	* Corrected error reporting by semodule.
  	* Updated semodule_expand for change to sepol interface.
  	* Merged fixes for make DESTDIR= builds from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.27.19-1
changelog:
  - Update to match NSA
  	* Merged semodule support for reload, noreload, and store options
  	  from Joshua Brindle.
  	* Merged semodule_package rewrite from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.27.20-1
changelog:
  - Update to match NSA
  	* Merged setsebool patch from Ivan Gyurdiev.
  	  This moves setsebool from libselinux/utils to policycoreutils,
  	  and rewrites it to use libsemanage for permanent boolean changes.


author: Dan Walsh <dwalsh@redhat.com> 1.27.23-1
changelog:
  - Update to match NSA
  	* Changed setfiles for the context canonicalization support.
  	* Changed setsebool to call semanage_is_managed() interface
  	  and fall back to security_set_boolean_list() if policy is
  	  not managed.
  	* Merged setsebool memory leak fix from Ivan Gyurdiev.
  	* Merged setsebool patch to call semanage_set_reload_bools()
  	  interface from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.27.26-1
changelog:
  * Added -B (--build) option to semodule to force a rebuild.
  	* Reverted setsebool patch to call semanage_set_reload_bools().
  	* Changed setsebool to disable policy reload and to call
  	  security_set_boolean_list to update the runtime booleans.
  	* Changed setfiles -c to use new flag to set_matchpathcon_flags()
  	  to disable context translation by matchpathcon_init().


author: Dan Walsh <dwalsh@redhat.com> 1.27.28-2
changelog:
  - Update to match NSA
  	* Merged genhomedircon rewrite from Dan Walsh.
  - Rewrite audit2allow to python


author: Dan Walsh <dwalsh@redhat.com> 1.27.29-1
changelog:
  - Update to match NSA
  	* Merged audit2allow python script from Dan Walsh.
  	  (old script moved to audit2allow.perl, will be removed later).
  	* Merged genhomedircon fixes from Dan Walsh.
  	* Merged semodule quieting patch from Dan Walsh
  	  (inverts default, use -v to restore original behavior).


author: Dan Walsh <dwalsh@redhat.com> 1.27.30-1
changelog:
  - Update to match NSA
  	* Merged sestatus, audit2allow, and semanage patch from Dan Walsh.
  	* Fixed semodule -v option.


author: Dan Walsh <dwalsh@redhat.com> 1.27.31-1
changelog:
  - Update to match NSA
  	* Changed genhomedircon to always use user_r for the role in the
  	  managed case since user_get_defrole is broken.
  - Add te file capabilities to audit2allow
  - Add man pages for semodule


author: Dan Walsh <dwalsh@redhat.com> 1.27.33-1
changelog:
  - Update to match NSA
  	* Merged audit2allow --tefile and --fcfile support from Dan Walsh.
  	* Merged genhomedircon fix from Dan Walsh.
  	* Merged semodule* man pages from Dan Walsh, and edited them.
  	* Changed setfiles to set the MATCHPATHCON_VALIDATE flag to
  	  retain validation/canonicalization of contexts during init.


author: Dan Walsh <dwalsh@redhat.com> 1.27.35-1
changelog:
  - Update to match NSA
  	* Merged genhomedircon bug fix from Dan Walsh.
  	* Revised semodule* man pages to refer to checkmodule and
  	  to include example sections.


author: Dan Walsh <dwalsh@redhat.com> 1.27.36-1
changelog:
  - Update to match NSA
  	* Changed genhomedircon to warn on use of ROLE in homedir_template
  	  if using managed policy, as libsemanage does not yet support it.


author: Dan Walsh <dwalsh@redhat.com> 1.29.1-1
changelog:
  - Update to match NSA
  	* Merged fix for audit2allow long option list from Dan Walsh.
  	* Merged -r option for restorecon (alias for -R) from Dan Walsh.
  	* Merged chcat script and man page from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.29.2-1
changelog:
  - Fix genhomedircon to work in installer
  - Update to match NSA
  	* Merged patch for chcat script from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.29.3-1
changelog:
  - Update to match NSA
  	* Merged semanage getpwnam bug fix from Serge Hallyn (IBM).
  	* Merged patch series from Ivan Gyurdiev.
  	  This includes patches to:
  	  - cleanup setsebool
  	  - update setsebool to apply active booleans through libsemanage
  	  - update semodule to use the new semanage_set_rebuild() interface
  	  - fix various bugs in semanage
  	* Merged patch from Dan Walsh (Red Hat).
  	  This includes fixes for restorecon, chcat, fixfiles, genhomedircon,
  	  and semanage.


author: Dan Walsh <dwalsh@redhat.com> 1.29.4-1
changelog:
  - Update to match NSA
  	* Merged genhomedircon and semanage patch from Dan Walsh.
  	* Changed semodule error reporting to include argv[0].


author: Dan Walsh <dwalsh@redhat.com> 1.29.7-1
changelog:
  - Update to match NSA
  	* Merged newrole cleanup patch from Steve Grubb.
  	* Merged setfiles/restorecon performance patch from Russell Coker.
  	* Merged genhomedircon and semanage patches from Dan Walsh.
  	* Merged remove add_local/set_local patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.29.8-1
changelog:
  - Update to match NSA
  	* Merged semanage fixes from Ivan Gyurdiev.
  	* Merged semanage fixes from Russell Coker.
  	* Merged chcat, genhomedircon, and semanage diffs from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.29.11-1
changelog:
  - Added translation support to semanage
  - Update from upstream
  	* Modified newrole and run_init to use the loginuid when
  	  supported to obtain the Linux user identity to re-authenticate,
  	  and to fall back to real uid.  Dropped the use of the SELinux
  	  user identity, as Linux users are now mapped to SELinux users
  	  via seusers and the SELinux user identity space is separate.
  	* Merged semanage bug fixes from Ivan Gyurdiev.
  	* Merged semanage fixes from Russell Coker.
  	* Merged chcat.8 and genhomedircon patches from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.29.15-1
changelog:
  - Update from upstream
  	* Merged newrole audit patch from Steve Grubb.
  	* Merged seuser -> seuser local rename patch from Ivan Gyurdiev.
  	* Merged semanage and semodule access check patches from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.29.17-1
changelog:
  - Update from upstream
  	* Merged genhomedircon fix from Dan Walsh.
  	* Merged seusers.system patch from Ivan Gyurdiev.
  	* Merged improve port/fcontext API patch from Ivan Gyurdiev.
  	* Merged genhomedircon patch from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.29.20-1
changelog:
  - Update from upstream
  	* Merged seuser/user_extra support patch to semodule_package
  	  from Joshua Brindle.
  	* Merged getopt type fix for semodule_link/expand and sestatus
  	  from Chris PeBenito.
  - Fix genhomedircon output


author: Dan Walsh <dwalsh@redhat.com> 1.29.23-1
changelog:
  - Update from upstream
  	* Merged newrole -V/--version support from Glauber de Oliveira Costa.
  	* Merged genhomedircon prefix patch from Dan Walsh.
  	* Merged optionals in base patch from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.29.26-1
changelog:
  - Update from upstream
  	* Merged semanage bug fix patch from Ivan Gyurdiev.
  	* Merged improve bindings patch from Ivan Gyurdiev.
  	* Merged semanage usage patch from Ivan Gyurdiev.
  	* Merged use PyList patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.30.1-1
changelog:
  - Make audit2allow translate dontaudit as well as allow rules
  - Update from upstream
  	* Merged semanage labeling prefix patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.30.4-1
changelog:
  - Update from upstream
  	* Merged audit2allow fixes for refpolicy from Dan Walsh.
  	* Merged fixfiles patch from Dan Walsh.
  	* Merged restorecond daemon from Dan Walsh.
  	* Merged semanage non-MLS fixes from Chris PeBenito.
  	* Merged semanage and semodule man page examples from Thomas Bleher.


author: Dan Walsh <dwalsh@redhat.com> 1.30.6-1
changelog:
  - Add /etc/samba/secrets.tdb to restorecond.conf
  - Update from upstream
  	* Merged semanage prefix support from Russell Coker.
  	* Added a test to setfiles to check that the spec file is
  	  a regular file.


author: Dan Walsh <dwalsh@redhat.com> 1.30.8-1
changelog:
  - Update to upstream
  	* Merged fix warnings patch from Karl MacMillan.
  	* Merged patch from Dan Walsh.
  	  This includes audit2allow changes for analysis plugins,
  	  internationalization support for several additional programs
  	  and added po files, some fixes for semanage, and several cleanups.
  	  It also adds a new secon utility.


author: Dan Walsh <dwalsh@redhat.com> 1.30.9-1
changelog:
  - Update to upstream
  	* Fixed audit2allow and po Makefiles for DESTDIR= builds.
  	* Merged .po file patch from Dan Walsh.
  	* Merged bug fix for genhomedircon.


author: Dan Walsh <dwalsh@redhat.com> 1.30.10-1
changelog:
  - Update to upstream
  	* Merged patch with updates to audit2allow, secon, genhomedircon,
  	  and semanage from Dan Walsh.


author: James Antill <jantill@redhat.com> 1.30.10-2
changelog:
  - secon fixes for --self-exec etc.
  - secon change from level => sensitivity, add clearance.
  - Add mass relabel AUDIT patch, but disable it until kernel problem solved.


author: Dan Walsh <dwalsh@redhat.com> 1.30.11-1
changelog:
  - Update to upstream
  	* Merged more translations from Dan Walsh.
  	* Merged patch to relocate setfiles to /sbin for early relabel
  	  when /usr might not be mounted from Dan Walsh.
  	* Merged semanage/seobject patch to preserve fcontext ordering in list.
  	* Merged secon patch from James Antill.


author: Dan Walsh <dwalsh@redhat.com> 1.30.14-1
changelog:
  - Update to upstream
  	* Merged fix for setsebool error path from Serge Hallyn.
  	* Merged patch from Dan Walsh with:
  	*    Updated po files.
  	*    Fixes for genhomedircon and seobject.
  	*    Audit message for mass relabel by setfiles.


author: Dan Walsh <dwalsh@redhat.com> 1.30.17-1
changelog:
  - Update to upstream
  	* Lindent.
  	* Merged patch from Dan Walsh with:
  	  * -p option (progress) for setfiles and restorecon.
  	  * disable context translation for setfiles and restorecon.
  	  * on/off values for setsebool.
  	* Merged setfiles and semodule_link fixes from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.30.22-1
changelog:
  - Update to upstream
  	* Merged restorecond size_t fix from Joshua Brindle.
  	* Merged secon keycreate patch from Michael LeMay.
  	* Merged restorecond fixes from Dan Walsh.
  	  Merged updated po files from Dan Walsh.
  	* Merged python gettext patch from Stephen Bennett.
  	* Merged semodule_deps from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> 1.30.25-1
changelog:
  - Update to upstream
  	* Merged patch from Dan Walsh with:
  		* audit2allow: process MAC_POLICY_LOAD events
  		* newrole: run shell with - prefix to start a login shell
  		* po: po file updates
  		* restorecond: bail if SELinux not enabled
  		* fixfiles: omit -q
  		* genhomedircon:  fix exit code if non-root
  		* semodule_deps:  install man page
  	* Merged secon Makefile fix from Joshua Brindle.
  	* Merged netfilter contexts support patch from Chris PeBenito.


author: Dan Walsh <dwalsh@redhat.com> 1.30.26-1
changelog:
  - Update to upstream
  	* Merged semanage local file contexts patch from Chris PeBenito.
  - Fix fixfiles log creation
  - More translations


author: Dan Walsh <dwalsh@redhat.com> 1.30.27-4
changelog:
  - Add -i qualified to restorecon to tell it to ignore files that do not exist
  - Fixfiles also modified for this change


author: Dan Walsh <dwalsh@redhat.com> 1.30.28-1
changelog:
  - Security fixes to run python in a more locked down manner
  - More Translations
  - Update to upstream
  	* Merged fix for restorecon // handling from Erich Schubert.
  	* Merged translations update and fixfiles fix from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.30.28-6
changelog:
  - Change setfiles and restorecon to use stderr except for -o flag
  - Also -o flag will now output files


author: Dan Walsh <dwalsh@redhat.com> 1.30.30-1
changelog:
  - Update to upstream
  	* Merged newrole auditing of failures due to user actions from
  	  Michael Thompson.


author: Dan Walsh <dwalsh@redhat.com> 1.32-1
changelog:
  - Add newrole audit patch from sgrubb
  - Update to upstream
  	* Merged audit2allow -l fix from Yuichi Nakamura.
  	* Merged restorecon -i and -o - support from Karl MacMillan.
  	* Merged semanage/seobject fix from Dan Walsh.
  	* Merged fixfiles -R and verify changes from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.33.4-1
changelog:
  - Upstream accepted my patches
  	* Merged setsebool patch from Karl MacMillan.
  	  This fixes a bug reported by Yuichi Nakamura with
  	  always setting booleans persistently on an unmanaged system.


author: Dan Walsh <dwalsh@redhat.com> 1.33.6-1
changelog:
  - Update to upstream
  	* Patch from Dan Walsh to add an pam_acct_msg call to run_init
  	* Patch from Dan Walsh to fix error code returns in newrole
  	* Patch from Dan Walsh to remove verbose flag from semanage man page
  	* Patch from Dan Walsh to make audit2allow use refpolicy Makefile
  	  in /usr/share/selinux/<SELINUXTYPE>


author: Dan Walsh <dwalsh@redhat.com> 1.33.6-5
changelog:
  - Update po files
  - Fix newrole to open stdout and stderr rdrw so more will work on MLS machines
  Resolves: #216920


author: Dan Walsh <dwalsh@redhat.com> 1.33.6-6
changelog:
  - Fix audit2allow generating reference policy
  - Fix semanage to manage user roles properly
  Resolves: #220071


author: Dan Walsh <dwalsh@redhat.com> 1.33.6-7
changelog:
  - add exists switch to semanage to tell it not to check for existance of Linux user
  Resolves: #219421


author: Dan Walsh <dwalsh@redhat.com> 1.33.6-9
changelog:
  - Fix fixfiles script to use tty command correctly.  If this command fails, it
  should set the LOGFILE to /dev/null
  Resolves: #220879


author: Dan Walsh <dwalsh@redhat.com> 1.33.8-1
changelog:
  - Update to upstream
  	* Merged patches from Dan Walsh to:
  	  - omit the optional name from audit2allow
  	  - use the installed python version in the Makefiles
  	  - re-open the tty with O_RDWR in newrole


author: Dan Walsh <dwalsh@redhat.com> 1.33.10-1
changelog:
  - Update to upstream
  	* Merged patch to correctly handle a failure during semanage handle
  	  creation from Karl MacMillan.
  	* Merged patch to fix seobject role modification from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.33.11-1
changelog:
  - Update to upstream
  	* Merged fixfiles and seobject fixes from Dan Walsh.
  	* Merged semodule support for list of modules after -i from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> 1.33.12-1
changelog:
  - Want to update to match api
  - Update to upstream
  	* Merged newrole securetty check from Dan Walsh.
  	* Merged semodule patch to generalize list support from Karl MacMillan.
  Resolves: #200110


author: Dan Walsh <dwalsh@redhat.com> 1.33.14-1
changelog:
  * Merged newrole man page patch from Michael Thompson.
  	* Merged patch to fix python unicode problem from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.33.15-1
changelog:
  - Update to upstream
  	* Merged unicode-to-string fix for seobject audit from Dan Walsh.
  	* Merged man page updates to make "apropos selinux" work from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 1.34.1-1
changelog:
  - Fix system-config-selinux ports view
  - Update to upstream
  	* Fixed newrole non-pam build.
  	* Updated version for stable branch.


author: Dan Walsh <dwalsh@redhat.com> 2.0.0-1
changelog:
  - Update to upstream
  	* Merged new audit2allow from Karl MacMillan.
  	  This audit2allow depends on the new sepolgen python module.
  	  Note that you must run the sepolgen-ifgen tool to generate
  	  the data needed by audit2allow to generate refpolicy.
  	* Fixed newrole non-pam build.
  - Fix Changelog and spelling error in man page


author: Dan Walsh <dwalsh@redhat.com> 2.0.1-1
changelog:
  - Update to upstream
  	* Merged small fix to correct include of errcodes.h in semodule_deps from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.2-1
changelog:
  - Update to upstream
  	* Merged seobject exception handler fix from Caleb Case.
  	* Merged setfiles memory leak patch from Todd Miller.


author: Dan Walsh <dwalsh@redhat.com> 2.0.3-1
changelog:
  - Update to upstream
  	* Merged translations update from Dan Walsh.
  	* Merged chcat fixes from Dan Walsh.
  	* Merged man page fixes from Dan Walsh.
  	* Merged seobject prefix validity checking from Dan Walsh.
  	* Merged Makefile and refparser.py patch from Dan Walsh.
  	  Fixes PYTHONLIBDIR definition and error handling on interface files.


author: Dan Walsh <dwalsh@redhat.com> 2.0.6-1
changelog:
  - Update to upstream
    - policycoreutils
  	* Merged newrole O_NONBLOCK fix from Linda Knippers.
  	* Merged sepolgen and audit2allow patches to leave generated files
  	  in the current directory from Karl MacMillan.
  	* Merged restorecond memory leak fix from Steve Grubb.
    -sepolgen
  	* Merged patch to leave generated files (e.g. local.te) in current directory from Karl MacMillan.
  	* Merged patch to make run-tests.py use unittest.main from Karl MacMillan.
  	* Merged patch to update PLY from Karl MacMillan.
  	* Merged patch to update the sepolgen parser to handle the latest reference policy from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> 2.0.6-3
changelog:
  - Update to upstream
    -sepolgen
  	* Merged support for enabling parser debugging from Karl MacMillan.
  - Add sgrupp cleanup of restorcon init script


author: Dan Walsh <dwalsh@redhat.com> 2.0.7-1
changelog:
  - Update to upstream
  	* Merged restorecond init script LSB compliance patch from Steve Grubb.
    -sepolgen
  	* Merged better matching for refpolicy style from Karl MacMillan
  	* Merged support for extracting interface paramaters from interface calls from Karl MacMillan
  	* Merged support for parsing USER_AVC audit messages from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> 2.0.7-5
changelog:
  - Change location of audit2allow and sepol-ifgen to sbin
  - Updated version of sepolgen
  	* Merged patch to move the sepolgen runtime data from /usr/share to /var/lib to facilitate a read-only /usr from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> 2.0.7-6
changelog:
  - Updated version of sepolgen
  	* Merged patch to discard self from types when generating requires from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> 2.0.7-8
changelog:
  - system-config-selinux should be able to run on a disabled system,
  - at least enough to get it enabled.


author: Dan Walsh <dwalsh@redhat.com> 2.0.8-1
changelog:
  - Updated version of sepolgen
  	* Merged updates to sepolgen-ifgen from Karl MacMillan.
  	* Merged updates to sepolgen parser and tools from Karl MacMillan.
  	  This includes improved debugging support, handling of interface
  	  calls with list parameters, support for role transition rules,
  	  updated range transition rule support, and looser matching.


author: Dan Walsh <dwalsh@redhat.com> 2.0.9-1
changelog:
  - Updated version of sepolgen
  	* Merged seobject setransRecords patch to return the first alias from Xavier Toth.


author: Dan Walsh <dwalsh@redhat.com> 2.0.10-1
changelog:
  - Updated version of policycoreutils
  	* Merged chcat, fixfiles, genhomedircon, restorecond, and restorecon patches from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.13-1
changelog:
  - Updated version of policycoreutils
  	* Merged setsebool patch to only use libsemanage for persistent boolean changes from Stephen Smalley.
  	* Merged genhomedircon patch to use the __default__ setting from Dan Walsh.
  	* Dropped -b option from load_policy in preparation for always preserving booleans across reloads in the kernel.


author: Dan Walsh <dwalsh@redhat.com> 2.0.15-1
changelog:
  - Updated version of policycoreutils
  	* Merged po file updates from Dan Walsh.
  - Fix semanage to be able to modify prefix in user record


author: Dan Walsh <dwalsh@redhat.com> 2.0.16-1
changelog:
  - Updated version of policycoreutils
  	* Merged support for modifying the prefix via semanage from Dan Walsh.
  - Fixed genhomedircon to find homedirs correctly.


author: Dan Walsh <dwalsh@redhat.com> 2.0.20-1
changelog:
  - Update to match NSA
  	* Merged genhomedircon fixes from Dan Walsh.
  	* Merged setfiles -c usage fix from Dan Walsh.
  	* Merged restorecon fix from Yuichi Nakamura.
  	* Dropped -lsepol where no longer needed.


author: Dan Walsh <dwalsh@redhat.com> 2.0.22-13
changelog:
  - Speed up genhomedircon by an order of magnitude by compiling regex
  - Allow semanage fcontext -a -t <<none>> /path to work


author: Dan Walsh <dwalsh@redhat.com> 2.0.25-1
changelog:
  - Update semodule man page
  	* Fix genhomedircon searching for USER from Todd Miller
  	* Install run_init with mode 0755 from Dan Walsh.
  	* Fix chcat from Dan Walsh.
  	* Fix fixfiles pattern expansion and error reporting from Dan Walsh.
  	* Optimize genhomedircon to compile regexes once from Dan Walsh.
  	* Fix semanage gettext call from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.25-13
changelog:
  - Upgrade version of sepolgen from NSA
  	* Expand the sepolgen parser to parse all current refpolicy modules from Karl MacMillan.
  	* Suppress generation of rules for non-denials from Karl MacMillan (take 3).


author: Dan Walsh <dwalsh@redhat.com> 2.0.28-1
changelog:
  - Update to upstream
  	* Update semodule man page for -D from Dan Walsh.
  	* Add boolean, locallist, deleteall, and store support to semanage from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.29-1
changelog:
  - Update to upstream
  	* Add genhomedircon script to invoke semodule -Bn from Dan Walsh.
  - Add deleteall for ports and fcontext


author: Dan Walsh <dwalsh@redhat.com> 2.0.31-1
changelog:
  - Remove no.po
  - Update to upstream
  	* Fix semodule option handling from Dan Walsh.
  	* Add deleteall support for ports and fcontexts in semanage from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.33-1
changelog:
  - Upgrade from NSA
  	* Drop verbose output on fixfiles -C from Dan Walsh.
  	* Fix argument handling in fixfiles from Dan Walsh.
  	* Enhance boolean support in semanage, including using the .xml description when available, from Dan Walsh.
  - Fix handling of final screen in polgengui


author: Dan Walsh <dwalsh@redhat.com> 2.0.33-4
changelog:
  - Fix sepolgen to be able to parse Fedora 9 policy
        Handle ifelse statements
        Handle refpolicywarn inside of define
        Add init.if and inetd.if into parse
        Add parse_file to syntax error message


author: Dan Walsh <dwalsh@redhat.com> 2.0.34-1
changelog:
  - Update to upstream
  	* Update Makefile to not build restorecond if
  	  /usr/include/sys/inotify.h is not present


author: Dan Walsh <dwalsh@redhat.com> 2.0.34-2
changelog:
  - Make sepolgen set error exit code when partial failure
  - audit2why now checks booleans for avc diagnosis


author: Dan Walsh <dwalsh@redhat.com> 2.0.35-1
changelog:
  - Update to upstream
  	* Merged support for non-interactive newrole command invocation from Tim Reed.


author: Dan Walsh <dwalsh@redhat.com> 2.0.36-1
changelog:
  - Update to upstream
  	* Merged update to chcat, fixfiles, and semanage scripts from Dan Walsh.
  	* Merged sepolgen fixes from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.38-1
changelog:
  - Update to upstream
    * Merged audit2allow cleanups and boolean descriptions from Dan Walsh.
    * Merged setfiles -0 support by Benny Amorsen via Dan Walsh.
    * Merged fixfiles fixes and support for ext4 and gfs2 from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.39-1
changelog:
  - Don't initialize audit2allow for audit2why call.  Use default
  - Update to upstream
  	* Merged fixfiles -C fix from Marshall Miller.


author: Dan Walsh <dwalsh@redhat.com> 2.0.41-1
changelog:
  - Update to upstream
  	* Merged audit2why fix and semanage boolean --on/--off/-1/-0 support from Dan Walsh.
  	* Merged a second fixfiles -C fix from Marshall Miller.


author: Dan Walsh <dwalsh@redhat.com> 2.0.42-1
changelog:
  - Update to upstream
  	* Make semodule_expand use sepol_set_expand_consume_base to reduce
  	  peak memory usage.


author: Dan Walsh <dwalsh@redhat.com> 2.0.43-1
changelog:
  - Update to upstream
  	* Merged fix fixfiles option processing from Vaclav Ovsik.
  - Added existing users, staff and user_t users to polgengui


author: Dan Walsh <dwalsh@redhat.com> 2.0.46-1
changelog:
  - Update to upstream
  	* Update audit2allow to report dontaudit cases from Dan Walsh.
  	* Fix semanage port to use --proto from Caleb Case.


author: Dan Walsh <dwalsh@redhat.com> 2.0.47-1
changelog:
  - Make restorecond not start by default
  - Fix polgengui to allow defining of confined roles.
  - Add patches from Lubomir Rintel <lkundrak@v3.sk>
    * Add necessary runtime dependencies on setools-console for -gui
    * separate stderr when run seinfo commands
  - Update to upstream
    * Update semanage man page for booleans from Dan Walsh.
    * Add further error checking to seobject.py for setting booleans.


author: Dan Walsh <dwalsh@redhat.com> 2.0.47-2
changelog:
  - Add rm -rf /tmp/gconfd-* /tmp/pulse-* /tmp/orbit-* to fixfiles restore
  - So that mislabeled files will get removed on full relabel


author: Dan Walsh <dwalsh@redhat.com> 2.0.49-1
changelog:
  - Update to upstream
  	* Remove security_check_context calls for prefix validation from semanage.
  	* Change setfiles and restorecon to not relabel if the file already has the correct context value even if -F/force is specified.


author: Dan Walsh <dwalsh@redhat.com> 2.0.52-2
changelog:
  - Add lockdown wizard
  - Allow semanage booleans to take an input file an process lots of booleans at once.


author: Dan Walsh <dwalsh@redhat.com> 2.0.53-1
changelog:
  - Update to upstream
  	* Change setfiles to validate all file_contexts files when using -c from Stephen Smalley.


author: Dan Walsh <dwalsh@redhat.com> 2.0.54-1
changelog:
  - Update to upstream
  	* Add support for boolean files and group support for seusers from Dan Walsh.
  	* Ensure that setfiles -p output is newline terminated from Russell Coker.


author: Dan Walsh <dwalsh@redhat.com> 2.0.56-1
changelog:
  - Fix semanage help display
  - Update to upstream
  	* fixfiles will now remove all files in /tmp and will check for
  	  unlabeled_t in /tmp and /var/tmp from Dan Walsh.
  	* add glob support to restorecond from Dan Walsh.
  	* allow semanage to handle multi-line commands in a single transaction
  	  from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.58-1
changelog:
  - Update to upstream
  	* Allow local file context entries to override policy entries in
  	semanage from Dan Walsh.
  	* Newrole error message corrections from Dan Walsh.
  	* Add exception to audit2why call in audit2allow from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.61-1
changelog:
  - Update to upstream
  	* chcat: cut categories at arbitrary point (25) from Dan Walsh
  	* semodule: use new interfaces in libsemanage for compressed files
  	  from Dan Walsh
  	* audit2allow: string changes for usage


author: Dan Walsh <dwalsh@redhat.com> 2.0.61-3
changelog:
  - Add Domains Page to system-config-selinux
  - Add ability to create dbus confined applications to polgen


author: Dan Walsh <dwalsh@redhat.com> 2.0.62-1
changelog:
  - Update to upstream
  	* Add btrfs to fixfiles from Dan Walsh.
  	* Remove restorecond error for matching globs with multiple hard links
  	and fix some error messages from Dan Walsh.
  	* Make removing a non-existant module a warning rather than an error
  	  from Dan Walsh.
  	* Man page fixes from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.63-1
changelog:
  - Update to upstream
  	* Fix transaction checking from Dan Walsh.
  	* Make fixfiles -R (for rpm) recursive.
  	* Make semanage permissive clean up after itself from Dan Walsh.
  	* add /root/.ssh/* to restorecond.conf


author: Dan Walsh <dwalsh@redhat.com> 2.0.64-1
changelog:
  - Update to upstream
  	* Keep setfiles from spamming console from Dan Walsh.
  	* Fix chcat's category expansion for users from Dan Walsh.
  - Update po files
  - Fix sepolgen


author: Dan Walsh <dwalsh@redhat.com> 2.0.68-1
changelog:
  - Fix location of man pages
  - Update to upstream
  	* Modify setfiles to exclude mounts without seclabel option in
  	/proc/mounts on kernels >= 2.6.30 from Thomas Liu.
  	* Re-enable disable_dontaudit rules upon semodule -B from Christopher
  	Pardy and Dan Walsh.
  	* setfiles converted to fts from Thomas Liu.


author: Dan Walsh <dwalsh@redhat.com> 2.0.70-1
changelog:
  - Update to upstream
  	* Modify restorecon to only call realpath() on user-supplied pathnames
  	from Stephen Smalley.
  	* Fix typo in fixfiles that prevented it from relabeling btrfs
  	  filesystems from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.71-1
changelog:
  - Fix chcat to report error on non existing file
  - Update to upstream
  	* Modify setfiles/restorecon checking of exclude paths.  Only check
  	user-supplied exclude paths (not automatically generated ones based on
  	lack of seclabel support), don't require them to be directories, and
  	ignore permission denied errors on them (it is ok to exclude a path to
  	which the caller lacks permission).


author: Ville Skyttä <ville.skytta@iki.fi> - 2.0.71-9
changelog:
  - Don't try to remove restorecond after last erase (done already in %preun).
  - Ensure scriptlets exit with status 0.
  - Fix %post and %pr


author: Dan Walsh <dwalsh@redhat.com> 2.0.73-1
changelog:
  - Update to upstream
  	* Add semanage dontaudit to turn off dontaudits from Dan Walsh.
  	* Fix semanage to set correct mode for setrans file from Dan Walsh.
  	* Fix malformed dictionary in portRecord from Dan Walsh.
  	* Restore symlink handling support to restorecon based on a patch by
  	Martin Orr.  This fixes the restorecon /dev/stdin performed by Debian
  	udev scripts that was broken by policycoreutils 2.0.70.


author: Dan Walsh <dwalsh@redhat.com> 2.0.74-1
changelog:
  - Update to upstream
  	* Change semodule upgrade behavior to install even if the module
  	  is not present from Dan Walsh.
  	* Make setfiles label if selinux is disabled and a seclabel aware
  	  kernel is running from Caleb Case.
  	* Clarify forkpty() error message in run_init from Manoj Srivastava.


author: Dan Walsh <dwalsh@redhat.com> 2.0.74-8
changelog:
  - Add check to sandbox to verify save changes - Chris Pardy
  - Fix memory leak in restorecond - Steve Grubb


author: Dan Walsh <dwalsh@redhat.com> 2.0.74-14
changelog:
  - Allow semanage -i and semanage -o to generate customization files.
  - semanage -o will generate a customization file that semanage -i can read and set a machines to the same selinux configuration


author: Dan Walsh <dwalsh@redhat.com> 2.0.76-1
changelog:
  - Update to upstream
  	* Remove setrans management from semanage, as it does not work
  	  from Dan Walsh.
  	* Move load_policy from /usr/sbin to /sbin from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.77-1
changelog:
  - Update to upstream
  	* Fixed bug preventing semanage node -a from working
  	  from Chad Sellers
  	* Fixed bug preventing semanage fcontext -l from working
  	  from Chad Sellers
  - Change semanage to use unicode


author: Dan Walsh <dwalsh@redhat.com> 2.0.78-1
changelog:
  - Update to upstream
  	* Remove non-working OUTFILE from fixfiles from Dan Walsh.
  	* Additional exception handling in chcat from Dan Walsh.

  	* fix sepolgen to read a "type 1403" msg as a policy load by Stephen
  	  Smalley <sds@tycho.nsa.gov>
  	* Add support for Xen ocontexts from Paul Nuzzi.


author: Dan Walsh <dwalsh@redhat.com> 2.0.78-14
changelog:
  - Add session capability to sandbox
  - sandbox -SX -H ~/.homedir -t unconfined_t -l s0:c15 /etc/gdm/Xsession


author: Dan Walsh <dwalsh@redhat.com> 2.0.81-4
changelog:
  - Update to upstream - sepolgen
  	* Add since-last-boot option to audit2allow from Dan Walsh.
  	* Fix sepolgen output to match what Chris expects for upstream
  	  refpolicy from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> 2.0.82-7
changelog:
  - Fix crash when args are empty
  Resolves: #582542
  - Fix semange to exit on bad options
  - Fix semanage dontaudit man page section
  Resolves: #582533


author: Dan Walsh <dwalsh@redhat.com> 2.0.82-13
changelog:
  - Make semanage boolean work on disabled machines and during livecd xguest
  - Fix homedir and tmpdir handling in sandbox
  Resolves: #587263


author: Dan Walsh <dwalsh@redhat.com> 2.0.82-17
changelog:
  - Fix policy tool to have correct name in menus
  - Fix seunshare to handle /tmp being in ~/home
  - Fix saving of altered files
  - Update translations


author: Dan Walsh <dwalsh@redhat.com> 2.0.82-23
changelog:
  - Fix seunshare translations
  - Fix seunshare to work on all arches
  - Fix icon for system-config-selinux
  Resolves: #595276


author: Dan Walsh <dwalsh@redhat.com> 2.0.82-27
changelog:
  - Move genhomedircon.8 to same package as genhomedircon
  - Fix sandbox to pass unit test
  Resolves: #595796


author: Dan Walsh <dwalsh@redhat.com> 2.0.83-17
changelog:
  - Apply patch to restorecond from Chris Adams, which will cause restorecond
  - to watch first user that logs in.


author: Dan Walsh <dwalsh@redhat.com> 2.0.83-20
changelog:
  - Tighten down seunshare to create /tmp dir with sticky bit and MS_NODEV | MS_NOSUID | MS_NOEXEC;
  - Remove setsid on seunshare so ^c on sandbox will cause apps to exit
  - Add dbus-launch --exit-with-session so all processes launched within the sandbox exit with the sandbox
  - Clean up error handling so error will get sent back to sandbox tool


author: Dan Walsh <dwalsh@redhat.com> 2.0.83-32
changelog:
  - Remove setuid flag and replace with file capabilities
  - Fix sandbox handling of files with spaces in them


author: Dan Walsh <dwalsh@redhat.com> 2.0.83-33
changelog:
  - Move /etc/pam.d/newrole in to polcicycoreutils-newrole
  - Additional capability checking in sepolgen


author: Dan Walsh <dwalsh@redhat.com> 2.0.85-3
changelog:
  - Polgengui raises the wrong type of exception.  #471078
  - Change semanage to not allow it to semanage module -D
  - Change setsebool to suggest run as root on failure


author: Dan Walsh <dwalsh@redhat.com> 2.0.85-10
changelog:
  - Cleaup selinux-polgengui to be a little more modern, fix comments and use selected name
  - Cleanup chcat man page


author: Dan Walsh <dwalsh@redhat.com> 2.0.85-13
changelog:
  - Rewrite seunshare to make sure /tmp is mounted stickybit owned by root
  - Only allow names in polgengui that contain letters and numbers
  - Fix up node handling in semanage command
  - Update translations


author: Dan Walsh <dwalsh@redhat.com> 2.0.85-16
changelog:
  - Require python-IPy for policycoreutils-python package
  - Fixes for sepologen
    - Usage statement needs -n name
    - Names with _ are being prevented
    - dbus apps should get _chat interface


author: Dan Walsh <dwalsh@redhat.com> 2.0.85-18
changelog:
  - put back in old handling of -T in sandbox command
  - Put back setsid in seunshare
  - Fix rsync to maintain times


author: Dan Walsh <dwalsh@redhat.com> 2.0.85-20
changelog:
  - Change sepolgen-ifgen to search all available policy files
  - Exit in restorecond if it can not find a UID in the passwd database


author: Dan Walsh <dwalsh@redhat.com> 2.0.85-21
changelog:
  - change default location of HOMEDIR in sandbox to /tmp/.sandbox_home_*
  - This will allow default sandboxes to work on NFS homedirs without allowing
    access to homedir data


author: Dan Walsh <dwalsh@redhat.com> 2.0.85-23
changelog:
  - Fix sepolgen to generate network polcy using generic_if and genric_node versus all_if and all_node


author: Dan Walsh <dwalsh@redhat.com> 2.0.86-6
changelog:
  - Apply patches from Christoph A.
    * fix sandbox title
    * stop xephyr from li
  - Also ignore errors on sandbox include of directory missing files


author: Dan Walsh <dwalsh@redhat.com> 2.0.86-10
changelog:
  - Allow semodule to pick alternate root for selinux files
  - Add ~/.config/* to restorcond_user.conf, so restorecond will watch for mislabeled files in this directory.


author: Dan Walsh <dwalsh@redhat.com> 2.0.86-16
changelog:
  - Add -C option to sandbox and seunshare to maintain capabilities, otherwise
  the bounding set will be dropped.
  - Change --cgroups short name -c rather then -C for consistancy
  - Fix memory and fd leaks in seunshare


author: Dan Walsh <dwalsh@redhat.com> 2.0.86-17
changelog:
  - Add -k qualifier to seunshare to have it attempt to kill all processes with
  the matching MCS label.


author: Dan Walsh <dwalsh@redhat.com> 2.0.86-18
changelog:
  - Change seunshare to send kill signals to the childs session.
  - Also add signal handler to catch sigint, so if user enters ctrl-C sandbox will shutdown.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.4-1
changelog:
  -Update to upstream
  2.1.4 2011-08-17
  	* run_init: clarification of the usage in the
  	* semanage: fix usage header around booleans
  	* semanage: remove useless empty lines
  	* semanage: update man page with new examples
  	* semanage: update usage text
  	* semanage: introduce file context equivalencies
  	* semanage: enable and disable modules
  	* semanage: output all local modifications
  	* semanage: introduce extraction of local configuration
  	* semanage: cleanup error on invalid operation
  	* semanage: handle being called with no arguments
  	* semanage: return sooner to save CPU time
  	* semanage: surround getopt with try/except
  	* semanage: use define/raise instead of lots of
  	* semanage: some options are only valid for
  	* semanage: introduce better deleteall support
  	* semanage: do not allow spaces in file
  	* semanage: distinguish between builtin and local permissive
  	* semanage: centralized ip node handling
  	* setfiles: make the restore function exclude() non-static
  	* setfiles: use glob to handle ~ and
  	* fixfiles: do not hard code types
  	* fixfiles: stop trying to be smart about
  	* fixfiles: use new kernel seclabel option
  	* fixfiles: pipe everything to cat before sending
  	* fixfiles: introduce /etc/selinux/fixfiles_exclude_dirs
  	* semodule: support for alternative root paths

  2.1.3 2011-08-03
  	* semanage: fix indention
  	* semodule_package: fix man page typo
  	* semodule_expand: update man page with -a
  	* semanage: handle os errors
  	* semanage: fix traceback with bad options
  	* semanage: show usage on -h or --help
  	* semanage: introduce more deleteall options
  	* semanage: verify ports < 65536
  	* transaction into semanageRecords
  	* make get_handle a method of semanageRecords
  	* remove a needless blank line
  	* make process_one error if not initialized correctly
  	* fixfiles: correct usage for r_opts.rootpath
  	* put -p in help for restorecon and
  	* fixfiles: do not try to only label
  	* fixfiles clean up /var/run and /var/lib/debug
  	* fixfiles delete tmp sockets and pipes rather
  	* fixfile use find -delete instead of pipe
  	* chcat man page typo
  	* add man page for genhomedircon
  	* setfiles fix typo
  	* setsebool should inform users they need to
  	* setsebool typos
  	* open_init_tty man page typos
  	* Don't add user site directory to sys.path
  	* newrole retain CAP_SETPCAP

  2.1.2 2011-08-02
  	* seunshare: define _GNU_SOURCE earlier
  	* make ignore_enoent do something
  	* restorecond: first user logged in is not noticed
  	* Repo: update .gitignore

  2.1.1 2011-08-01
  	* Man page updates
  	* restorecon fix for bad inotify assumptions

  2.1.0 2011-07-27
  	* Release, minor version bump


author: Dan Walsh <dwalsh@redhat.com> - 2.1.5-1
changelog:
  -Update to upstream
     * policycoreutils
  	* setfiles: Fix process_glob to handle error situations
  	* sandbox: Allow seunshare to run as root
  	* sandbox: trap sigterm to make sure sandbox
  	* sandbox: pass DPI from the desktop
  	* sandbox: seunshare: introduce helper spawn_command
  	* sandbox: seunshare: introduce new filesystem helpers
  	* sandbox: add -C option to not drop
  	* sandbox: split seunshare caps dropping
  	* sandbox: use dbus-launch
  	* sandbox: numerous simple updates to sandbox
  	* sandbox: do not require selinux context
  	* sandbox: Makefile: new man pages
  	* sandbox: rename dir to srcdir
  	* sandbox: allow users specify sandbox window size
  	* sandbox: check for paths up front
  	* sandbox: use defined values for paths rather
  	* sandbox: move seunshare globals to the top
  	* sandbox: whitespace fix
  	* semodule_package: Add semodule_unpackage executable
  	* setfiles: get rid of some stupid globals
  	* setfiles: move exclude_non_seclabel_mounts to a generic location
     * sepolgen
  	* refparser: include open among valid permissions
  	* refparser: add support for filename_trans rules


author: Dan Walsh <dwalsh@redhat.com> - 2.1.5-4
changelog:
  - Maintain the LANG environment Variable into the sandbox
  - Change restorecon/setfiles to only change type part of the context unless
    -f qualifier is given


author: Dan Walsh <dwalsh@redhat.com> - 2.1.6-1
changelog:
  -Update to upstream
      policycoreutils-2.1.6
  	* sepolgen-ifgen: new attr-helper does something
  	* audit2allow: use alternate policy file
  	* audit2allow: sepolgen-ifgen use the attr helper
  	* setfiles: switch from stat to stat64
  	* setfiles: Fix potential crash using dereferenced ftsent
  	* setfiles: do not wrap * output at 80 characters
  	* sandbox: add -Wall and -Werror to makefile
  	* sandbox: add sandbox cgroup support
  	* sandbox: rewrite /tmp handling
  	* sandbox: do not bind mount so much
  	* sandbox: add level based kill option
  	* sandbox: cntrl-c should kill entire process control group
  	* Create a new preserve_tunables flag in sepol_handle_t.
  	* semanage: show running and disk setting for booleans
  	* semanage: Dont print heading if no items selected
  	* sepolgen: audit2allow is mistakakenly not allowing valid module names
  	* semanage: Catch RuntimeErrors, that can be generated when SELinux is disabled
  	* More files to ignore
  	* tree: default make target to all not install
  	* sandbox: do not load unused generic init functions
      sepolgen-1.1.2
  	* src: sepolgen: add attribute storing infrastructure
  	* Change perm-map and add open to try to get better results on
  	* look for booleans that might solve problems
  	* sepolgen: audit2allow is mistakakenly not allowing valid module names
  	* tree: default make target to all not install


author: Dan Walsh <dwalsh@redhat.com> - 2.1.7-5
changelog:
  - A couple of minor coverity fixes for a potential leaked file descriptor
  - An an unchecked return code.
  - Add ~/.local/share/* to restorecond_user watches


author: Dan Walsh <dwalsh@redhat.com> - 2.1.8-1
changelog:
  - Upgrade to policycoreutils upstream
  	* sandbox: Maintain the LANG environment into the sandbox
  	* audit2allow: use audit2why internally
  	* fixfiles: label /root but not /var/lib/BackupPC
  	* semanage: update local boolean settings is dealing with localstore
  	* semanage: missing modify=True
  	* semanage: set modified correctly
  	* restorecond: make restorecond dbuss-able
  	* restorecon: Always check return code on asprintf
  	* restorecond: make restorecond -u exit when terminal closes
  	* sandbox: introduce package name and language stuff
  	* semodule_package: remove semodule_unpackage on clean
  	* fix sandbox Makefile to support DESTDIR
  	* semanage: Add -o description to the semanage man page
  	* make use of the new realpath_not_final function
  	* setfiles: close /proc/mounts file when finished
  	* semodule: Document semodule -p in man page
  	* setfiles: fix use before initialized
  	* restorecond: Add .local/share as a directory to watch
  - Upgrade to sepolgen upstream
  	* Ignore permissive qualifier if found in an interface
  	* Return name field in avc data


author: Dan Walsh <dwalsh@redhat.com> - 2.1.8-4
changelog:
  - sandbox init script should always return 0
  - sandbox command needs to check range of categories and report error if not big enough


author: Dan Walsh <dwalsh@redhat.com> - 2.1.8-6
changelog:
  - Add listing of distribution equivalence class from semanage fcontext -l
  - Add checking to semanage fcontext -a to guarantee a file specification will not be masked by an equivalence


author: Dan Walsh <dwalsh@redhat.com> - 2.1.8-7
changelog:
  - Fix dpi handling in sandbox
  - Make sure semanage fcontext -l -C prints if only local equiv have changed


author: Dan Walsh <dwalsh@redhat.com> - 2.1.9-1
changelog:
  - Upgrade to upstream
  	* sandbox: move sandbox.conf.5 to just sandbox.5
  	* po: Makefile use -p to preserve times to allow multilib simultatious installs
  	* of po files
  	* sandbox: Allow user to specify the DPI value for X in a sandbox
  	* sandbox: make sure the domain launching sandbox has at least 100 categories
  	* sandbox: do not try forever to find available category set
  	* sandbox: only complain if sandbox unable to launch
  	* sandbox: init script run twice is still successful
  	* semanage: print local and dristo equiv rules
  	* semanage: check file equivalence rules for conflict
  	* semanage: Make sure semanage fcontext -l -C prints even if local keys
  	* are not defined
  	* semanage: change src,dst to target,substitute for equivalency
  	* sestatus: Updated sestatus and man pages.
  	* Added SELinux config file man page.
  	* add clean target to man Makefile


author: Dan Walsh <dwalsh@redhat.com> - 2.1.10-1
changelog:
  -Update to upstream
  - sepolgen
  	* better analysis of why things broke
  - policycoreutils
  	* Remove excess whitespace
  	* sandbox: Add back in . functions to sandbox.init script
  	* Fix Makefile to match other policycoreutils Makefiles
  	* semanage: drop unused translation getopt


author: Dan Walsh <dwalsh@redhat.com> - 2.1.10-4
changelog:
  - Fix the handling of namespaces in seunshare/sandbox.
  - Currently mounting of directories within sandbox is propogating to the
  - parent namesspace.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.10-11
changelog:
  - restorecond fixes:
    Stop using depracated g_io interfaces
    Exit with non zero exit code if wrong options given
    Add -h option


author: Dan Walsh <dwalsh@redhat.com> - 2.1.10-17
changelog:
  - Change semanage to produce proper audit records for Common Criteria
  - Cleanup packaging for usrmove


author: Dan Walsh <dwalsh@redhat.com> - 2.1.10-22
changelog:
  - Change to use new selinux_binary_policy_path()
  - Add systemd_passwd_agent_exec($1), and systemd_read_fifo_file_passwd_run($1) to templates for _admin interface


author: Dan Walsh <dwalsh@redhat.com> - 2.1.11-1
changelog:
  - Update to upstream
    - policycoreutils
  	* sandbox: do not propogate inside mounts outside
  	* sandbox: Removing sandbox init script, should no longer be necessary
  	* restorecond: Stop using deprecated interfaces for g_io
  	* semanage: proper auditting of user changes for LSPP
  	* semanage: audit message to show what record(s) and item(s) have chaged
  	* scripts: Update Makefiles to handle /usrmove
  	* mcstrans: Version should have been bumped on last check in
  	* seunshare: Only drop caps not the Bounding Set from seunshare
  	* Add bash-completion scripts for setsebool and semanage
  	* newrole: Use correct capng calls in newrole
  	* Fix infinite loop with inotify on 2.6.31 kernels
  	* fix ftbfs with hardening flags
  	* Only run setfiles if we found read-write filesystems to run it on
  	* update .po files
  	* remove empty po files
  	* do not fail to install if unable to make load_policy lnk file

     - sepolgen
  	* Fix dead links to www.nsa.gov/selinux
  	* audit.py Dont crash if empty data is passed to sepolgen
  	* do not use md5 when calculating hash signatures
  	* fix detection of policy loads


author: Dan Walsh <dwalsh@redhat.com> - 2.1.11-6
changelog:
  - Rebuild to get latest libsepol which fixes the file_name transition problems
  - Update translations
  - Fix calls to close fd for restorecond


author: Dan Walsh <dwalsh@redhat.com> - 2.1.11-12
changelog:
  - Add -N qualifier to semanage, setsebool and semodule to allow you to update
  - policy without reloading it into the kernel.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.11-15
changelog:
  - Allow stream sock_files to be stored in /tmp and etc_rw_t directories by sepolgen
  - Trigger on selinux-policy needs to change to selinux-policy-devel
  - Update translations
  - Fix semanage dontaudit off/on exception


author: Dan Walsh <dwalsh@redhat.com> - 2.1.11-1
changelog:
  - Update to upstream
    - policycoreutils
  	* restorecond: wrong options should exit with non-zero error code
  	* restorecond: Add -h option to get usage command
  	* resorecond: user: fix fd leak
  	* mcstrans: add -f to run in foreground
  	* semanage: fix man page range and level defaults
  	* semanage: bash completion for modules should include -a,-m, -d
  	* semanage: manpage update for -e
  	* semanage: dontaudit off should work
  	* semanage: locallist option does not take an argument
  	* sepolgen: Make use of setools optional within sepolgen
     - sepolgen
  	* Make use of setools optional within sepolgen
  	* We need to support files that have a + in them


author: Dan Walsh <dwalsh@redhat.com> - 2.1.11-4
changelog:
  - Fix restorecon to generate a better percentage of completion on restorecon -R /.
  - Have audit2allow look at the constaint violation and tell the user whether it
  - is because of user,role or level


author: Dan Walsh <dwalsh@redhat.com> - 2.1.11-6
changelog:
  - Change polgen to generate dbus apps as optional so they can compile on minimal policy system, patch from Miroslav Grepl


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-1
changelog:
  - Update to upstream
  	* genhomedircon: manual page improvements
  	* setfiles/restorecon minor improvements
  	* run_init: If open_init_pty is not available then just use exec
  	* newrole: do not drop capabilities when newrole is run as
  	* restorecon: only update type by default
  	* scripts: Don't syslog setfiles changes on a fixfiles restore
  	* setfiles: do not syslog if no changes
  	* Disable user restorecond by default
  	* Make restorecon return 0 when a file has changed context
  	* setfiles: Fix process_glob error handling
  	* semanage: allow enable/disable under -m
  	* add .tx to gitignore
  	* translations: commit translations from Fedora community
  	* po: silence build process
  	* gui: Checking in policy to support polgengui and sepolgen.
  	* gui: polgen: search for systemd subpackage when generating policy
  	* gui: for exploring booleans
  	* gui: system-config-selinux gui
  	* Add Makefiles to support new gui code
  	* gui: remove lockdown wizard
  	* return equivalency records in fcontext customized
  	* semanage: option to not load new policy into kernel after
  	* sandbox: manpage update to describe standard types
  	* setsebool: -N should not reload policy on changes
  	* semodule: Add -N qualifier to no reload kernel policy
  	* gui: polgen: sort selinux types of user controls
  	* gui: polgen: follow symlinks and get the real path to
  	* gui: Fix missing error function
  	* setfiles: return errors when bad paths are given
  	* fixfiles: tell restorecon to ignore missing paths
  	* setsebool: error when setting multiple options
  	* semanage: use boolean subs.
  	* sandbox: Make sure Xephyr never listens on tcp ports
  	* sepolgen: return and output constraint violation information
  	* semanage: skip comments while reading external configuration files
  	* restorecond: relabel all mount runtime files in the restorecond example
  	* genhomedircon: dynamically create genhomedircon
  	* Allow returning of bastard matches
  	* sepolgen: return and output constraint violation information
  	* audit2allow: one role/type pair per line


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-3
changelog:
  - Allow fixfiles to specify -v, so they can get verbosity rather then progress.
  - Fix load_file Makefile to use SBINDIR rather then real OS.
  - Fix man pages in setfiles and restorecon to reflect what happens when you relabel the entire OS.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-7
changelog:
  - Fix manpage generation, missing import
  - Add equiv_dict to get samba booleans into smbd_selinux
  - Add proper translations for booleans and remove selinux.tbl


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-8
changelog:
  - Fix typo in preunstall line for restorecond
  - Add mgrepl patch to consolidate file context generated by sepolicy generate


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-9
changelog:
  - Fix semanage to verify that types are appropriate for commands.
    * Patch initiated by mgrepl
    * Fixes problem of specifying non file_types for fcontext, or not port_types for semanage port


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-10
changelog:
  - Update sepolicy generate with patch to create spec file and man page.
  - Patch initiated by Miroslav Grepl


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-12
changelog:
  - Add missing spec.py from templates directory needed for sepolicy generate
  - Add /var/tmp as collection point for sandbox apps.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-14
changelog:
  - Add role_allow to sepolicy.search python bindings, this allows us to remove last requirement for setools-cmdline in gui tools.
  - Fix man page generator.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-16
changelog:
  - Add Miroslav Grepl patch to generate html man pages
  - Update Translations
  - Add option to sandbox to shred files before deleting


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-19
changelog:
  - Change sepolicy python bindings to have python pick policy file, fixes weird memory problems in sepolicy network


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-24
changelog:
  - Fix manpage to generate proper man pages for alternate policy,
  basically allow me to build RHEL6 man pages on a Fedora 18 box, as long as
  I pull the policy, policy.xml and file_contexts and file_contexts.homedir


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-25
changelog:
  - Remove run_init, no longer needed with systemd.
  - Fix sepolicy generate to not include subdirs in generated fcontext file.  (mgrepl patch)


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-26
changelog:
  - Fix semanage booleans -l, move more boolean_dict handling into sepolicy
  - Update translations
  - Fixup sepolicy generate to discover /var/log, /var/run and /var/lib directories if they match the name
  - Fix kill function call should indicate signal_perms not kill capability
  - Error out cleanly in system-config-selinux, if it can not contact XServer


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-27
changelog:
  - Only report restorecon warning for missing default label, if not running
  recusively
  - Update translations


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-37
changelog:
  - Move sepogen python bindings back into policycoreutils-python out of -devel, since sepolicy is using the


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-41
changelog:
  - Add --path as a parameter to sepolicy generate
  - Print warning message if program does not exists when generating policy, and do not attempt to run nm command
  - Fix sepolicy generate -T to not take an argument, and supress the help message
  - Since this is really just a testing tool


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-44
changelog:
  - Additional fixes for disabled SELinux Box
  - system-config-selinux no longer relies on lokkit for /etc/selinux/config


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-45
changelog:
  - Apply patch from Miroslav to display proper range description in man pages g
  - Should print warning on missing default label when run in recusive mode iff
  - Remove extra -R description, and fix recursive description


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-46
changelog:
  - sepolicy transition was blowing up. Also cleanup output when only source is specified.
  - sepolicy generate should allow policy modules names that include - or _


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-50
changelog:
  - Update translations
  - update sepolicy manpage to generate fcontext equivalence data and to list
  default file context paths.
  - Add ability to generate policy for confined admins and domains like puppet.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-51
changelog:
  - Update translations
  - Fix sepolicy booleans to handle autogenerated booleans descriptions
  - Cleanups of sepolicy manpage
  - Fix crash on git_shell man page generation


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-52
changelog:
  - Update to latest patches from eparis/Upstream
  -    secon: add support for setrans color information in prompt output
  - Update translations


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-53
changelog:
  - Update with Miroslav patch to handle role attributes
  - Update Translations
  - import sepolicy will only throw exception on missing policy iff selinux is enabled


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-55
changelog:
  - Update Translations
  - Fix handling of semanage generate --cgi -n MODULE PATHTO/CGI
  -   This fixes the spec file and script file getting wrong names for modules and types.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-56
changelog:
  -  Additional changes for bash completsion and generate man page to match the w
  -  Add newtype as a new qualifier to sepolicy generate.  This new mechanism wil
  -  a policy write to generate types after the initial policy has been written a
  -  will autogenerate all of the interfaces.
  -  I also added a -w options to allow policy writers from the command line to s
  -  the writable directories of files.
  -
  -  Modify network.py to include interface definitions for newly created port type
  -  Standardize of te_types just like all of the other templates.

  -  Change permissive domains creation to raise exception if sepolgen is not ins
  -  get_te_results no longer needs or uses the opts parameter.
  -  The compliler was complaining so I just removed the option.
  -  Start returning analysis data for audit2allow


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-57
changelog:
  - Update to latest patches from eparis/Upstream
  - fixfiles onboot will write any flags handed to it to /.autorelabel.
  -   * Patch sent to initscripts to have fedora-autorelabel pass flags back to fixfiles restore
  -   * This should allow fixfiles -F onboot, to force a hard relabel.
  - Add -p to show progress on full relabel.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.12-58
changelog:
  - Reorginize sepolicy so all get_all functions are in main module
  - Add -B capability to fixfiles onboot and fixfiles restore, basically searches for all files created since the last boot.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-1
changelog:
  - Update to upstream
  	* setfiles: estimate percent progress
  	* load_policy: make link at the destination directory
  	* Rebuild polgen.glade with glade-3
  	* sepolicy: new command to unite small utilities
  	* sepolicy: Update Makefiles and po files
  	* sandbox: use sepolicy to look for sandbox_t
  	* gui: switch to use sepolicy
  	* gui: sepolgen: use sepolicy to generate
  	* semanage: use sepolicy for boolean dictionary
  	* add po file configuration information
  	* po: stop running update-po on all
  	* semanage: seobject verify policy types before allowing you to assign them.
  	* gui: Start using Popen, instead of os.spawnl
  	* sandbox: Copy /var/tmp to /tmp as they are the same inside
  	* qualifier to shred content
  	* semanage: Fix handling of boolean_sub names when using the -F flag
  	* semanage: man: roles instead of role
  	* gui: system-config-selinux: Catch no DISPLAY= error
  	* setfiles: print error if no default label found
  	* semanage: list logins file entries in semanage login -l
  	* semanage: good error message is sepolgen python module missing
  	* gui: system-config-selinux: do not use lokkit
  	* secon: add support for setrans color information in prompt output
  	* restorecond: remove /etc/mtab from default list
  	* gui: If you are not able to read enforcemode set it to False
  	* genhomedircon: regenerate genhomedircon more often
  	* restorecond: Add /etc/udpatedb.conf to restorecond.conf
  	* genhomedircon generation to allow spec file to pass in SEMODULE_PATH
  	* fixfiles: relabel only after specific date
  	* po: update translations
  	* sandbox: seunshare: do not reassign realloc value
  	* seunshare: do checking on setfsuid
  	* sestatus: rewrite to shut up coverity


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-4
changelog:
  - Revert some changes which are causing the wrong policy version file to be created
  - Switch sandbox to start using openbox rather then matchbox
  - Make sepolgen a symlink to sepolicy
  - update translations


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-6
changelog:
  - Fix newrole to retain cap_audit_write when compiled with namespace, also
  do not drop capabilities when run as root.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-7
changelog:
  - Add --root/-r flag to sepolicy manpage,
  - This allows us to generate man pages on the fly in the selinux-policy build


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-8
changelog:
  - Sepolixy should not throw an exception on an SELinux disabled machine
  - Switch from using console app to using pkexec, so we will work better
  with policykit.
  - Add missing import to fix system-config-selinux startup
  - Add comment to pamd files about pam_rootok.so
  - Fix sepolicy generate to not comment out the first line


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-10
changelog:
  - Fix sepolicy to be able to work on an SELinux disabled system.
  - Needed to be able to build man pages in selinux-policy package


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-12
changelog:
  - Do not load interface file by default when sepolicy is called, mov get_all_methods to the sepolicy package


author: Rahul Sundaram <sundaram@fedoraproject.org> - 2.1.14-13
changelog:
  - remove vendor tag from desktop file. https://fedorahosted.org/fpc/ticket/247
  - clean up spec to follow current guidelines


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-14
changelog:
  - Allow users with symlinked homedirs to work. call realpath on homedir
  - Fix sepolicy reorganization of helper functions.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-20
changelog:
  - Mention creation of permissive domains in sepolicy generate man page
  - Change sepolicy manpage to use shortname with an "_" to stop accidently grabbing unrelated types for a domain.
  - Fix audit2allow to show better information on constraint violations.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-21
changelog:
  - sepolicy generate should look for booleans that effect equivalence names, and add them to the man page


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-22
changelog:
  - Fix newrole to not drop capabilities from the bounding set.
  - Stop dropping capabilities from its children.
  - Add better error messages.
  - Change location of bash_completion files to /usr/share/bash-completion/compl


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-23
changelog:
  - sepolicy manpage:
  -   use nroff instead of man2html
  -   Remove checking for name of person who created the man page
  - audit2allow
  -   Fix output to show the level that is different.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-26
changelog:
  - Can not unshare IPC in sandbox, since it blows up Xephyr
  - Remove bogus error message sandbox about reseting setfsuid


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-28
changelog:
  - Fix audit2allow output to better align analysys with the allow rules
  - Apply Miroslav Grepl patch to clean up sepolicy generate usage
  - Apply Miroslav Grepl patch to fixupt handing of admin_user generation
  - Update Tranlslations


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-30
changelog:
  - Add buildrequires for OpenBox to prevent me from accidently building into RHEL7
  - Add support for returning alias data to sepolicy.info python bindings


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-31
changelog:
  - Add post install scripts for gui to make sure Icon Cache is refreshed.
  - Fix grammar issue in secon man page
  - Update Translations


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-32
changelog:
  - Move sepolicy to policycoreutils-devel pacage, since most of it is used for devel
  - Apply Miroslav Grepl Patches for sepolicy
  -- Fix generate mutually groups option handling
  -- EUSER is used for existing policy
  -- customize options can be used together with admin_domain option
  -- Fix manpage.py to generate correct man pages for SELinux users
  -- Fix policy *.te file generated by customize+writepaths options
  -- Fix install script for confined_admin option


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-34
changelog:
  - Update translations
  - Add patch inspired by Miroslav Grepl to add extended information for sepolicy interface command.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-35
changelog:
  - Update translations
  - Add patch by Miroslav Grepl to add compile test for sepolicy interface command.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-37
changelog:
  - Fix exceptionion hanling in audit2allow -o
  - Generate Man pages for everydomain, not just ones with exec_t entrypoints
  - sepolicy comunicate should return ValueError not TypeError
  - Trim header line in sepolicy manpage to use less space
  - Add missing options to restorecon man page


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-38
changelog:
  - No longer run sepolgen-ifgen at install time.
  - Run sepolgen-ifgen in audit2allow and sepolicy generate, if needed.
  - Update Translations


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-39
changelog:
  - Run sepolgen-ifgen in audit2allow and sepolicy generate, if needed, first time
  - Add  Sven Vermeulen  patches to cleanup man pages


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-40
changelog:
  - Only require selinux-policy-devel for policycoreutils-devel, this will shrink the size of the livecd.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-42
changelog:
  - Add support for Xephyr -resizable, so sandbox can now resize window
  - Add support for compressed policy.xml
  - Miroslav Grepl patch to allow sepolicy interface on individual interface fil
  - Also add capability to test interfaces for correctness.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-44
changelog:
  - Fix sepolicy-generate man page to clear up options/policy type
  - Add Miroslav Grepl to not generate man page when doing
    sepolicy generate --customize
  - Add support for executing semanage user within spec file
  - Fix generation of confined admin domains, to handle booleans properly.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-46
changelog:
  - Fix the name of the spec file generated in the build script
  - Add mgrepl patch to support argparse for semanage command parsing


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-48
changelog:
  - Fix audit2allow -o to open file for append
  - Fix the name of the spec file generated in the build script


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-50
changelog:
  - Fix sepolicy generate --confined_admin to generate tunables
  - Add new interface to generate entrypoints for use with new gui


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-56
changelog:
  - Fix semanage export/import commands
  - Fix semange module command
  - Remove --version option from sandbox


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-57
changelog:
  - Remove requires for systemd-sysv
  - Move systemd-units require to restorecond section
  - Update Tranlasions
  - More sepolicy interfaces for gui
  - Cleanup man pages for sepolicy generate


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-63
changelog:
  - Update sepolicy gui.
  - Error out of you call sepolicy gui without policycoreutils-gui package installed
  - Fix semanage login -d command
  - Update Translations


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-65
changelog:
  - Do not generate shell script or spec file for sepolicy generate --newtype
  - Update translations
  - Fix sepolicy generate --admin_user man page again
  - Fix setsebool to print less verbose error messages by default, add -V for ve


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-68
changelog:
  - Fix bugs introduced by previous patch.  semanage port
  - Update Translations
  - Add test suite for sepolicy command lines


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-75
changelog:
  - Update sepolicy gui code, cleanups and add file transition tab
  - Fix semanage fcontext -a --ftype code to work.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-79
changelog:
  - Add Miroslav Grepl setsebool patch to give better error message on bad boolean names
  - Additional help screens for sepolicy gui


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-80
changelog:
  - Random fixes for sepolicy gui
    * Do not prompt for password until you make a change
    * Add user mappings and selinux users page
    * lots of code cleanup

  - Verify homedir is owned by user before mounting over it with seunshare
  - Fix fixfiles to handle Relabel properly
  - Fix semanage fcontext -e / command to allow "/"


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-82
changelog:
  - Improvements to sepolicy gui
    - Add more help information
    - Cleanup code
    - Add deny_ptrace on lockdown screen
    - Make unconfined/permissivedomains lockdown work
    - Add more support for file equivalency


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-85
changelog:
  - Fixes for fixfiles
    * exclude_from_dirs should apply to all types of restorecon calls
    * fixfiles check now works
    * exit with the correct status

  - semanage no longer import selinux


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-86
changelog:
  - sepolicy gui
    - mgrepl added delete screens for users and login
    - Fix lots of bugs.
  - Update Translations.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-88
changelog:
  - Cleanup errors found by pychecker
  - Apply patch from Michal Trunecka to allow restorecon to handle {} in globs
  Resolves: #1018913


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-89
changelog:
  - Update to latest sepolicy tool chain.
  - Document semodule -P
  - Verify input to semanage permissive -a is a valid domain.
  - Assigning login user with semanage login, range should default to user record


author: Dan Walsh <dwalsh@redhat.com> - 2.2-1
changelog:
  - Update to upstream 
  	* Properly build the swig exception file from Laurent Bigonville.
  	* Fix man pages from Laurent Bigonville.
  	* Support overriding PATH and INITDIR in Makefile from Laurent Bigonville.
  	* Fix LDFLAGS usage from Laurent Bigonville.
  	* Fix init_policy warning from Laurent Bigonville.
  	* Fix semanage logging from Laurent Bigonville.
  	* Open newrole stdin as read/write from Sven Vermeulen.
  	* Fix sepolicy transition from Sven Vermeulen.
  	* Support overriding CFLAGS from Simon Ruderich.
  	* Create correct man directory for run_init from Russell Coker.
  	* restorecon GLOB_BRACE change from Michal Trunecka.
  	* Extend audit2why to report additional constraint information.
  	* Catch IOError errors within audit2allow from Dan Walsh.
  	* semanage export/import fixes from Dan Walsh.
  	* Improve setfiles progress reporting from Dan Walsh.
  	* Document setfiles -o option in usage from Dan Walsh.
  	* Change setfiles to always return -1 on failure from Dan Walsh.
  	* Improve setsebool error r eporting from Dan Walsh.
  	* Major overhaul of gui from Dan Walsh.
  	* Fix sepolicy handling of non-MLS policy from Dan Walsh.
  	* Support returning type aliases from Dan Walsh.
  	* Add sepolicy tests from Dan Walsh.
  	* Add org.selinux.config.policy from Dan Walsh.
  	* Improve range and user input checking by semanage from Dan Walsh.
  	* Prevent source or target arguments that end with / for substitutions from Dan Walsh.
  	* Allow use of <<none>> for semanage fcontext from Dan Walsh.
          * Report customized user levels from Dan Walsh.
  	* Support deleteall for restoring disabled modules from Dan Walsh.
  	* Improve semanage error reporting from Dan Walsh.
  	* Only list disabled modules for module locallist from Dan Walsh.
  	* Fix logging from Dan Walsh.
  	* Define new constants for file type character codes from Dan Walsh.
  	* Improve bash completions from Dan Walsh.
  	* Convert semanage to argparse from Dan Walsh (originally by Dave Quigley).
  	* Add semanage tests from Dan Walsh.
  	* Split semanage man pages from Dan Walsh.
  	* Move bash completion scripts from Dan Walsh.
  	* Replace genhomedircon script with a link to semodule from Dan Walsh.
  	* Fix fixfiles from Dan Walsh.
  	* Add support for systemd service for restorecon from Dan Walsh.
  	* Spelling corrections from Dan Walsh.
  	* Improve sandbox support for home dir symlinks and file caps from Dan Walsh.
  	* Switch sandbox to openbox window manager from Dan Walsh.
  	* Coalesce audit2why and audit2allow from Dan Walsh.
  	* Change audit2allow to append to output file from Dan Walsh.
  	* Update translations from Dan Walsh.
  	* Change audit2why to use selinux_current_policy_path from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> - 2.2-2
changelog:
  - Shift around some of the files to more appropriate packages.
          * semodule_* packages are required for devel.


author: Dan Walsh <dwalsh@redhat.com> - 2.2.2-1
changelog:
  Resolves: #1002529
  Resolves: #924105
  Resolves: #918140
  Resolves: #1028096

  - Speed up startup time of sepolicy gui
  - Clean up ports screen to only show enabled ports.
  - Update to upstream 
  	* Remove import policycoreutils.default_encoding_utf8 from semanage from Dan Walsh.
  	* Make yum/extract_rpms optional for sepolicy generate from Dan Walsh.
  	* Add test suite for audit2allow and sepolgen-ifgen from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> - 2.2.3-1
changelog:
  - Update to upstream 
  	* Apply polkit check on all dbus interfaces and restrict to active user from Dan Walsh.
  	* Fix typo in sepolicy gui dbus.relabel_on_boot call from Dan Walsh.
  - Apply Miroslav Grepl patch to fix TEMPLATETYPE_domtrans description in sepolicy generate


author: Dan Walsh <dwalsh@redhat.com> - 2.2.4-1
changelog:
  - Update to upstream 
  	* Revert automatic setting of serange and seuser in seobject; was breaking non-MLS systems.
  - Add patches for sepolicy gui from mgrepl to
    Fix advanced_item_button_push() to allow to select an application in advanced search menu
    Fix previously_modified_initialize() to show modified changes properly for all selections


author: Dan Walsh <dwalsh@redhat.com> - 2.2.4-5
changelog:
  - Fix semanage man page description of import command
  - Fix policy kit file to allow changing to permissive mode


author: Dan Walsh <dwalsh@redhat.com> - 2.2.4-6
changelog:
  - Fix sepolicy gui selection for advanced screen
  - Update Translations
  - Move requires checkpolicy requirement into policycoreutils-python
  Resolves: #1043489


author: Dan Walsh <dwalsh@redhat.com> - 2.2.5-1
changelog:
  - Fix Mass Rebuild problems
  - Update to upstream 
  	* Ignore selevel/serange if MLS is disabled from Sven Vermeulen.
  Resolves: #1043489


author: Dan Walsh <dwalsh@redhat.com> - 2.2.5-3
changelog:
  - Add Miroslav patch to
  - Fix previously_modified_initialize() to show modified changes properly for all selections
  Resolves: #1049977


author: Miroslav Grepl <mgrepl@redhat.com> - 2.2.5-5
changelog:
  - Remove default s0 range from semanage-login command. It is handled in seobject.py.
  Resolves:#1028106


author: Miroslav Grepl <mgrepl@redhat.com> - 2.2.5-12
changelog:
  - Make selinux-policy build working also on another architectures related to sepolicy-manpage generate
  Resolves:#1103292


author: Miroslav Grepl <mgrepl@redhat.com> - 2.2.5-13
changelog:
  - If the user attempts to restorecon the label of a file that does not exist, do not report this as an error
  Resolves:#1082956
  - Make fixfiles_exclude_dirs working if there is a substituion for the given directory
  Resolves:#1082676
  - Add ability to list the actual active modules
  Resolves:#1075023
  - Update XDG_RUNTIME_DIR directory
  Resolves:#1112811
  - Fix semanage man page to talk about  semanage-* (8) man pages.
  Resolves:#1084390


author: Petr Lautrbach <plautrba@redhat.com> 2.2.5-16
changelog:
  - semanage: Use OrderedDict for list of fcontexts
  Resolves: rhbz#1206769
  - fixfiles: Cover file_context.XXX.homedir
  Resolves: rhbz#1186640


author: Petr Lautrbach <plautrba@redhat.com> 2.2.5-17
changelog:
  - Fix handling of Forking daemon, to allow systemd to handle it better
  Resolves: rhbz#1186648
  - Fix typo in semanage args for minimum policy store
  Resolves: rhbz#1208797
  - Allow to define sock file in /etc directory
  Resolves: rhbz#1188360


author: Petr Lautrbach <plautrba@redhat.com> - 2.5-2
changelog:
  - sepolgen: Add support for TYPEBOUNDS statement in INTERFACE policy
    files (#1319338)
  - Add documentation for MCS separated domains
  - Move svirt man page out of libvirt into its own


author: Petr Lautrbach <plautrba@redhat.com> - 2.5-3
changelog:
  - Update sandbox types in sandbox manual
  - Fix typos in semanage manpages
  - Fix the documentation of -l,--list for semodule
  - Minor fix in a French translation
  - Fix the extract example in semodule.8
  - Update sandbox.8 man page
  - Remove typos from chcat --help
  - Fix multiple spelling errors
  - hll/pp: Warn if module name different than output filename


author: Petr Lautrbach <plautrba@redhat.com> 2.5-6.2
changelog:
  - open_init_pty: Do not error on EINTR
  - Fix [-s STORE] typos in semanage
  - Don't use subprocess.getstatusoutput() in Python 2 code


author: Petr Lautrbach <plautrba@redhat.com> 2.5-7
changelog:
  - fixfiles: Pass -n to restorecon for fixfiles check
  - sepolicy: Check get_rpm_nvr_list() return value
  - Don't use subprocess.getstatusoutput() in Python 2 code
  - semanage: Add auditing of changes in records
  - Remove unused 'q' from semodule getopt string


author: Petr Lautrbach <plautrba@redhat.com> 2.5-8
changelog:
  - audit2allow: tests should use local copy not system
  - audit2allow: remove audit2why so that it gets symlinked
  - semanage: fix man page and help message for import option
  - semanage: fix error message for fcontext -m
  - semanage: Fix semanage fcontext -D
  - semanage: Correct fcontext auditing
  - semanage: Default serange to "s0" for port modify
  - semanage: Use socket.getprotobyname for protocol
  - semanage: fix modify action in node and interface


author: Petr Lautrbach <plautrba@redhat.com> 2.5-9
changelog:
  - sandbox: create a new session for sandboxed processes - CVE-2016-7545
  - sandbox: do not try to setup directories without -X or -M


author: David Woodhouse <dwmw2@infradead.org> 0.7.0-2
changelog:
  - Proper fix for GCC 4 putting 'blr' or 'ret' in the middle of the function,
    for i386, x86_64 and PPC.


author: David Woodhouse <dwmw2@infradead.org> 0.8.0-3
changelog:
  - Use -mcpu= instead of -mtune= on x86_64 too
  - Disable SPARC targets on x86_64, because dyngen doesn't like fnegs


author: Matthias Saou <http://freshrpms.net/> 0.8.2-1
changelog:
  - Update to 0.8.2 (#200065).
  - Drop upstreamed syscall-macros patch2.
  - Put correct scriplet dependencies.
  - Force install mode for the init script to avoid umask problems.
  - Add %postun condrestart for changes to the init script to be applied if any.
  - Update description with the latest "about" from the web page (more current).
  - Update URL to qemu.org one like the Source.
  - Add which build requirement.
  - Don't include texi files in %doc since we ship them in html.
  - Switch to using gcc34 on devel, FC5 still has gcc32.
  - Add kernheaders patch to fix linux/compiler.h inclusion.
  - Add target-sparc patch to fix compiling on ppc (some int32 to float).


author: Matthias Saou <http://freshrpms.net/> 0.8.2-2
changelog:
  - Remove the target-list iteration for x86_64 since they all build again.
  - Make gcc32 vs. gcc34 conditional on %{fedora} to share the same spec for
    FC5 and FC6.


author: Hans de Goede <j.w.r.degoede@hhs.nl> 0.9.0-2
changelog:
  - Fix direct loading of a linux kernel with -kernel & -initrd (bz 234681)
  - Remove spurious execute bits from manpages (bz 222573)


author: Daniel P. Berrange <berrange@redhat.com> - 0.9.0-3.fc8
changelog:
  - Added backport of VNC password auth, and TLS+x509 cert auth
  - Switch to rtl8139 NIC by default for linkstate reporting
  - Fix rtl8139 mmio region mappings with multiple NICs


author: Glauber Costa <glommer@redhat.com> - 1.0-0.1.svn6666
changelog:
  - Updated to tip svn (release 6666). Featuring split packages for qemu.
    Unfortunately, still using binary blobs for the bioses.


author: Glauber Costa <glommer@redhat.com> - 0.10-0.1.kvm20090303git
changelog:
  - Set Epoch to 1
  - Build KVM (basic build, no tools yet)
  - Set ppc in ExcludeArch. This is temporary, just to fix one issue at a time.
    ppc users (IBM ? ;-)) please wait a little bit.


author: Glauber Costa <glommer@redhat.com> - 0.92-0.1.kvm20090303git
changelog:
  - Set Epoch to 2
  - Set version to 0.92. It seems upstream keep changing minds here, so pick the lowest
  - Provides KVM, Obsoletes KVM
  - Only install qemu-kvm in ix86 and x86_64
  - Remove pkgdesc macros, as they were generating bogus output for rpm -qi.
  - fix ppc and ppc64 builds


author: Glauber Costa <glommer@redhat.com> - 2:0.10-0.5.kvm20090303git
changelog:
  - kvm.modules were being wrongly mentioned at %install.
  - update description for the x86 system package to include kvm support
  - build kvm's own bios. It is still necessary while kvm uses a slightly different
    irq routing mechanism


author: Glauber Costa <glommer@redhat.com> - 2:0.10-0.8.kvm20090310git
changelog:
  - fix Obsolete/Provides pair
  - Use kvm bios from bochs-bios package.
  - Using RPM_OPT_FLAGS in configure
  - Picked back audio-drv-list from kvm package


author: Glauber Costa <glommer@redhat.com> - 2:0.10-0.11.kvm20090323git
changelog:
  - Update to snapshot kvm20090323.
  - Removed patch2 (upstream).
  - use upstream's new split package.
  - --with-patched-kernel flag not needed anymore
  - Tell how to get the sources.


author: Glauber Costa <glommer@redhat.com> - 2:0.10-1
changelog:
  - Include debuginfo for qemu-img
  - Do not require qemu-common for qemu-img
  - Explicitly own each of the firmware files
  - remove firmwares for ppc and sparc. They should be provided by an external package.
    Not that the packages exists for sparc in the secondary arch repo as noarch, but they
    don't automatically get into main repos. Unfortunately it's the best we can do right
    now.
  - rollback a bit in time. Snapshot from avi's maint/2.6.30
    - this requires the sasl patches to come back.
    - with-patched-kernel comes back.


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10-5
changelog:
  - Fix vga segfault under kvm-autotest (#494002)
  - Kill kernelrelease hack; it's not needed
  - Build with "make V=1" for more verbose logs


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-1.kvm85
changelog:
  - Update to qemu-kvm-devel-85
  - kvm-85 is based on qemu development branch, currently version 0.10.50
  - Include new qemu-io utility in qemu-img package
  - Re-instate -help string for boot=on to fix virtio booting with libvirt
  - Drop upstreamed patches
  - Fix missing kernel/include/asm symlink in upstream tarball
  - Fix target-arm build
  - Fix build on ppc
  - Disable preadv()/pwritev() until bug #497429 is fixed
  - Kill more .kernelrelease uselessness
  - Make non-kvm qemu build verbose


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-5.kvm86
changelog:
  - Prevent locked cdrom eject - fixes hang at end of anaconda installs (#501412)
  - Avoid harmless 'unhandled wrmsr' warnings (#499712)


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-6.kvm86
changelog:
  - Fix 'kernel requires an x86-64 CPU' error
  - BuildRequires ncurses-devel to enable '-curses' option (#504226)


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-7.kvm87
changelog:
  - Update to kvm-87
  - Drop upstreamed patches
  - Cherry-pick new ppc build fix from upstream
  - Work around broken linux-user build on ppc
  - Fix hw/pcspk.c build with --disable-kvm
  - Re-enable preadv()/pwritev() since #497429 is long since fixed
  - Kill petalogix-s3adsp1800.dtb, since we don't ship the microblaze target


author: Daniel Berrange <berrange@lettuce.camlab.fab.redhat.com> - 2:0.10.50-10.kvm87
changelog:
  - Add udev rules to make /dev/kvm world accessible & group=kvm (rhbz #497341)
  - Create a kvm group if it doesn't exist (rhbz #346151)


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-11.kvm88
changelog:
  - Update to kvm-88, see http://www.linux-kvm.org/page/ChangeLog
  - Package mutiboot.bin
  - Update for how extboot is built
  - Fix sf.net source URL
  - Drop qemu-fix-ppc-softmmu-kvm-disabled-build.patch
  - Drop qemu-fix-pcspk-build-with-kvm-disabled.patch
  - Cherry-pick fix for esound support build failure


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.91-0.1.rc1.rc0
changelog:
  - Update to qemu-kvm-0.11.0-rc1-rc0
  - This is a pre-release of the official -rc1
  - A vista installer regression is blocking the official -rc1 release
  - Drop qemu-prefer-sysfs-for-usb-host-devices.patch
  - Drop qemu-fix-build-for-esd-audio.patch
  - Drop qemu-slirp-Fix-guestfwd-for-incoming-data.patch
  - Add patch to ensure extboot.bin is installed


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.92-1
changelog:
  - Update to qemu-kvm-0.11.0-rc2
  - Drop upstreamed patches
  - extboot install now fixed upstream
  - Re-place TCG init fix (#516543) with the one gone upstream


author: Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-4
changelog:
  - Use rtl8029 PXE rom for ne2k_pci, not ne (#526777)
  - Also, replace the gpxe-roms-qemu pkg requires with file-based requires


author: Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-6
changelog:
  - Fix fs errors with virtio and qcow2 backing file (#524734)
  - Fix ksm initscript errors on kernel missing ksm (#527653)
  - Add missing Requires(post): getent, useradd, groupadd (#527087)


author: Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-12
changelog:
  - Fix a use-after-free crasher in the slirp code (#539583)
  - Fix overflow in the parallels image format support (#533573)


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.12.2-5
changelog:
  - Avoid creating too large iovecs in multiwrite merge (#559717)
  - Don't try to set max_kernel_pages during ksm init on newer kernels (#558281)
  - Add logfile options for ksmtuned debug.


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.12.3-1
changelog:
  - Update to 0.12.3 upstream
  - vhost-net migration/restart fixes
  - Add F-13 machine type
  - virtio-serial fixes


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.12.3-6
changelog:
  - Change requires to the noarch seabios-bin
  - Add ownership of docdir to qemu-common (#572110)
  - Fix "Cannot boot from non-existent NIC" error when using virt-install (#577851)


author: Dan Horák <dan[at]danny.cz> - 2:0.12.3-8
changelog:
  - Add avoid-llseek patch from upstream needed for building on s390(x)
  - Don't use parallel make on s390(x)


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.13.0-0.3.20100809git25fdf4a
changelog:
  - Updates from upstream towards 0.13 stable
  - Fix requires on gpxe
  - enable spice now that buildreqs are in the repository.
  - ksmtrace has moved to a separate upstream package


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.13.0-1
changelog:
  - Update to 0.13.0 upstream release
  - Fixes for vhost
  - Fix mouse in certain guests (#636887)
  - Fix issues with WinXP guest install (#579348)
  - Resolve build issues with S390 (#639471)
  - Fix Windows XP on Raw Devices (#631591)


author: Daniel P. Berrange <berrange@redhat.com> - 2:0.13.0-2
changelog:
  - Revert previous change
  - Make qemu-common own the /etc/qemu directory
  - Add /etc/qemu/target-x86_64.conf to qemu-system-x86 regardless
    of host architecture.


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.14.0-0.1.20110210git7aa8c46
changelog:
  - Update git snapshot
  - Temporarily disable qemu-cris and qemu-sparc due to build errors (to be resolved shorly)


author: Richard W.M. Jones <rjones@redhat.com> - 2:0.14.0-9
changelog:
  - Add BR libattr-devel.  This caused the -fstype option to be disabled.
    https://www.redhat.com/archives/libvir-list/2011-June/thread.html#01017


author: Hans de Goede <hdegoede@redhat.com> - 2:0.15.0-0.2.20110718525e3df
changelog:
  - Add support usb redirection over the network, see:
    http://fedoraproject.org/wiki/Features/UsbNetworkRedirection
  - Restore chardev flow control patches


author: Richard W.M. Jones <rjones@redhat.com> - 2:0.15.0-2
changelog:
  - Add upstream qemu patch 'Allow to leave type on default in -machine'
    (2645c6dcaf6ea2a51a3b6dfa407dd203004e4d11).


author: Daniel P. Berrange <berrange@redhat.com> - 2:0.15.0-4
changelog:
  - Enable DTrace tracing backend for SystemTAP (rhbz #737763)
  - Enable build with curl (rhbz #737006)


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.15.1-1
changelog:
  - Require seabios-bin >= 0.6.0-2 (#741992)
  - Replace init scripts with systemd units (#741920)
  - Update to 0.15.1 stable upstream


author: Richard W.M. Jones <rjones@redhat.com> - 2:1.1.0-4
changelog:
  - Disable tests since they hang intermittently.
  - Add kvmvapic.bin (replaces vapic.bin).
  - Add cpus-x86_64.conf.  qemu now creates /etc/qemu/target-x86_64.conf
    as an empty file.
  - Add qemu-icon.bmp.
  - Add qemu-bridge-helper.
  - Build and include virtfs-proxy-helper + man page (thanks Hans de Goede).


author: Richard W.M. Jones <rjones@redhat.com> - 2:1.1.0-7
changelog:
  - Add patch to fix default machine options.  This fixes libvirt
    detection of qemu.
  - Back out patch 1 which conflicts.


author: Cole Robinson <crobinso@redhat.com> - 1.1.1-1
changelog:
  - Upstream stable release 1.1.1
  - Fix systemtap tapsets (bz 831763)
  - Fix VNC audio tunnelling (bz 840653)
  - Don't renable ksm on update (bz 815156)
  - Bump usbredir dep (bz 812097)
  - Fix RPM install error on non-virt machines (bz 660629)
  - Obsolete openbios to fix upgrade dependency issues (bz 694802)


author: Adam Jackson <ajax@redhat.com> 1.2.0-0.5.rc1
changelog:
  - Flip Requires: ceph >= foo to Conflicts: ceph < foo, so we pull in only the
    libraries which we need and not the rest of ceph which we don't.


author: Hans de Goede <hdegoede@redhat.com> - 2:1.2.0-1
changelog:
  - New upstream release 1.2.0 final
  - Add support for Spice seamless migration
  - Add support for Spice dynamic monitors
  - Add support for usb-redir live migration


author: Richard W.M. Jones <rjones@redhat.com> - 2:1.2.0-8
changelog:
  - Use 'global' instead of 'define', and underscore in definition name,
    n-v-r, and 'dist' tag of SLOF, all to fix RHBZ#855252.


author: Hans de Goede <hdegoede@redhat.com> - 2:1.2.0-11
changelog:
  - Rebuild against latest spice-server and spice-protocol
  - Fix non-seamless migration failing with vms with usb-redir devices,
    to allow boxes to load such vms from disk


author: Paolo Bonzini <pbonzini@redhat.com> - 2:1.2.0-13
changelog:
  - Add ppc support to kvm.modules (original patch by David Gibson)
  - Replace x86only build with kvmonly build: add separate defines and
    conditionals for all packages, so that they can be chosen and
    renamed in kvmonly builds and so that qemu has the appropriate requires
  - Automatically pick libfdt dependancy
  - Add knob to disable spice+seccomp


author: Paolo Bonzini <pbonzini@redhat.com> - 2:1.2.0-16
changelog:
  - add s390x KVM support
  - distribute pre-built firmware or device trees for Alpha, Microblaze, S390
  - add missing system targets
  - add missing linux-user targets
  - fix previous commit


author: Cole Robinson <crobinso@redhat.com> - 2:1.2.0-18
changelog:
  - Fix loading arm initrd if kernel is very large (bz #862766)
  - Don't use reserved word 'function' in systemtap files (bz #870972)
  - Drop assertion that was triggering when pausing guests w/ qxl (bz


author: Hans de Goede <hdegoede@redhat.com> - 2:1.2.0-19
changelog:
  - Sync spice patches with upstream, minor bugfixes and set the qxl pci
    device revision to 4 by default, so that guests know they can use
    the new features


author: Cole Robinson <crobinso@redhat.com> - 2:1.3.0-1
changelog:
  - Switch base tarball from qemu-kvm to qemu
  - qemu 1.3 release
  - Option to use linux VFIO driver to assign PCI devices
  - Many USB3 improvements
  - New paravirtualized hardware random number generator device.
  - Support for Glusterfs volumes with "gluster://" -drive URI
  - Block job commands for live block commit and storage migration


author: Michal Novotny <minovotn@redhat.com> - 2:1.3.0-3
changelog:
  - Remove dependency on bogus qemu-kvm-kvm package [bz#870343]
  - Resolves: bz#870343
    (qemu-kvm-1.2.0-16.el7 cant be installed)


author: Michal Novotny <minovotn@redhat.com> - 2:1.3.0-5
changelog:
  - Fix patch contents for usb-redir (bz#895491)
  - Resolves: bz#895491
    (PATCH: 0110-usb-redir-Add-flow-control-support.patch has been mangled on rebase !!)


author: Alon Levy <alevy@redhat.com> - 3:1.3.0-6
changelog:
  - Bump epoch back to 3 since there has already been a 3 package release:
    3:1.2.0-20.el7 https://brewweb.devel.redhat.com/buildinfo?buildID=244866
  - Mark explicit libcacard dependency on new enough qemu-img to avoid conflict
    since /usr/bin/vscclient was moved from qemu-img to libcacard subpackage.


author: Michal Novotny <minovotn@redhat.com> - 3:1.3.0-8
changelog:
  - Missing package qemu-system-x86 in hardware certification kvm testing (bz#912433)
  - Resolves: bz#912433
    (Missing package qemu-system-x86 in hardware certification kvm testing)


author: Miroslav Rezanina <mrezanin@redhat.com> - 3:1.4.0-4
changelog:
  - Enable build of libcacard subpackage for non-x86_64 archs (bz #873174)
  - Enable build of qemu-img subpackage for non-x86_64 archs (bz #873174)
  - Enable build of qemu-guest-agent subpackage for non-x86_64 archs (bz #873174)


author: Miroslav Rezanina <mrezanin@redhat.com> - 3:1.5.0-2
changelog:
  - Enable werror (bz #948290)
  - Enable nbd driver (bz #875871)
  - Fix udev rules file location (bz #958860)
  - Remove +x bit from systemd unit files (bz #965000)
  - Drop unneeded kvm.modules on x86 (bz #963642)
  - Fix build flags
  - Enable libusb


author: Miroslav Rezanina <mrezanin@redhat.com> - 10:1.5.1-2
changelog:
  - Fix package package version info (bz #952996)
  - pc: Replace upstream machine types by RHEL-7 types (bz #977864)
  - target-i386: Update model values on Conroe/Penryn/Nehalem CPU model (bz #861210)
  - target-i386: Set level=4 on Conroe/Penryn/Nehalem (bz #861210)


author: Miroslav Rezanina <mrezanin@redhat.com> - 10:1.5.2-2
changelog:
  - SPEC file prepared for RHEL/RHEV split (rhbz #987165)
  - RHEL guest( sata disk ) can not boot up (rhbz #981723)
  - Kill the "use flash device for BIOS unless KVM" misfeature (rhbz #963280)
  - Provide RHEL-6 machine types (rhbz #983991)
  - Change s3/s4 default to "disable". (rhbz #980840)  
  - Support Virtual Memory Disk Format in qemu (rhbz #836675)
  - Glusterfs backend for QEMU (rhbz #805139)


author: Miroslav Rezanina <mrezanin@redhat.com> - 10:1.5.2-3
changelog:
  - query mem info from monitor would cause qemu-kvm hang [RHEL-7] (rhbz #970047)
  - Throttle-down guest to help with live migration convergence (backport to RHEL7.0) (rhbz #985958)
  - disable (for now) EFI-enabled roms (rhbz #962563)
  - qemu-kvm "vPMU passthrough" mode breaks migration, shouldn't be enabled by default (rhbz #853101)
  - Remove pending watches after virtserialport unplug (rhbz #992900)
  - Containment of error when an SR-IOV device encounters an error... (rhbz #984604)


author: Miroslav Rezanina <mrezanin@redhat.com> - 10:1.5.2-4
changelog:
  - qemu: guest agent creates files with insecure permissions in deamon mode [rhel-7.0] (rhbz 974444)
  - update qemu-ga config & init script in RHEL7 wrt. fsfreeze hook (rhbz 969942)
  - RHEL7 does not have equivalent functionality for __com.redhat_qxl_screendump (rhbz 903910)
  - SEP flag behavior for CPU models of RHEL6 machine types should be compatible (rhbz 960216)
  - crash command can not read the dump-guest-memory file when paging=false [RHEL-7] (rhbz 981582)
  - RHEL 7 qemu-kvm fails to build on F19 host due to libusb deprecated API (rhbz 996469)
  - Live migration support in virtio-blk-data-plane (rhbz 995030)
  - qemu-img resize can execute successfully even input invalid syntax (rhbz 992935)


author: Miroslav Rezanina <mrezanin@redhat.com> - qemu-kvm-1.5.3-2.el7
changelog:
  - kvm-osdep-add-qemu_get_local_state_pathname.patch [bz#964304]
  - kvm-qga-determine-default-state-dir-and-pidfile-dynamica.patch [bz#964304]
  - kvm-configure-don-t-save-any-fixed-local_statedir-for-wi.patch [bz#964304]
  - kvm-qga-create-state-directory-on-win32.patch [bz#964304]
  - kvm-qga-save-state-directory-in-ga_install_service-RHEL-.patch [bz#964304]
  - kvm-Makefile-create-.-var-run-when-installing-the-POSIX-.patch [bz#964304]
  - kvm-qemu-option-Fix-qemu_opts_find-for-null-id-arguments.patch [bz#980782]
  - kvm-qemu-option-Fix-qemu_opts_set_defaults-for-corner-ca.patch [bz#980782]
  - kvm-vl-New-qemu_get_machine_opts.patch [bz#980782]
  - kvm-Fix-machine-options-accel-kernel_irqchip-kvm_shadow_.patch [bz#980782]
  - kvm-microblaze-Fix-latent-bug-with-default-DTB-lookup.patch [bz#980782]
  - kvm-Simplify-machine-option-queries-with-qemu_get_machin.patch [bz#980782]
  - kvm-pci-add-VMSTATE_MSIX.patch [bz#838170]
  - kvm-xhci-add-XHCISlot-addressed.patch [bz#838170]
  - kvm-xhci-add-xhci_alloc_epctx.patch [bz#838170]
  - kvm-xhci-add-xhci_init_epctx.patch [bz#838170]
  - kvm-xhci-add-live-migration-support.patch [bz#838170]
  - kvm-pc-set-level-xlevel-correctly-on-486-qemu32-CPU-mode.patch [bz#918907]
  - kvm-pc-Remove-incorrect-rhel6.x-compat-model-value-for-C.patch [bz#918907]
  - kvm-pc-rhel6.x-has-x2apic-present-on-Conroe-Penryn-Nehal.patch [bz#918907]
  - kvm-pc-set-compat-CPUID-0x80000001-.EDX-bits-on-Westmere.patch [bz#918907]
  - kvm-pc-Remove-PCLMULQDQ-from-Westmere-on-rhel6.x-machine.patch [bz#918907]
  - kvm-pc-SandyBridge-rhel6.x-compat-fixes.patch [bz#918907]
  - kvm-pc-Haswell-doesn-t-have-rdtscp-on-rhel6.x.patch [bz#918907]
  - kvm-i386-fix-LAPIC-TSC-deadline-timer-save-restore.patch [bz#972433]
  - kvm-all.c-max_cpus-should-not-exceed-KVM-vcpu-limit.patch [bz#996258]
  - kvm-add-timestamp-to-error_report.patch [bz#906937]
  - kvm-Convert-stderr-message-calling-error_get_pretty-to-e.patch [bz#906937]
  - Resolves: bz#838170
    (Add live migration support for USB [xhci, usb-uas])
  - Resolves: bz#906937
    ([Hitachi 7.0 FEAT][QEMU]Add a time stamp to error message (*))
  - Resolves: bz#918907
    (provide backwards-compatible RHEL specific machine types in QEMU - CPU features)
  - Resolves: bz#964304
    (Windows guest agent service failed to be started)
  - Resolves: bz#972433
    ("INFO: rcu_sched detected stalls" after RHEL7 kvm vm migrated)
  - Resolves: bz#980782
    (kernel_irqchip defaults to off instead of on without -machine)
  - Resolves: bz#996258
    (boot guest with maxcpu=255 successfully but actually max number of vcpu is 160)


author: Michal Novotny <minovotn@redhat.com> - qemu-kvm-1.5.3-4.el7
changelog:
  - kvm-block-package-preparation-code-in-qmp_transaction.patch [bz#1005818]
  - kvm-block-move-input-parsing-code-in-qmp_transaction.patch [bz#1005818]
  - kvm-block-package-committing-code-in-qmp_transaction.patch [bz#1005818]
  - kvm-block-package-rollback-code-in-qmp_transaction.patch [bz#1005818]
  - kvm-block-make-all-steps-in-qmp_transaction-as-callback.patch [bz#1005818]
  - kvm-blockdev-drop-redundant-proto_drv-check.patch [bz#1005818]
  - kvm-block-Don-t-parse-protocol-from-file.filename.patch [bz#1005818]
  - kvm-Revert-block-Disable-driver-specific-options-for-1.5.patch [bz#1005818]
  - kvm-qcow2-Add-refcount-update-reason-to-all-callers.patch [bz#1005818]
  - kvm-qcow2-Options-to-enable-discard-for-freed-clusters.patch [bz#1005818]
  - kvm-qcow2-Batch-discards.patch [bz#1005818]
  - kvm-block-Always-enable-discard-on-the-protocol-level.patch [bz#1005818]
  - kvm-qapi.py-Avoid-code-duplication.patch [bz#1005818]
  - kvm-qapi.py-Allow-top-level-type-reference-for-command-d.patch [bz#1005818]
  - kvm-qapi-schema-Use-BlockdevSnapshot-type-for-blockdev-s.patch [bz#1005818]
  - kvm-qapi-types.py-Implement-base-for-unions.patch [bz#1005818]
  - kvm-qapi-visit.py-Split-off-generate_visit_struct_fields.patch [bz#1005818]
  - kvm-qapi-visit.py-Implement-base-for-unions.patch [bz#1005818]
  - kvm-docs-Document-QAPI-union-types.patch [bz#1005818]
  - kvm-qapi-Add-visitor-for-implicit-structs.patch [bz#1005818]
  - kvm-qapi-Flat-unions-with-arbitrary-discriminator.patch [bz#1005818]
  - kvm-qapi-Add-consume-argument-to-qmp_input_get_object.patch [bz#1005818]
  - kvm-qapi.py-Maintain-a-list-of-union-types.patch [bz#1005818]
  - kvm-qapi-qapi-types.py-native-list-support.patch [bz#1005818]
  - kvm-qapi-Anonymous-unions.patch [bz#1005818]
  - kvm-block-Allow-driver-option-on-the-top-level.patch [bz#1005818]
  - kvm-QemuOpts-Add-qemu_opt_unset.patch [bz#1005818]
  - kvm-blockdev-Rename-I-O-throttling-options-for-QMP.patch [bz#1005818]
  - kvm-qemu-iotests-Update-051-reference-output.patch [bz#1005818]
  - kvm-blockdev-Rename-readonly-option-to-read-only.patch [bz#1005818]
  - kvm-blockdev-Split-up-cache-option.patch [bz#1005818]
  - kvm-qcow2-Use-dashes-instead-of-underscores-in-options.patch [bz#1005818]
  - kvm-qemu-iotests-filter-QEMU-version-in-monitor-banner.patch [bz#1006959]
  - kvm-tests-set-MALLOC_PERTURB_-to-expose-memory-bugs.patch [bz#1006959]
  - kvm-qemu-iotests-Whitespace-cleanup.patch [bz#1006959]
  - kvm-qemu-iotests-Fixed-test-case-026.patch [bz#1006959]
  - kvm-qemu-iotests-Fix-test-038.patch [bz#1006959]
  - kvm-qemu-iotests-Remove-lsi53c895a-tests-from-051.patch [bz#1006959]
  - Resolves: bz#1005818
    (qcow2: Backport discard command line options)
  - Resolves: bz#1006959
    (qemu-iotests false positives)


author: Miroslav Rezanina <mrezanin@redhat.com> - qemu-kvm-1.5.3-7.el7
changelog:
  - kvm-spice-fix-display-initialization.patch [bz#974887]
  - kvm-Remove-i82550-network-card-emulation.patch [bz#921983]
  - kvm-Remove-usb-wacom-tablet.patch [bz#903914]
  - kvm-Disable-usb-uas.patch [bz#903914]
  - kvm-Disable-vhost-scsi.patch [bz#994642]
  - kvm-Remove-no-hpet-option.patch [bz#947441]
  - kvm-Disable-isa-parallel.patch [bz#1002286]
  - kvm-xhci-implement-warm-port-reset.patch [bz#949514]
  - kvm-usb-add-serial-bus-property.patch [bz#953304]
  - kvm-rhel6-compat-usb-serial-numbers.patch [bz#953304]
  - kvm-vmdk-fix-comment-for-vmdk_co_write_zeroes.patch [bz#995866]
  - kvm-gluster-Add-image-resize-support.patch [bz#1007226]
  - kvm-block-Introduce-bs-zero_beyond_eof.patch [bz#1007226]
  - kvm-block-Produce-zeros-when-protocols-reading-beyond-en.patch [bz#1007226]
  - kvm-gluster-Abort-on-AIO-completion-failure.patch [bz#1007226]
  - kvm-Preparation-for-usb-bt-dongle-conditional-build.patch [bz#1001131]
  - kvm-Remove-dev-bluetooth.c-dependency-from-vl.c.patch [bz#1001131]
  - kvm-exec-Fix-Xen-RAM-allocation-with-unusual-options.patch [bz#1009328]
  - kvm-exec-Clean-up-fall-back-when-mem-path-allocation-fai.patch [bz#1009328]
  - kvm-exec-Reduce-ifdeffery-around-mem-path.patch [bz#1009328]
  - kvm-exec-Simplify-the-guest-physical-memory-allocation-h.patch [bz#1009328]
  - kvm-exec-Drop-incorrect-dead-S390-code-in-qemu_ram_remap.patch [bz#1009328]
  - kvm-exec-Clean-up-unnecessary-S390-ifdeffery.patch [bz#1009328]
  - kvm-exec-Don-t-abort-when-we-can-t-allocate-guest-memory.patch [bz#1009328]
  - kvm-pc_sysfw-Fix-ISA-BIOS-init-for-ridiculously-big-flas.patch [bz#1009328]
  - kvm-virtio-scsi-Make-type-virtio-scsi-common-abstract.patch [bz#903918]
  - kvm-qga-move-logfiles-to-new-directory-for-easier-SELinu.patch [bz#1009491]
  - kvm-target-i386-add-cpu64-rhel6-CPU-model.patch [bz#918907]
  - kvm-fix-steal-time-MSR-vmsd-callback-to-proper-opaque-ty.patch [bz#903889]
  - Resolves: bz#1001131
    (Disable or remove device usb-bt-dongle)
  - Resolves: bz#1002286
    (Disable or remove device isa-parallel)
  - Resolves: bz#1007226
    (Introduce bs->zero_beyond_eof)
  - Resolves: bz#1009328
    ([RFE] Nicer error report when qemu-kvm can't allocate guest RAM)
  - Resolves: bz#1009491
    (move qga logfiles to new /var/log/qemu-ga/ directory [RHEL-7])
  - Resolves: bz#903889
    (The value of steal time in "top" command always is "0.0% st" after guest migration)
  - Resolves: bz#903914
    (Disable or remove usb related devices that we will not support)
  - Resolves: bz#903918
    (Disable or remove emulated SCSI devices we will not support)
  - Resolves: bz#918907
    (provide backwards-compatible RHEL specific machine types in QEMU - CPU features)
  - Resolves: bz#921983
    (Disable or remove emulated network devices that we will not support)
  - Resolves: bz#947441
    (HPET device must be disabled)
  - Resolves: bz#949514
    (fail to passthrough the USB3.0 stick to windows guest with xHCI controller under pc-i440fx-1.4)
  - Resolves: bz#953304
    (Serial number of some USB devices must be fixed for older RHEL machine types)
  - Resolves: bz#974887
    (the screen of guest fail to display correctly when use spice + qxl driver)
  - Resolves: bz#994642
    (should disable vhost-scsi)
  - Resolves: bz#995866
    (fix vmdk support to ESX images)


author: Miroslav Rezanina <mrezanin@redhat.com> - qemu-kvm-1.5.3-8.el7
changelog:
  - kvm-vmdk-Make-VMDK3Header-and-VmdkGrainMarker-QEMU_PACKE.patch [bz#995866]
  - kvm-vmdk-use-unsigned-values-for-on-disk-header-fields.patch [bz#995866]
  - kvm-qemu-iotests-add-poke_file-utility-function.patch [bz#995866]
  - kvm-qemu-iotests-add-empty-test-case-for-vmdk.patch [bz#995866]
  - kvm-vmdk-check-granularity-field-in-opening.patch [bz#995866]
  - kvm-vmdk-check-l2-table-size-when-opening.patch [bz#995866]
  - kvm-vmdk-check-l1-size-before-opening-image.patch [bz#995866]
  - kvm-vmdk-use-heap-allocation-for-whole_grain.patch [bz#995866]
  - kvm-vmdk-rename-num_gtes_per_gte-to-num_gtes_per_gt.patch [bz#995866]
  - kvm-vmdk-Move-l1_size-check-into-vmdk_add_extent.patch [bz#995866]
  - kvm-vmdk-fix-L1-and-L2-table-size-in-vmdk3-open.patch [bz#995866]
  - kvm-vmdk-support-vmfsSparse-files.patch [bz#995866]
  - kvm-vmdk-support-vmfs-files.patch [bz#995866]
  - Resolves: bz#995866
    (fix vmdk support to ESX images)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-9.el7
changelog:
  - kvm-qxl-fix-local-renderer.patch [bz#1005036]
  - kvm-spec-include-userspace-iSCSI-initiator-in-block-driv.patch [bz#923843]
  - kvm-linux-headers-update-to-kernel-3.10.0-26.el7.patch [bz#1008987]
  - kvm-target-i386-add-feature-kvm_pv_unhalt.patch [bz#1008987]
  - kvm-warn-if-num-cpus-is-greater-than-num-recommended.patch [bz#1010881]
  - kvm-char-move-backends-io-watch-tag-to-CharDriverState.patch [bz#1007222]
  - kvm-char-use-common-function-to-disable-callbacks-on-cha.patch [bz#1007222]
  - kvm-char-remove-watch-callback-on-chardev-detach-from-fr.patch [bz#1007222]
  - kvm-block-don-t-lose-data-from-last-incomplete-sector.patch [bz#1017049]
  - kvm-vmdk-fix-cluster-size-check-for-flat-extents.patch [bz#1017049]
  - kvm-qemu-iotests-add-monolithicFlat-creation-test-to-059.patch [bz#1017049]
  - Resolves: bz#1005036
    (When using “-vga qxl” together with “-display vnc=:5” or “-display  sdl” qemu displays  pixel garbage)
  - Resolves: bz#1007222
    (QEMU core dumped when do hot-unplug virtio serial port during transfer file between host to guest with virtio serial through TCP socket)
  - Resolves: bz#1008987
    (pvticketlocks: add kvm feature kvm_pv_unhalt)
  - Resolves: bz#1010881
    (backport vcpu soft limit warning)
  - Resolves: bz#1017049
    (qemu-img refuses to open the vmdk format image its created)
  - Resolves: bz#923843
    (include userspace iSCSI initiator in block driver whitelist)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-10.el7
changelog:
  - kvm-xhci-fix-endpoint-interval-calculation.patch [bz#1001604]
  - kvm-xhci-emulate-intr-endpoint-intervals-correctly.patch [bz#1001604]
  - kvm-xhci-reset-port-when-disabling-slot.patch [bz#1001604]
  - kvm-Revert-usb-hub-report-status-changes-only-once.patch [bz#1001604]
  - kvm-target-i386-Set-model-6-on-qemu64-qemu32-CPU-models.patch [bz#1004290]
  - kvm-pc-rhel6-doesn-t-have-APIC-on-pentium-CPU-models.patch [bz#918907]
  - kvm-pc-RHEL-6-had-x2apic-set-on-Opteron_G-123.patch [bz#918907]
  - kvm-pc-RHEL-6-don-t-have-RDTSCP.patch [bz#918907]
  - kvm-scsi-Fix-scsi_bus_legacy_add_drive-scsi-generic-with.patch [bz#1009285]
  - kvm-seccomp-fine-tuning-whitelist-by-adding-times.patch [bz#1004175]
  - kvm-block-add-bdrv_write_zeroes.patch [bz#921465]
  - kvm-block-raw-add-bdrv_co_write_zeroes.patch [bz#921465]
  - kvm-rdma-export-qemu_fflush.patch [bz#921465]
  - kvm-block-migration-efficiently-encode-zero-blocks.patch [bz#921465]
  - kvm-Fix-real-mode-guest-migration.patch [bz#921465]
  - kvm-Fix-real-mode-guest-segments-dpl-value-in-savevm.patch [bz#921465]
  - kvm-migration-add-autoconvergence-documentation.patch [bz#921465]
  - kvm-migration-send-total-time-in-QMP-at-completed-stage.patch [bz#921465]
  - kvm-migration-don-t-use-uninitialized-variables.patch [bz#921465]
  - kvm-pc-drop-external-DSDT-loading.patch [bz#921465]
  - kvm-hda-codec-refactor-common-definitions-into-a-header-.patch [bz#954195]
  - kvm-hda-codec-make-mixemu-selectable-at-runtime.patch [bz#954195]
  - kvm-audio-remove-CONFIG_MIXEMU-configure-option.patch [bz#954195]
  - kvm-pc_piix-disable-mixer-for-6.4.0-machine-types-and-be.patch [bz#954195]
  - kvm-spec-mixemu-config-option-is-no-longer-supported-and.patch [bz#954195]
  - Resolves: bz#1001604
    (usb hub doesn't work properly (win7 sees downstream port #1 only).)
  - Resolves: bz#1004175
    ('-sandbox on'  option  cause  qemu-kvm process hang)
  - Resolves: bz#1004290
    (Use model 6 for qemu64 and intel cpus)
  - Resolves: bz#1009285
    (-device usb-storage,serial=... crashes with SCSI generic drive)
  - Resolves: bz#918907
    (provide backwards-compatible RHEL specific machine types in QEMU - CPU features)
  - Resolves: bz#921465
    (Migration can not finished even the "remaining ram" is already 0 kb)
  - Resolves: bz#954195
    (RHEL machines <=6.4 should not use mixemu)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-11.el7
changelog:
  - kvm-chardev-fix-pty_chr_timer.patch [bz#994414]
  - kvm-qemu-socket-zero-initialize-SocketAddress.patch [bz#922010]
  - kvm-qemu-socket-drop-pointless-allocation.patch [bz#922010]
  - kvm-qemu-socket-catch-monitor_get_fd-failures.patch [bz#922010]
  - kvm-qemu-char-check-optional-fields-using-has_.patch [bz#922010]
  - kvm-error-add-error_setg_file_open-helper.patch [bz#922010]
  - kvm-qemu-char-use-more-specific-error_setg_-variants.patch [bz#922010]
  - kvm-qemu-char-print-notification-to-stderr.patch [bz#922010]
  - kvm-qemu-char-fix-documentation-for-telnet-wait-socket-f.patch [bz#922010]
  - kvm-qemu-char-don-t-leak-opts-on-error.patch [bz#922010]
  - kvm-qemu-char-use-ChardevBackendKind-in-CharDriver.patch [bz#922010]
  - kvm-qemu-char-minor-mux-chardev-fixes.patch [bz#922010]
  - kvm-qemu-char-add-chardev-mux-support.patch [bz#922010]
  - kvm-qemu-char-report-udp-backend-errors.patch [bz#922010]
  - kvm-qemu-socket-don-t-leak-opts-on-error.patch [bz#922010]
  - kvm-chardev-handle-qmp_chardev_add-KIND_MUX-failure.patch [bz#922010]
  - kvm-acpi-piix4-Enable-qemu-kvm-compatibility-mode.patch [bz#1019474]
  - kvm-target-i386-support-loading-of-cpu-xsave-subsection.patch [bz#1004743]
  - Resolves: bz#1004743
    (XSAVE migration format not compatible between RHEL6 and RHEL7)
  - Resolves: bz#1019474
    (RHEL-7 can't load piix4_pm migration section from RHEL-6.5)
  - Resolves: bz#922010
    (RFE: support hotplugging chardev & serial ports)
  - Resolves: bz#994414
    (hot-unplug chardev with pty backend caused qemu Segmentation fault)


author: Michal Novotny <minovotn@redhat.com> - 1.5.3-12.el7
changelog:
  - kvm-vl-Clean-up-parsing-of-boot-option-argument.patch [bz#997817]
  - kvm-qemu-option-check_params-is-now-unused-drop-it.patch [bz#997817]
  - kvm-vl-Fix-boot-order-and-once-regressions-and-related-b.patch [bz#997817]
  - kvm-vl-Rename-boot_devices-to-boot_order-for-consistency.patch [bz#997817]
  - kvm-pc-Make-no-fd-bootchk-stick-across-boot-order-change.patch [bz#997817]
  - kvm-doc-Drop-ref-to-Bochs-from-no-fd-bootchk-documentati.patch [bz#997817]
  - kvm-libqtest-Plug-fd-and-memory-leaks-in-qtest_quit.patch [bz#997817]
  - kvm-libqtest-New-qtest_end-to-go-with-qtest_start.patch [bz#997817]
  - kvm-qtest-Don-t-reset-on-qtest-chardev-connect.patch [bz#997817]
  - kvm-boot-order-test-New-covering-just-PC-for-now.patch [bz#997817]
  - kvm-qemu-ga-execute-fsfreeze-freeze-in-reverse-order-of-.patch [bz#1019352]
  - kvm-rbd-link-and-load-librbd-dynamically.patch [bz#989608]
  - kvm-rbd-Only-look-for-qemu-specific-copy-of-librbd.so.1.patch [bz#989608]
  - kvm-spec-Whitelist-rbd-block-driver.patch [bz#989608]
  - Resolves: bz#1019352
    (qemu-guest-agent: "guest-fsfreeze-freeze" deadlocks if the guest have mounted disk images)
  - Resolves: bz#989608
    ([7.0 FEAT] qemu runtime support for librbd backend (ceph))
  - Resolves: bz#997817
    (-boot order and -boot once regressed since RHEL-6)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-13.el7
changelog:
  - kvm-seabios-paravirt-allow-more-than-1TB-in-x86-guest.patch [bz#989677]
  - kvm-scsi-prefer-UUID-to-VM-name-for-the-initiator-name.patch [bz#1006468]
  - kvm-Fix-incorrect-rhel_rhev_conflicts-macro-usage.patch [bz#1017693]
  - Resolves: bz#1006468
    (libiscsi initiator name should use vm UUID)
  - Resolves: bz#1017693
    (incorrect use of rhel_rhev_conflicts)
  - Resolves: bz#989677
    ([HP 7.0 FEAT]: Increase KVM guest supported memory to 4TiB)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-14.el7
changelog:
  - kvm-target-i386-remove-tabs-from-target-i386-cpu.h.patch [bz#928867]
  - kvm-migrate-vPMU-state.patch [bz#928867]
  - kvm-blockdev-do-not-default-cache.no-flush-to-true.patch [bz#1009993]
  - kvm-virtio-blk-do-not-relay-a-previous-driver-s-WCE-conf.patch [bz#1009993]
  - kvm-rng-random-use-error_setg_file_open.patch [bz#907743]
  - kvm-block-mirror_complete-use-error_setg_file_open.patch [bz#907743]
  - kvm-blockdev-use-error_setg_file_open.patch [bz#907743]
  - kvm-cpus-use-error_setg_file_open.patch [bz#907743]
  - kvm-dump-qmp_dump_guest_memory-use-error_setg_file_open.patch [bz#907743]
  - kvm-savevm-qmp_xen_save_devices_state-use-error_setg_fil.patch [bz#907743]
  - kvm-block-bdrv_reopen_prepare-don-t-use-QERR_OPEN_FILE_F.patch [bz#907743]
  - kvm-qerror-drop-QERR_OPEN_FILE_FAILED-macro.patch [bz#907743]
  - kvm-rhel-Drop-ivshmem-device.patch [bz#787463]
  - kvm-usb-remove-old-usb-host-code.patch [bz#1001144]
  - kvm-Add-rhel6-pxe-roms-files.patch [bz#997702]
  - kvm-Add-rhel6-pxe-rom-to-redhat-rpm.patch [bz#997702]
  - kvm-Fix-migration-from-rhel6.5-to-rhel7-with-ipxe.patch [bz#997702]
  - kvm-pc-Don-t-prematurely-explode-QEMUMachineInitArgs.patch [bz#994490]
  - kvm-pc-Don-t-explode-QEMUMachineInitArgs-into-local-vari.patch [bz#994490]
  - kvm-smbios-Normalize-smbios_entry_add-s-error-handling-t.patch [bz#994490]
  - kvm-smbios-Convert-to-QemuOpts.patch [bz#994490]
  - kvm-smbios-Improve-diagnostics-for-conflicting-entries.patch [bz#994490]
  - kvm-smbios-Make-multiple-smbios-type-accumulate-sanely.patch [bz#994490]
  - kvm-smbios-Factor-out-smbios_maybe_add_str.patch [bz#994490]
  - kvm-hw-Pass-QEMUMachine-to-its-init-method.patch [bz#994490]
  - kvm-smbios-Set-system-manufacturer-product-version-by-de.patch [bz#994490]
  - kvm-smbios-Decouple-system-product-from-QEMUMachine.patch [bz#994490]
  - kvm-rhel-SMBIOS-type-1-branding.patch [bz#994490]
  - kvm-Add-disable-rhev-features-option-to-configure.patch []
  - Resolves: bz#1001144
    (Disable or remove device usb-host-linux)
  - Resolves: bz#1009993
    (RHEL7 guests do not issue fdatasyncs on virtio-blk)
  - Resolves: bz#787463
    (disable ivshmem (was: [Hitachi 7.0 FEAT] Support ivshmem (Inter-VM Shared Memory)))
  - Resolves: bz#907743
    (qemu-ga: empty reason string for OpenFileFailed error)
  - Resolves: bz#928867
    (Virtual PMU support during live migration - qemu-kvm)
  - Resolves: bz#994490
    (Set per-machine-type SMBIOS strings)
  - Resolves: bz#997702
    (Migration from RHEL6.5 host to RHEL7.0 host is failed with virtio-net device)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-15.el7
changelog:
  - kvm-cow-make-reads-go-at-a-decent-speed.patch [bz#989646]
  - kvm-cow-make-writes-go-at-a-less-indecent-speed.patch [bz#989646]
  - kvm-cow-do-not-call-bdrv_co_is_allocated.patch [bz#989646]
  - kvm-block-keep-bs-total_sectors-up-to-date-even-for-grow.patch [bz#989646]
  - kvm-block-make-bdrv_co_is_allocated-static.patch [bz#989646]
  - kvm-block-do-not-use-total_sectors-in-bdrv_co_is_allocat.patch [bz#989646]
  - kvm-block-remove-bdrv_is_allocated_above-bdrv_co_is_allo.patch [bz#989646]
  - kvm-block-expect-errors-from-bdrv_co_is_allocated.patch [bz#989646]
  - kvm-block-Fix-compiler-warning-Werror-uninitialized.patch [bz#989646]
  - kvm-qemu-img-always-probe-the-input-image-for-allocated-.patch [bz#989646]
  - kvm-block-make-bdrv_has_zero_init-return-false-for-copy-.patch [bz#989646]
  - kvm-block-introduce-bdrv_get_block_status-API.patch [bz#989646]
  - kvm-block-define-get_block_status-return-value.patch [bz#989646]
  - kvm-block-return-get_block_status-data-and-flags-for-for.patch [bz#989646]
  - kvm-block-use-bdrv_has_zero_init-to-return-BDRV_BLOCK_ZE.patch [bz#989646]
  - kvm-block-return-BDRV_BLOCK_ZERO-past-end-of-backing-fil.patch [bz#989646]
  - kvm-qemu-img-add-a-map-subcommand.patch [bz#989646]
  - kvm-docs-qapi-document-qemu-img-map.patch [bz#989646]
  - kvm-raw-posix-return-get_block_status-data-and-flags.patch [bz#989646]
  - kvm-raw-posix-report-unwritten-extents-as-zero.patch [bz#989646]
  - kvm-block-add-default-get_block_status-implementation-fo.patch [bz#989646]
  - kvm-block-look-for-zero-blocks-in-bs-file.patch [bz#989646]
  - kvm-qemu-img-fix-invalid-JSON.patch [bz#989646]
  - kvm-block-get_block_status-set-pnum-0-on-error.patch [bz#989646]
  - kvm-block-get_block_status-avoid-segfault-if-there-is-no.patch [bz#989646]
  - kvm-block-get_block_status-avoid-redundant-callouts-on-r.patch [bz#989646]
  - kvm-qcow2-Restore-total_sectors-value-in-save_vmstate.patch [bz#1025740]
  - kvm-qcow2-Unset-zero_beyond_eof-in-save_vmstate.patch [bz#1025740]
  - kvm-qemu-iotests-Test-for-loading-VM-state-from-qcow2.patch [bz#1025740]
  - kvm-apic-rename-apic-specific-bitopts.patch [bz#1001216]
  - kvm-hw-import-bitmap-operations-in-qdev-core-header.patch [bz#1001216]
  - kvm-qemu-help-Sort-devices-by-logical-functionality.patch [bz#1001216]
  - kvm-devices-Associate-devices-to-their-logical-category.patch [bz#1001216]
  - kvm-Mostly-revert-qemu-help-Sort-devices-by-logical-func.patch [bz#1001216]
  - kvm-qdev-monitor-Group-device_add-help-and-info-qdm-by-c.patch [bz#1001216]
  - kvm-qdev-Replace-no_user-by-cannot_instantiate_with_devi.patch [bz#1001216]
  - kvm-sysbus-Set-cannot_instantiate_with_device_add_yet.patch [bz#1001216]
  - kvm-cpu-Document-why-cannot_instantiate_with_device_add_.patch [bz#1001216]
  - kvm-apic-Document-why-cannot_instantiate_with_device_add.patch [bz#1001216]
  - kvm-pci-host-Consistently-set-cannot_instantiate_with_de.patch [bz#1001216]
  - kvm-ich9-Document-why-cannot_instantiate_with_device_add.patch [bz#1001216]
  - kvm-piix3-piix4-Clean-up-use-of-cannot_instantiate_with_.patch [bz#1001216]
  - kvm-vt82c686-Clean-up-use-of-cannot_instantiate_with_dev.patch [bz#1001216]
  - kvm-isa-Clean-up-use-of-cannot_instantiate_with_device_a.patch [bz#1001216]
  - kvm-qdev-Do-not-let-the-user-try-to-device_add-when-it-c.patch [bz#1001216]
  - kvm-rhel-Revert-unwanted-cannot_instantiate_with_device_.patch [bz#1001216]
  - kvm-rhel-Revert-downstream-changes-to-unused-default-con.patch [bz#1001076]
  - kvm-rhel-Drop-cfi.pflash01-and-isa-ide-device.patch [bz#1001076]
  - kvm-rhel-Drop-isa-vga-device.patch [bz#1001088]
  - kvm-rhel-Make-isa-cirrus-vga-device-unavailable.patch [bz#1001088]
  - kvm-rhel-Make-ccid-card-emulated-device-unavailable.patch [bz#1001123]
  - kvm-x86-fix-migration-from-pre-version-12.patch [bz#1005695]
  - kvm-x86-cpuid-reconstruct-leaf-0Dh-data.patch [bz#1005695]
  - kvm-kvmvapic-Catch-invalid-ROM-size.patch [bz#920021]
  - kvm-kvmvapic-Enter-inactive-state-on-hardware-reset.patch [bz#920021]
  - kvm-kvmvapic-Clear-also-physical-ROM-address-when-enteri.patch [bz#920021]
  - kvm-block-optionally-disable-live-block-jobs.patch [bz#987582]
  - kvm-rpm-spec-template-disable-live-block-ops-for-rhel-en.patch [bz#987582]
  - kvm-migration-disable-live-block-migration-b-i-for-rhel-.patch [bz#1022392]
  - kvm-Build-ceph-rbd-only-for-rhev.patch [bz#987583]
  - kvm-spec-Disable-host-cdrom-RHEL-only.patch [bz#760885]
  - kvm-rhel-Make-pci-serial-2x-and-pci-serial-4x-device-una.patch [bz#1001180]
  - kvm-usb-host-libusb-Fix-reset-handling.patch [bz#980415]
  - kvm-usb-host-libusb-Configuration-0-may-be-a-valid-confi.patch [bz#980383]
  - kvm-usb-host-libusb-Detach-kernel-drivers-earlier.patch [bz#980383]
  - kvm-monitor-Remove-pci_add-command-for-Red-Hat-Enterpris.patch [bz#1010858]
  - kvm-monitor-Remove-pci_del-command-for-Red-Hat-Enterpris.patch [bz#1010858]
  - kvm-monitor-Remove-usb_add-del-commands-for-Red-Hat-Ente.patch [bz#1010858]
  - kvm-monitor-Remove-host_net_add-remove-for-Red-Hat-Enter.patch [bz#1010858]
  - kvm-fw_cfg-add-API-to-find-FW-cfg-object.patch [bz#990601]
  - kvm-pvpanic-use-FWCfgState-explicitly.patch [bz#990601]
  - kvm-pvpanic-initialization-cleanup.patch [bz#990601]
  - kvm-pvpanic-fix-fwcfg-for-big-endian-hosts.patch [bz#990601]
  - kvm-hw-misc-make-pvpanic-known-to-user.patch [bz#990601]
  - kvm-gdbstub-do-not-restart-crashed-guest.patch [bz#990601]
  - kvm-gdbstub-fix-for-commit-87f25c12bfeaaa0c41fb857713bbc.patch [bz#990601]
  - kvm-vl-allow-cont-from-panicked-state.patch [bz#990601]
  - kvm-hw-misc-don-t-create-pvpanic-device-by-default.patch [bz#990601]
  - kvm-block-vhdx-add-migration-blocker.patch [bz#1007176]
  - kvm-qemu-kvm.spec-add-vhdx-to-the-read-only-block-driver.patch [bz#1007176]
  - kvm-qemu-kvm.spec-Add-VPC-VHD-driver-to-the-block-read-o.patch [bz#1007176]
  - Resolves: bz#1001076
    (Disable or remove other block devices we won't support)
  - Resolves: bz#1001088
    (Disable or remove display devices we won't support)
  - Resolves: bz#1001123
    (Disable or remove device ccid-card-emulated)
  - Resolves: bz#1001180
    (Disable or remove devices pci-serial-2x, pci-serial-4x)
  - Resolves: bz#1001216
    (Fix no_user or provide another way make devices unavailable with -device / device_add)
  - Resolves: bz#1005695
    (QEMU should hide CPUID.0Dh values that it does not support)
  - Resolves: bz#1007176
    (Add VPC and VHDX file formats as supported in qemu-kvm (read-only))
  - Resolves: bz#1010858
    (Disable unused human monitor commands)
  - Resolves: bz#1022392
    (Disable live-storage-migration in qemu-kvm (migrate -b/-i))
  - Resolves: bz#1025740
    (Saving VM state on qcow2 images results in VM state corruption)
  - Resolves: bz#760885
    (Disable host cdrom passthrough)
  - Resolves: bz#920021
    (qemu-kvm segment fault when reboot guest after hot unplug device with option ROM)
  - Resolves: bz#980383
    (The usb3.0 stick can't be returned back to host after shutdown guest with usb3.0 pass-through)
  - Resolves: bz#980415
    (libusbx: error [_open_sysfs_attr] open /sys/bus/usb/devices/4-1/bConfigurationValue failed ret=-1 errno=2)
  - Resolves: bz#987582
    (Initial Virtualization Differentiation for RHEL7 (Live snapshots))
  - Resolves: bz#987583
    (Initial Virtualization Differentiation for RHEL7 (Ceph enablement))
  - Resolves: bz#989646
    (Support backup vendors in qemu to access qcow disk readonly)
  - Resolves: bz#990601
    (pvpanic device triggers guest bugs when present by default)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-16.el7
changelog:
  - kvm-block-drop-bs_snapshots-global-variable.patch [bz#1026524]
  - kvm-block-move-snapshot-code-in-block.c-to-block-snapsho.patch [bz#1026524]
  - kvm-block-fix-vvfat-error-path-for-enable_write_target.patch [bz#1026524]
  - kvm-block-Bugfix-format-and-snapshot-used-in-drive-optio.patch [bz#1026524]
  - kvm-iscsi-use-bdrv_new-instead-of-stack-structure.patch [bz#1026524]
  - kvm-qcow2-Add-corrupt-bit.patch [bz#1004347]
  - kvm-qcow2-Metadata-overlap-checks.patch [bz#1004347]
  - kvm-qcow2-Employ-metadata-overlap-checks.patch [bz#1004347]
  - kvm-qcow2-refcount-Move-OFLAG_COPIED-checks.patch [bz#1004347]
  - kvm-qcow2-refcount-Repair-OFLAG_COPIED-errors.patch [bz#1004347]
  - kvm-qcow2-refcount-Repair-shared-refcount-blocks.patch [bz#1004347]
  - kvm-qcow2_check-Mark-image-consistent.patch [bz#1004347]
  - kvm-qemu-iotests-Overlapping-cluster-allocations.patch [bz#1004347]
  - kvm-w32-Fix-access-to-host-devices-regression.patch [bz#1026524]
  - kvm-add-qemu-img-convert-n-option-skip-target-volume-cre.patch [bz#1026524]
  - kvm-bdrv-Use-Error-for-opening-images.patch [bz#1026524]
  - kvm-bdrv-Use-Error-for-creating-images.patch [bz#1026524]
  - kvm-block-Error-parameter-for-open-functions.patch [bz#1026524]
  - kvm-block-Error-parameter-for-create-functions.patch [bz#1026524]
  - kvm-qemu-img-create-Emit-filename-on-error.patch [bz#1026524]
  - kvm-qcow2-Use-Error-parameter.patch [bz#1026524]
  - kvm-qemu-iotests-Adjustments-due-to-error-propagation.patch [bz#1026524]
  - kvm-block-raw-Employ-error-parameter.patch [bz#1026524]
  - kvm-block-raw-win32-Employ-error-parameter.patch [bz#1026524]
  - kvm-blkdebug-Employ-error-parameter.patch [bz#1026524]
  - kvm-blkverify-Employ-error-parameter.patch [bz#1026524]
  - kvm-block-raw-posix-Employ-error-parameter.patch [bz#1026524]
  - kvm-block-raw-win32-Always-use-errno-in-hdev_open.patch [bz#1026524]
  - kvm-qmp-Documentation-for-BLOCK_IMAGE_CORRUPTED.patch [bz#1004347]
  - kvm-qcow2-Correct-snapshots-size-for-overlap-check.patch [bz#1004347]
  - kvm-qcow2-CHECK_OFLAG_COPIED-is-obsolete.patch [bz#1004347]
  - kvm-qcow2-Correct-endianness-in-overlap-check.patch [bz#1004347]
  - kvm-qcow2-Switch-L1-table-in-a-single-sequence.patch [bz#1004347]
  - kvm-qcow2-Use-pread-for-inactive-L1-in-overlap-check.patch [bz#1004347]
  - kvm-qcow2-Remove-wrong-metadata-overlap-check.patch [bz#1004347]
  - kvm-qcow2-Use-negated-overflow-check-mask.patch [bz#1004347]
  - kvm-qcow2-Make-overlap-check-mask-variable.patch [bz#1004347]
  - kvm-qcow2-Add-overlap-check-options.patch [bz#1004347]
  - kvm-qcow2-Array-assigning-options-to-OL-check-bits.patch [bz#1004347]
  - kvm-qcow2-Add-more-overlap-check-bitmask-macros.patch [bz#1004347]
  - kvm-qcow2-Evaluate-overlap-check-options.patch [bz#1004347]
  - kvm-qapi-types.py-Split-off-generate_struct_fields.patch [bz#978402]
  - kvm-qapi-types.py-Fix-enum-struct-sizes-on-i686.patch [bz#978402]
  - kvm-qapi-types-visit.py-Pass-whole-expr-dict-for-structs.patch [bz#978402]
  - kvm-qapi-types-visit.py-Inheritance-for-structs.patch [bz#978402]
  - kvm-blockdev-Introduce-DriveInfo.enable_auto_del.patch [bz#978402]
  - kvm-Implement-qdict_flatten.patch [bz#978402]
  - kvm-blockdev-blockdev-add-QMP-command.patch [bz#978402]
  - kvm-blockdev-Separate-ID-generation-from-DriveInfo-creat.patch [bz#978402]
  - kvm-blockdev-Pass-QDict-to-blockdev_init.patch [bz#978402]
  - kvm-blockdev-Move-parsing-of-media-option-to-drive_init.patch [bz#978402]
  - kvm-blockdev-Move-parsing-of-if-option-to-drive_init.patch [bz#978402]
  - kvm-blockdev-Moving-parsing-of-geometry-options-to-drive.patch [bz#978402]
  - kvm-blockdev-Move-parsing-of-boot-option-to-drive_init.patch [bz#978402]
  - kvm-blockdev-Move-bus-unit-index-processing-to-drive_ini.patch [bz#978402]
  - kvm-blockdev-Move-virtio-blk-device-creation-to-drive_in.patch [bz#978402]
  - kvm-blockdev-Remove-IF_-check-for-read-only-blockdev_ini.patch [bz#978402]
  - kvm-qemu-iotests-Check-autodel-behaviour-for-device_del.patch [bz#978402]
  - kvm-blockdev-Remove-media-parameter-from-blockdev_init.patch [bz#978402]
  - kvm-blockdev-Don-t-disable-COR-automatically-with-blockd.patch [bz#978402]
  - kvm-blockdev-blockdev_init-error-conversion.patch [bz#978402]
  - kvm-sd-Avoid-access-to-NULL-BlockDriverState.patch [bz#978402]
  - kvm-blockdev-fix-cdrom-read_only-flag.patch [bz#978402]
  - kvm-block-fix-backing-file-overriding.patch [bz#978402]
  - kvm-block-Disable-BDRV_O_COPY_ON_READ-for-the-backing-fi.patch [bz#978402]
  - kvm-block-Don-t-copy-backing-file-name-on-error.patch [bz#978402]
  - kvm-qemu-iotests-Try-creating-huge-qcow2-image.patch [bz#980771]
  - kvm-block-move-qmp-and-info-dump-related-code-to-block-q.patch [bz#980771]
  - kvm-block-dump-snapshot-and-image-info-to-specified-outp.patch [bz#980771]
  - kvm-block-add-snapshot-info-query-function-bdrv_query_sn.patch [bz#980771]
  - kvm-block-add-image-info-query-function-bdrv_query_image.patch [bz#980771]
  - kvm-qmp-add-ImageInfo-in-BlockDeviceInfo-used-by-query-b.patch [bz#980771]
  - kvm-vmdk-Implement-.bdrv_has_zero_init.patch [bz#980771]
  - kvm-qemu-iotests-Add-basic-ability-to-use-binary-sample-.patch [bz#980771]
  - kvm-qemu-iotests-Quote-TEST_IMG-and-TEST_DIR-usage.patch [bz#980771]
  - kvm-qemu-iotests-fix-test-case-059.patch [bz#980771]
  - kvm-qapi-Add-ImageInfoSpecific-type.patch [bz#980771]
  - kvm-block-Add-bdrv_get_specific_info.patch [bz#980771]
  - kvm-block-qapi-Human-readable-ImageInfoSpecific-dump.patch [bz#980771]
  - kvm-qcow2-Add-support-for-ImageInfoSpecific.patch [bz#980771]
  - kvm-qemu-iotests-Discard-specific-info-in-_img_info.patch [bz#980771]
  - kvm-qemu-iotests-Additional-info-from-qemu-img-info.patch [bz#980771]
  - kvm-vmdk-convert-error-code-to-use-errp.patch [bz#980771]
  - kvm-vmdk-refuse-enabling-zeroed-grain-with-flat-images.patch [bz#980771]
  - kvm-qapi-Add-optional-field-compressed-to-ImageInfo.patch [bz#980771]
  - kvm-vmdk-Only-read-cid-from-image-file-when-opening.patch [bz#980771]
  - kvm-vmdk-Implment-bdrv_get_specific_info.patch [bz#980771]
  - Resolves: bz#1004347
    (Backport qcow2 corruption prevention patches)
  - Resolves: bz#1026524
    (Backport block layer error parameter patches)
  - Resolves: bz#978402
    ([RFE] Add discard support to qemu-kvm layer)
  - Resolves: bz#980771
    ([RFE]  qemu-img should be able to tell the compat version of a qcow2 image)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-17.el7
changelog:
  - kvm-pci-assign-Add-MSI-affinity-support.patch [bz#1025877]
  - kvm-Fix-potential-resource-leak-missing-fclose.patch [bz#1025877]
  - kvm-pci-assign-remove-the-duplicate-function-name-in-deb.patch [bz#1025877]
  - kvm-Remove-s390-ccw-img-loader.patch [bz#1017682]
  - kvm-Fix-vscclient-installation.patch [bz#1017681]
  - kvm-Change-qemu-bridge-helper-permissions-to-4755.patch [bz#1017689]
  - kvm-net-update-nic-info-during-device-reset.patch [bz#922589]
  - kvm-net-e1000-update-network-information-when-macaddr-is.patch [bz#922589]
  - kvm-net-rtl8139-update-network-information-when-macaddr-.patch [bz#922589]
  - kvm-virtio-net-fix-up-HMP-NIC-info-string-on-reset.patch [bz#1026689]
  - kvm-vfio-pci-VGA-quirk-update.patch [bz#1025477]
  - kvm-vfio-pci-Add-support-for-MSI-affinity.patch [bz#1025477]
  - kvm-vfio-pci-Test-device-reset-capabilities.patch [bz#1026550]
  - kvm-vfio-pci-Lazy-PCI-option-ROM-loading.patch [bz#1026550]
  - kvm-vfio-pci-Cleanup-error_reports.patch [bz#1026550]
  - kvm-vfio-pci-Add-dummy-PCI-ROM-write-accessor.patch [bz#1026550]
  - kvm-vfio-pci-Fix-endian-issues-in-vfio_pci_size_rom.patch [bz#1026550]
  - kvm-linux-headers-Update-to-include-vfio-pci-hot-reset-s.patch [bz#1025472]
  - kvm-vfio-pci-Implement-PCI-hot-reset.patch [bz#1025472]
  - kvm-linux-headers-Update-for-KVM-VFIO-device.patch [bz#1025474]
  - kvm-vfio-pci-Make-use-of-new-KVM-VFIO-device.patch [bz#1025474]
  - kvm-vmdk-Fix-vmdk_parse_extents.patch [bz#995866]
  - kvm-vmdk-fix-VMFS-extent-parsing.patch [bz#995866]
  - kvm-e1000-rtl8139-update-HMP-NIC-when-every-bit-is-writt.patch [bz#922589]
  - kvm-don-t-disable-ctrl_mac_addr-feature-for-6.5-machine-.patch [bz#1005039]
  - Resolves: bz#1005039
    (add compat property to disable ctrl_mac_addr feature)
  - Resolves: bz#1017681
    (rpmdiff test "Multilib regressions": vscclient is a libtool script on s390/s390x/ppc/ppc64)
  - Resolves: bz#1017682
    (/usr/share/qemu-kvm/s390-ccw.img need not be distributed)
  - Resolves: bz#1017689
    (/usr/libexec/qemu-bridge-helper permissions should be 4755)
  - Resolves: bz#1025472
    (Nvidia GPU device assignment - qemu-kvm - bus reset support)
  - Resolves: bz#1025474
    (Nvidia GPU device assignment - qemu-kvm - NoSnoop support)
  - Resolves: bz#1025477
    (VFIO MSI affinity)
  - Resolves: bz#1025877
    (pci-assign lacks MSI affinity support)
  - Resolves: bz#1026550
    (QEMU VFIO update ROM loading code)
  - Resolves: bz#1026689
    (virtio-net: macaddr is reset but network info of monitor isn't updated)
  - Resolves: bz#922589
    (e1000/rtl8139: qemu mac address can not be changed via set the hardware address in guest)
  - Resolves: bz#995866
    (fix vmdk support to ESX images)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-19.el7
changelog:
  - kvm-qapi-qapi-visit.py-fix-list-handling-for-union-types.patch [bz#848203]
  - kvm-qapi-qapi-visit.py-native-list-support.patch [bz#848203]
  - kvm-qapi-enable-generation-of-native-list-code.patch [bz#848203]
  - kvm-net-add-support-of-mac-programming-over-macvtap-in-Q.patch [bz#848203]
  - Resolves: bz#848203
    (MAC Programming for virtio over macvtap - qemu-kvm support)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-20.el7
changelog:
  - kvm-pc-drop-virtio-balloon-pci-event_idx-compat-property.patch [bz#1029539]
  - kvm-virtio-net-only-delete-bh-that-existed.patch [bz#922463]
  - kvm-virtio-net-broken-RX-filtering-logic-fixed.patch [bz#1029370]
  - kvm-block-Avoid-unecessary-drv-bdrv_getlength-calls.patch [bz#1025138]
  - kvm-block-Round-up-total_sectors.patch [bz#1025138]
  - kvm-doc-fix-hardcoded-helper-path.patch [bz#1016952]
  - kvm-introduce-RFQDN_REDHAT-RHEL-6-7-fwd.patch [bz#971933]
  - kvm-error-reason-in-BLOCK_IO_ERROR-BLOCK_JOB_ERROR-event.patch [bz#971938]
  - kvm-improve-debuggability-of-BLOCK_IO_ERROR-BLOCK_JOB_ER.patch [bz#895041]
  - kvm-vfio-pci-Fix-multifunction-on.patch [bz#1029275]
  - kvm-qcow2-Change-default-for-new-images-to-compat-1.1.patch [bz#1026739]
  - kvm-qcow2-change-default-for-new-images-to-compat-1.1-pa.patch [bz#1026739]
  - kvm-rng-egd-offset-the-point-when-repeatedly-read-from-t.patch [bz#1032862]
  - kvm-Fix-rhel-rhev-conflict-for-qemu-kvm-common.patch [bz#1033463]
  - Resolves: bz#1016952
    (qemu-kvm man page guide wrong path for qemu-bridge-helper)
  - Resolves: bz#1025138
    (Read/Randread/Randrw performance regression)
  - Resolves: bz#1026739
    (qcow2: Switch to compat=1.1 default for new images)
  - Resolves: bz#1029275
    (Guest only find one 82576 VF(function 0) while use multifunction)
  - Resolves: bz#1029370
    ([whql][netkvm][wlk] Virtio-net device handles RX multicast filtering improperly)
  - Resolves: bz#1029539
    (Machine type rhel6.1.0 and  balloon device cause migration fail from RHEL6.5 host to RHEL7.0 host)
  - Resolves: bz#1032862
    (virtio-rng-egd: repeatedly read same random data-block w/o considering the buffer offset)
  - Resolves: bz#1033463
    (can not upgrade qemu-kvm-common to qemu-kvm-common-rhev due to conflicts)
  - Resolves: bz#895041
    (QMP: forward port I/O error debug messages)
  - Resolves: bz#922463
    (qemu-kvm core dump when virtio-net multi queue guest hot-unpluging vNIC)
  - Resolves: bz#971933
    (QMP: add RHEL's vendor extension prefix)
  - Resolves: bz#971938
    (QMP: Add error reason to BLOCK_IO_ERROR event)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-21.el7
changelog:
  - kvm-scsi-Allocate-SCSITargetReq-r-buf-dynamically-CVE-20.patch [bz#1007334]
  - Resolves: bz#1007334
    (CVE-2013-4344 qemu-kvm: qemu: buffer overflow in scsi_target_emulate_report_luns [rhel-7.0])


author: Michal Novotny <minovotn@redhat.com> - 1.5.3-22.el7
changelog:
  - Fix ksmtuned with set_process_name=1 [bz#1027420]
  - Fix committed memory when no qemu-kvm running [bz#1027418]
  - kvm-virtio-net-fix-the-memory-leak-in-rxfilter_notify.patch [bz#1033810]
  - kvm-qom-Fix-memory-leak-in-object_property_set_link.patch [bz#1033810]
  - kvm-fix-intel-hda-live-migration.patch [bz#1036537]
  - kvm-vfio-pci-Release-all-MSI-X-vectors-when-disabled.patch [bz#1029743]
  - kvm-Query-KVM-for-available-memory-slots.patch [bz#921490]
  - kvm-block-Dont-ignore-previously-set-bdrv_flags.patch [bz#1039501]
  - kvm-cleanup-trace-events.pl-New.patch [bz#997832]
  - kvm-slavio_misc-Fix-slavio_led_mem_readw-_writew-tracepo.patch [bz#997832]
  - kvm-milkymist-minimac2-Fix-minimac2_read-_write-tracepoi.patch [bz#997832]
  - kvm-trace-events-Drop-unused-events.patch [bz#997832]
  - kvm-trace-events-Fix-up-source-file-comments.patch [bz#997832]
  - kvm-trace-events-Clean-up-with-scripts-cleanup-trace-eve.patch [bz#997832]
  - kvm-trace-events-Clean-up-after-removal-of-old-usb-host-.patch [bz#997832]
  - kvm-net-Update-netdev-peer-on-link-change.patch [bz#1027571]
  - Resolves: bz#1027418
    (ksmtuned committed_memory() still returns "", not 0, when no qemu running)
  - Resolves: bz#1027420
    (ksmtuned can’t handle libvirt WITH set_process_name=1)
  - Resolves: bz#1027571
    ([virtio-win]win8.1 guest network can not resume automatically after do "set_link tap1 on")
  - Resolves: bz#1029743
    (qemu-kvm core dump after hot plug/unplug 82576 PF about 100 times)
  - Resolves: bz#1033810
    (memory leak in using object_get_canonical_path())
  - Resolves: bz#1036537
    (Cross version migration from RHEL6.5 host to RHEL7.0 host with sound device failed.)
  - Resolves: bz#1039501
    ([provisioning] discard=on broken)
  - Resolves: bz#921490
    (qemu-kvm core dumped after hot plugging more than 11 VF through vfio-pci)
  - Resolves: bz#997832
    (Backport trace fixes proactively to avoid confusion and silly conflicts)


author: Michal Novotny <minovotn@redhat.com> - 1.5.3-23.el7
changelog:
  - kvm-qdev-monitor-Unref-device-when-device_add-fails.patch [bz#1003773]
  - kvm-qdev-Drop-misleading-qdev_free-function.patch [bz#1003773]
  - kvm-blockdev-fix-drive_init-opts-and-bs_opts-leaks.patch [bz#1003773]
  - kvm-libqtest-rename-qmp-to-qmp_discard_response.patch [bz#1003773]
  - kvm-libqtest-add-qmp-fmt-.-QDict-function.patch [bz#1003773]
  - kvm-blockdev-test-add-test-case-for-drive_add-duplicate-.patch [bz#1003773]
  - kvm-qdev-monitor-test-add-device_add-leak-test-cases.patch [bz#1003773]
  - kvm-qtest-Use-display-none-by-default.patch [bz#1003773]
  - Resolves: bz#1003773
    (When virtio-blk-pci device with dataplane is failed to be added, the drive cannot be released.)


author: Michal Novotny <minovotn@redhat.com> - 1.5.3-24.el7
changelog:
  - kvm-range-add-Range-structure.patch [bz#1034876]
  - kvm-range-add-Range-to-typedefs.patch [bz#1034876]
  - kvm-range-add-min-max-operations-on-ranges.patch [bz#1034876]
  - kvm-qdev-Add-SIZE-type-to-qdev-properties.patch [bz#1034876]
  - kvm-qapi-make-visit_type_size-fallback-to-type_int.patch [bz#1034876]
  - kvm-pc-move-IO_APIC_DEFAULT_ADDRESS-to-include-hw-i386-i.patch [bz#1034876]
  - kvm-pci-add-helper-to-retrieve-the-64-bit-range.patch [bz#1034876]
  - kvm-pci-fix-up-w64-size-calculation-helper.patch [bz#1034876]
  - kvm-refer-to-FWCfgState-explicitly.patch [bz#1034876]
  - kvm-fw_cfg-move-typedef-to-qemu-typedefs.h.patch [bz#1034876]
  - kvm-arch_init-align-MR-size-to-target-page-size.patch [bz#1034876]
  - kvm-loader-store-FW-CFG-ROM-files-in-RAM.patch [bz#1034876]
  - kvm-pci-store-PCI-hole-ranges-in-guestinfo-structure.patch [bz#1034876]
  - kvm-pc-pass-PCI-hole-ranges-to-Guests.patch [bz#1034876]
  - kvm-pc-replace-i440fx_common_init-with-i440fx_init.patch [bz#1034876]
  - kvm-pc-don-t-access-fw-cfg-if-NULL.patch [bz#1034876]
  - kvm-pc-add-I440FX-QOM-cast-macro.patch [bz#1034876]
  - kvm-pc-limit-64-bit-hole-to-2G-by-default.patch [bz#1034876]
  - kvm-q35-make-pci-window-address-size-match-guest-cfg.patch [bz#1034876]
  - kvm-q35-use-64-bit-window-programmed-by-guest.patch [bz#1034876]
  - kvm-piix-use-64-bit-window-programmed-by-guest.patch [bz#1034876]
  - kvm-pc-fix-regression-for-64-bit-PCI-memory.patch [bz#1034876]
  - kvm-cleanup-object.h-include-error.h-directly.patch [bz#1034876]
  - kvm-qom-cleanup-struct-Error-references.patch [bz#1034876]
  - kvm-qom-add-pointer-to-int-property-helpers.patch [bz#1034876]
  - kvm-fw_cfg-interface-to-trigger-callback-on-read.patch [bz#1034876]
  - kvm-loader-support-for-unmapped-ROM-blobs.patch [bz#1034876]
  - kvm-pcie_host-expose-UNMAPPED-macro.patch [bz#1034876]
  - kvm-pcie_host-expose-address-format.patch [bz#1034876]
  - kvm-q35-use-macro-for-MCFG-property-name.patch [bz#1034876]
  - kvm-q35-expose-mmcfg-size-as-a-property.patch [bz#1034876]
  - kvm-i386-add-ACPI-table-files-from-seabios.patch [bz#1034876]
  - kvm-acpi-add-rules-to-compile-ASL-source.patch [bz#1034876]
  - kvm-acpi-pre-compiled-ASL-files.patch [bz#1034876]
  - kvm-acpi-ssdt-pcihp-updat-generated-file.patch [bz#1034876]
  - kvm-loader-use-file-path-size-from-fw_cfg.h.patch [bz#1034876]
  - kvm-i386-add-bios-linker-loader.patch [bz#1034876]
  - kvm-loader-allow-adding-ROMs-in-done-callbacks.patch [bz#1034876]
  - kvm-i386-define-pc-guest-info.patch [bz#1034876]
  - kvm-acpi-piix-add-macros-for-acpi-property-names.patch [bz#1034876]
  - kvm-piix-APIs-for-pc-guest-info.patch [bz#1034876]
  - kvm-ich9-APIs-for-pc-guest-info.patch [bz#1034876]
  - kvm-pvpanic-add-API-to-access-io-port.patch [bz#1034876]
  - kvm-hpet-add-API-to-find-it.patch [bz#1034876]
  - kvm-hpet-fix-build-with-CONFIG_HPET-off.patch [bz#1034876]
  - kvm-acpi-add-interface-to-access-user-installed-tables.patch [bz#1034876]
  - kvm-pc-use-new-api-to-add-builtin-tables.patch [bz#1034876]
  - kvm-i386-ACPI-table-generation-code-from-seabios.patch [bz#1034876]
  - kvm-ssdt-fix-PBLK-length.patch [bz#1034876]
  - kvm-ssdt-proc-update-generated-file.patch [bz#1034876]
  - kvm-pc-disable-pci-info.patch [bz#1034876]
  - kvm-acpi-build-fix-build-on-glib-2.22.patch [bz#1034876]
  - kvm-acpi-build-fix-build-on-glib-2.14.patch [bz#1034876]
  - kvm-acpi-build-fix-support-for-glib-2.22.patch [bz#1034876]
  - kvm-acpi-build-Fix-compiler-warning-missing-gnu_printf-f.patch [bz#1034876]
  - kvm-exec-Fix-prototype-of-phys_mem_set_alloc-and-related.patch [bz#1034876]
  - Resolves: bz#1034876
    (export acpi tables to guests)


author: Michal Novotny <minovotn@redhat.com> - 1.5.3-25.el7
changelog:
  - kvm-Change-package-description.patch [bz#1017696]
  - kvm-seccomp-add-kill-to-the-syscall-whitelist.patch [bz#1026314]
  - kvm-json-parser-fix-handling-of-large-whole-number-value.patch [bz#997915]
  - kvm-qapi-add-QMP-input-test-for-large-integers.patch [bz#997915]
  - kvm-qapi-fix-visitor-serialization-tests-for-numbers-dou.patch [bz#997915]
  - kvm-qapi-add-native-list-coverage-for-visitor-serializat.patch [bz#997915]
  - kvm-qapi-add-native-list-coverage-for-QMP-output-visitor.patch [bz#997915]
  - kvm-qapi-add-native-list-coverage-for-QMP-input-visitor-.patch [bz#997915]
  - kvm-qapi-lack-of-two-commas-in-dict.patch [bz#997915]
  - kvm-tests-QAPI-schema-parser-tests.patch [bz#997915]
  - kvm-tests-Use-qapi-schema-test.json-as-schema-parser-tes.patch [bz#997915]
  - kvm-qapi.py-Restructure-lexer-and-parser.patch [bz#997915]
  - kvm-qapi.py-Decent-syntax-error-reporting.patch [bz#997915]
  - kvm-qapi.py-Reject-invalid-characters-in-schema-file.patch [bz#997915]
  - kvm-qapi.py-Fix-schema-parser-to-check-syntax-systematic.patch [bz#997915]
  - kvm-qapi.py-Fix-diagnosing-non-objects-at-a-schema-s-top.patch [bz#997915]
  - kvm-qapi.py-Rename-expr_eval-to-expr-in-parse_schema.patch [bz#997915]
  - kvm-qapi.py-Permit-comments-starting-anywhere-on-the-lin.patch [bz#997915]
  - kvm-scripts-qapi.py-Avoid-syntax-not-supported-by-Python.patch [bz#997915]
  - kvm-tests-Fix-schema-parser-test-for-in-tree-build.patch [bz#997915]
  - Resolves: bz#1017696
    ([branding] remove references to dynamic translation and user-mode emulation)
  - Resolves: bz#1026314
    (qemu-kvm hang when use '-sandbox on'+'vnc'+'hda')
  - Resolves: bz#997915
    (Backport new QAPI parser proactively to help developers and avoid silly conflicts)


author: Michal Novotny <minovotn@redhat.com> - 1.5.3-26.el7
changelog:
  - Add BuildRequires to libRDMAcm-devel for RDMA support [bz#1011720]
  - kvm-add-a-header-file-for-atomic-operations.patch [bz#1011720]
  - kvm-savevm-Fix-potential-memory-leak.patch [bz#1011720]
  - kvm-migration-Fail-migration-on-bdrv_flush_all-error.patch [bz#1011720]
  - kvm-rdma-add-documentation.patch [bz#1011720]
  - kvm-rdma-introduce-qemu_update_position.patch [bz#1011720]
  - kvm-rdma-export-yield_until_fd_readable.patch [bz#1011720]
  - kvm-rdma-export-throughput-w-MigrationStats-QMP.patch [bz#1011720]
  - kvm-rdma-introduce-qemu_file_mode_is_not_valid.patch [bz#1011720]
  - kvm-rdma-introduce-qemu_ram_foreach_block.patch [bz#1011720]
  - kvm-rdma-new-QEMUFileOps-hooks.patch [bz#1011720]
  - kvm-rdma-introduce-capability-x-rdma-pin-all.patch [bz#1011720]
  - kvm-rdma-update-documentation-to-reflect-new-unpin-suppo.patch [bz#1011720]- kvm-rdma-bugfix-ram_control_save_page.patch [bz#1011720]
  - kvm-rdma-introduce-ram_handle_compressed.patch [bz#1011720]
  - kvm-rdma-core-logic.patch [bz#1011720]
  - kvm-rdma-send-pc.ram.patch [bz#1011720]
  - kvm-rdma-allow-state-transitions-between-other-states-be.patch [bz#1011720]
  - kvm-rdma-introduce-MIG_STATE_NONE-and-change-MIG_STATE_S.patch [bz#1011720]
  - kvm-rdma-account-for-the-time-spent-in-MIG_STATE_SETUP-t.patch [bz#1011720]
  - kvm-rdma-bugfix-make-IPv6-support-work.patch [bz#1011720]
  - kvm-rdma-forgot-to-turn-off-the-debugging-flag.patch [bz#1011720]
  - kvm-rdma-correct-newlines-in-error-statements.patch [bz#1011720]
  - kvm-rdma-don-t-use-negative-index-to-array.patch [bz#1011720]
  - kvm-rdma-qemu_rdma_post_send_control-uses-wrongly-RDMA_W.patch [bz#1011720]
  - kvm-rdma-use-DRMA_WRID_READY.patch [bz#1011720]
  - kvm-rdma-memory-leak-RDMAContext-host.patch [bz#1011720]
  - kvm-rdma-use-resp.len-after-validation-in-qemu_rdma_regi.patch [bz#1011720]
  - kvm-rdma-validate-RDMAControlHeader-len.patch [bz#1011720]
  - kvm-rdma-check-if-RDMAControlHeader-len-match-transferre.patch [bz#1011720]
  - kvm-rdma-proper-getaddrinfo-handling.patch [bz#1011720]
  - kvm-rdma-IPv6-over-Ethernet-RoCE-is-broken-in-linux-work.patch [bz#1011720]
  - kvm-rdma-remaining-documentation-fixes.patch [bz#1011720]
  - kvm-rdma-silly-ipv6-bugfix.patch [bz#1011720]
  - kvm-savevm-fix-wrong-initialization-by-ram_control_load_.patch [bz#1011720]
  - kvm-arch_init-right-return-for-ram_save_iterate.patch [bz#1011720]
  - kvm-rdma-clean-up-of-qemu_rdma_cleanup.patch [bz#1011720]
  - kvm-rdma-constify-ram_chunk_-index-start-end.patch [bz#1011720]
  - kvm-migration-Fix-debug-print-type.patch [bz#1011720]
  - kvm-arch_init-make-is_zero_page-accept-size.patch [bz#1011720]
  - kvm-migration-ram_handle_compressed.patch [bz#1011720]
  - kvm-migration-fix-spice-migration.patch [bz#1011720]
  - kvm-pci-assign-cap-number-of-devices-that-can-be-assigne.patch [bz#678368]
  - kvm-vfio-cap-number-of-devices-that-can-be-assigned.patch [bz#678368]
  - kvm-Revert-usb-tablet-Don-t-claim-wakeup-capability-for-.patch [bz#1039513]
  - kvm-mempath-prefault-pages-manually-v4.patch [bz#1026554]
  - Resolves: bz#1011720
    ([HP 7.0 Feat]: Backport RDMA based live guest migration changes from upstream to RHEL7.0 KVM)
  - Resolves: bz#1026554
    (qemu: mempath: prefault pages manually)
  - Resolves: bz#1039513
    (backport remote wakeup for ehci)
  - Resolves: bz#678368
    (RFE: Support more than 8 assigned devices)


author: Michal Novotny <minovotn@redhat.com> - 1.5.3-27.el7
changelog:
  - Change systemd service location [bz#1025217]
  - kvm-vmdk-Allow-read-only-open-of-VMDK-version-3.patch [bz#1007710 bz#1029852]
  - Resolves: bz#1007710
    ([RFE] Enable qemu-img to support VMDK version 3)
  - Resolves: bz#1025217
    (systemd can't control ksm.service and ksmtuned.service)
  - Resolves: bz#1029852
    (qemu-img fails to convert vmdk image with "qemu-img: Could not open 'image.vmdk'")


author: Michal Novotny <minovotn@redhat.com> - 1.5.3-28.el7
changelog:
  - kvm-virtio_pci-fix-level-interrupts-with-irqfd.patch [bz#1035132]
  - Resolves: bz#1035132
    (fail to boot and call trace with x-data-plane=on specified for rhel6.5 guest)


author: Michal Novotny <minovotn@redhat.com> - 1.5.3-29.el7
changelog:
  - kvm-QMP-Forward-port-__com.redhat_drive_del-from-RHEL-6.patch [bz#889051]
  - kvm-QMP-Forward-port-__com.redhat_drive_add-from-RHEL-6.patch [bz#889051]
  - kvm-HMP-Forward-port-__com.redhat_drive_add-from-RHEL-6.patch [bz#889051]
  - kvm-QMP-Document-throttling-parameters-of-__com.redhat_d.patch [bz#889051]
  - kvm-HMP-Disable-drive_add-for-Red-Hat-Enterprise-Linux.patch [bz#889051]
  - Resolves: bz#889051
    (Commands "__com.redhat_drive_add/del" don' t exist in RHEL7.0)


author: Michal Novotny <minovotn@redhat.com> - 1.5.3-30.el7
changelog:
  - kvm-Revert-HMP-Disable-drive_add-for-Red-Hat-Enterprise-2.patch.patch [bz#889051]
  - Resolves: bz#889051
    (Commands "__com.redhat_drive_add/del" don' t exist in RHEL7.0)


author: Michal Novotny <minovotn@redhat.com> - 1.5.3-32.el7
changelog:
  - kvm-block-change-default-of-.has_zero_init-to-0.patch.patch [bz#1007815]
  - kvm-iscsi-factor-out-sector-conversions.patch.patch [bz#1007815]
  - kvm-iscsi-add-logical-block-provisioning-information-to-.patch.patch [bz#1007815]
  - kvm-iscsi-add-.bdrv_get_block_status.patch.patch.patch [bz#1007815]
  - kvm-iscsi-split-discard-requests-in-multiple-parts.patch.patch.patch [bz#1007815]
  - kvm-block-make-BdrvRequestFlags-public.patch.patch.patch [bz#1007815]
  - kvm-block-add-flags-to-bdrv_-_write_zeroes.patch.patch.patch [bz#1007815]
  - kvm-block-introduce-BDRV_REQ_MAY_UNMAP-request-flag.patch.patch.patch [bz#1007815]
  - kvm-block-add-logical-block-provisioning-info-to-BlockDr.patch.patch.patch [bz#1007815]
  - kvm-block-add-wrappers-for-logical-block-provisioning-in.patch.patch.patch [bz#1007815]
  - kvm-block-iscsi-add-.bdrv_get_info.patch.patch [bz#1007815]
  - kvm-block-add-BlockLimits-structure-to-BlockDriverState.patch.patch.patch [bz#1007815]
  - kvm-block-raw-copy-BlockLimits-on-raw_open.patch.patch.patch [bz#1007815]
  - kvm-block-honour-BlockLimits-in-bdrv_co_do_write_zeroes.patch.patch.patch [bz#1007815]
  - kvm-block-honour-BlockLimits-in-bdrv_co_discard.patch.patch.patch [bz#1007815]
  - kvm-iscsi-set-limits-in-BlockDriverState.patch.patch.patch [bz#1007815]
  - kvm-iscsi-simplify-iscsi_co_discard.patch.patch.patch [bz#1007815]
  - kvm-iscsi-add-bdrv_co_write_zeroes.patch.patch.patch [bz#1007815]
  - kvm-block-introduce-bdrv_make_zero.patch.patch.patch [bz#1007815]
  - kvm-block-get_block_status-fix-BDRV_BLOCK_ZERO-for-unall.patch.patch.patch [bz#1007815]
  - kvm-qemu-img-add-support-for-fully-allocated-images.patch.patch.patch [bz#1007815]
  - kvm-qemu-img-conditionally-zero-out-target-on-convert.patch.patch.patch [bz#1007815]
  - kvm-block-generalize-BlockLimits-handling-to-cover-bdrv_.patch.patch.patch [bz#1007815]
  - kvm-block-add-flags-to-BlockRequest.patch.patch.patch [bz#1007815]
  - kvm-block-add-flags-argument-to-bdrv_co_write_zeroes-tra.patch.patch.patch [bz#1007815]
  - kvm-block-add-bdrv_aio_write_zeroes.patch.patch.patch [bz#1007815]
  - kvm-block-handle-ENOTSUP-from-discard-in-generic-code.patch.patch.patch [bz#1007815]
  - kvm-block-make-bdrv_co_do_write_zeroes-stricter-in-produ.patch.patch.patch [bz#1007815]
  - kvm-vpc-vhdx-add-get_info.patch.patch.patch [bz#1007815]
  - kvm-block-drivers-add-discard-write_zeroes-properties-to.patch.patch.patch [bz#1007815]
  - kvm-block-drivers-expose-requirement-for-write-same-alig.patch.patch.patch [bz#1007815]
  - kvm-block-iscsi-remove-.bdrv_has_zero_init.patch.patch.patch [bz#1007815]
  - kvm-block-iscsi-updated-copyright.patch.patch.patch [bz#1007815]
  - kvm-block-iscsi-check-WRITE-SAME-support-differently-dep.patch.patch.patch [bz#1007815]
  - kvm-scsi-disk-catch-write-protection-errors-in-UNMAP.patch.patch.patch [bz#1007815]
  - kvm-scsi-disk-reject-ANCHOR-1-for-UNMAP-and-WRITE-SAME-c.patch.patch.patch [bz#1007815]
  - kvm-scsi-disk-correctly-implement-WRITE-SAME.patch.patch.patch [bz#1007815]
  - kvm-scsi-disk-fix-WRITE-SAME-with-large-non-zero-payload.patch.patch.patch [bz#1007815]
  - kvm-raw-posix-implement-write_zeroes-with-MAY_UNMAP-for-.patch.patch.patch.patch [bz#1007815]
  - kvm-raw-posix-implement-write_zeroes-with-MAY_UNMAP-for-.patch.patch.patch.patch.patch [bz#1007815]
  - kvm-raw-posix-add-support-for-write_zeroes-on-XFS-and-bl.patch.patch [bz#1007815]
  - kvm-qemu-iotests-033-is-fast.patch.patch [bz#1007815]
  - kvm-qemu-img-add-support-for-skipping-zeroes-in-input-du.patch.patch [bz#1007815]
  - kvm-qemu-img-fix-usage-instruction-for-qemu-img-convert.patch.patch [bz#1007815]
  - kvm-block-iscsi-set-bdi-cluster_size.patch.patch [bz#1007815]
  - kvm-block-add-opt_transfer_length-to-BlockLimits.patch.patch [bz#1039557]
  - kvm-block-iscsi-set-bs-bl.opt_transfer_length.patch.patch [bz#1039557]
  - kvm-qemu-img-dynamically-adjust-iobuffer-size-during-con.patch.patch [bz#1039557]
  - kvm-qemu-img-round-down-request-length-to-an-aligned-sec.patch.patch [bz#1039557]
  - kvm-qemu-img-decrease-progress-update-interval-on-conver.patch.patch [bz#1039557]
  - Resolves: bz#1007815
    (fix WRITE SAME support)
  - Resolves: bz#1039557
    (optimize qemu-img for thin provisioned images)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-33.el7
changelog:
  - kvm-block-qemu-iotests-for-vhdx-read-sample-dynamic-imag.patch [bz#879234]
  - kvm-block-qemu-iotests-add-quotes-to-TEST_IMG-usage-io-p.patch [bz#879234]
  - kvm-block-qemu-iotests-fix-_make_test_img-to-work-with-s.patch [bz#879234]
  - kvm-block-qemu-iotests-add-quotes-to-TEST_IMG.base-usage.patch [bz#879234]
  - kvm-block-qemu-iotests-add-quotes-to-TEST_IMG-usage-in-0.patch [bz#879234]
  - kvm-block-qemu-iotests-removes-duplicate-double-quotes-i.patch [bz#879234]
  - kvm-block-vhdx-minor-comments-and-typo-correction.patch [bz#879234]
  - kvm-block-vhdx-add-header-update-capability.patch [bz#879234]
  - kvm-block-vhdx-code-movement-VHDXMetadataEntries-and-BDR.patch [bz#879234]
  - kvm-block-vhdx-log-support-struct-and-defines.patch [bz#879234]
  - kvm-block-vhdx-break-endian-translation-functions-out.patch [bz#879234]
  - kvm-block-vhdx-update-log-guid-in-header-and-first-write.patch [bz#879234]
  - kvm-block-vhdx-code-movement-move-vhdx_close-above-vhdx_.patch [bz#879234]
  - kvm-block-vhdx-log-parsing-replay-and-flush-support.patch [bz#879234]
  - kvm-block-vhdx-add-region-overlap-detection-for-image-fi.patch [bz#879234]
  - kvm-block-vhdx-add-log-write-support.patch [bz#879234]
  - kvm-block-vhdx-write-support.patch [bz#879234]
  - kvm-block-vhdx-remove-BAT-file-offset-bit-shifting.patch [bz#879234]
  - kvm-block-vhdx-move-more-endian-translations-to-vhdx-end.patch [bz#879234]
  - kvm-block-vhdx-break-out-code-operations-to-functions.patch [bz#879234]
  - kvm-block-vhdx-fix-comment-typos-in-header-fix-incorrect.patch [bz#879234]
  - kvm-block-vhdx-add-.bdrv_create-support.patch [bz#879234]
  - kvm-block-vhdx-update-_make_test_img-to-filter-out-vhdx-.patch [bz#879234]
  - kvm-block-qemu-iotests-for-vhdx-add-write-test-support.patch [bz#879234]
  - kvm-block-vhdx-qemu-iotest-log-replay-of-data-sector.patch [bz#879234]
  - Resolves: bz#879234
    ([RFE] qemu-img: Add/improve support for VHDX format)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-34.el7
changelog:
  - kvm-block-stream-Don-t-stream-unbacked-devices.patch [bz#965636]
  - kvm-qemu-io-Let-open-pass-options-to-block-driver.patch [bz#1004347]
  - kvm-qcow2.py-Subcommand-for-changing-header-fields.patch [bz#1004347]
  - kvm-qemu-iotests-Remaining-error-propagation-adjustments.patch [bz#1004347]
  - kvm-qemu-iotests-Add-test-for-inactive-L2-overlap.patch [bz#1004347]
  - kvm-qemu-iotests-Adjust-test-result-039.patch [bz#1004347]
  - kvm-virtio-net-don-t-update-mac_table-in-error-state.patch [bz#1048671]
  - kvm-qcow2-Zero-initialise-first-cluster-for-new-images.patch [bz#1032904]
  - Resolves: bz#1004347
    (Backport qcow2 corruption prevention patches)
  - Resolves: bz#1032904
    (qemu-img can not create libiscsi qcow2_v3 image)
  - Resolves: bz#1048671
    (virtio-net: mac_table change isn't recovered in error state)
  - Resolves: bz#965636
    (streaming with no backing file should not do anything)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-35.el7
changelog:
  - kvm-option-Add-assigned-flag-to-QEMUOptionParameter.patch [bz#1033490]
  - kvm-qcow2-refcount-Snapshot-update-for-zero-clusters.patch [bz#1033490]
  - kvm-qemu-iotests-Snapshotting-zero-clusters.patch [bz#1033490]
  - kvm-block-Image-file-option-amendment.patch [bz#1033490]
  - kvm-qcow2-cache-Empty-cache.patch [bz#1033490]
  - kvm-qcow2-cluster-Expand-zero-clusters.patch [bz#1033490]
  - kvm-qcow2-Save-refcount-order-in-BDRVQcowState.patch [bz#1033490]
  - kvm-qcow2-Implement-bdrv_amend_options.patch [bz#1033490]
  - kvm-qcow2-Correct-bitmap-size-in-zero-expansion.patch [bz#1033490]
  - kvm-qcow2-Free-only-newly-allocated-clusters-on-error.patch [bz#1033490]
  - kvm-qcow2-Add-missing-space-in-error-message.patch [bz#1033490]
  - kvm-qemu-iotest-qcow2-image-option-amendment.patch [bz#1033490]
  - kvm-qemu-iotests-New-test-case-in-061.patch [bz#1033490]
  - kvm-qemu-iotests-Preallocated-zero-clusters-in-061.patch [bz#1033490]
  - Resolves: bz#1033490
    (Cannot upgrade/downgrade qcow2 images)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-36.el7
changelog:
  - kvm-Add-support-statement-to-help-output.patch [bz#972773]
  - kvm-__com.redhat_qxl_screendump-add-docs.patch [bz#903910]
  - kvm-vl-Round-memory-sizes-below-2MiB-up-to-2MiB.patch [bz#999836]
  - kvm-seccomp-exit-if-seccomp_init-fails.patch [bz#1044845]
  - kvm-redhat-qemu-kvm.spec-require-python-for-build.patch [bz#1034876]
  - kvm-redhat-qemu-kvm.spec-require-iasl.patch [bz#1034876]
  - kvm-configure-make-iasl-option-actually-work.patch [bz#1034876]
  - kvm-redhat-qemu-kvm.spec-add-cpp-as-build-dependency.patch [bz#1034876]
  - kvm-acpi-build-disable-with-no-acpi.patch [bz#1045386]
  - kvm-ehci-implement-port-wakeup.patch [bz#1039513]
  - kvm-qdev-monitor-Fix-crash-when-device_add-is-called-wit.patch [bz#1026712 bz#1046007]
  - kvm-block-vhdx-improve-error-message-and-.bdrv_check-imp.patch [bz#1035001]
  - kvm-docs-updated-qemu-img-man-page-and-qemu-doc-to-refle.patch [bz#1017650]
  - kvm-enable-pvticketlocks-by-default.patch [bz#1052340]
  - kvm-fix-boot-strict-regressed-in-commit-6ef4716.patch [bz#997817]
  - kvm-vl-make-boot_strict-variable-static-not-used-outside.patch [bz#997817]
  - Resolves: bz#1017650
    (need to update qemu-img man pages on "VHDX" format)
  - Resolves: bz#1026712
    (Qemu core dumpd when boot guest with driver name as "virtio-pci")
  - Resolves: bz#1034876
    (export acpi tables to guests)
  - Resolves: bz#1035001
    (VHDX: journal log should not be replayed by default, but rather via qemu-img check -r all)
  - Resolves: bz#1039513
    (backport remote wakeup for ehci)
  - Resolves: bz#1044845
    (QEMU seccomp sandbox - exit if seccomp_init() fails)
  - Resolves: bz#1045386
    (qemu-kvm: hw/i386/acpi-build.c:135: acpi_get_pm_info: Assertion `obj' failed.)
  - Resolves: bz#1046007
    (qemu-kvm aborted when hot plug PCI device to guest with romfile and rombar=0)
  - Resolves: bz#1052340
    (pvticketlocks: default on)
  - Resolves: bz#903910
    (RHEL7 does not have equivalent functionality for __com.redhat_qxl_screendump)
  - Resolves: bz#972773
    (RHEL7: Clarify support statement in KVM help)
  - Resolves: bz#997817
    (-boot order and -boot once regressed since RHEL-6)
  - Resolves: bz#999836
    (-m 1 crashes)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-37.el7
changelog:
  - kvm-bitmap-use-long-as-index.patch [bz#997559]
  - kvm-memory-cpu_physical_memory_set_dirty_flags-result-is.patch [bz#997559]
  - kvm-memory-cpu_physical_memory_set_dirty_range-return-vo.patch [bz#997559]
  - kvm-exec-use-accessor-function-to-know-if-memory-is-dirt.patch [bz#997559]
  - kvm-memory-create-function-to-set-a-single-dirty-bit.patch [bz#997559]
  - kvm-exec-drop-useless-if.patch [bz#997559]
  - kvm-exec-create-function-to-get-a-single-dirty-bit.patch [bz#997559]
  - kvm-memory-make-cpu_physical_memory_is_dirty-return-bool.patch [bz#997559]
  - kvm-memory-all-users-of-cpu_physical_memory_get_dirty-us.patch [bz#997559]
  - kvm-memory-set-single-dirty-flags-when-possible.patch [bz#997559]
  - kvm-memory-cpu_physical_memory_set_dirty_range-always-di.patch [bz#997559]
  - kvm-memory-cpu_physical_memory_mask_dirty_range-always-c.patch [bz#997559]
  - kvm-memory-use-bit-2-for-migration.patch [bz#997559]
  - kvm-memory-make-sure-that-client-is-always-inside-range.patch [bz#997559]
  - kvm-memory-only-resize-dirty-bitmap-when-memory-size-inc.patch [bz#997559]
  - kvm-memory-cpu_physical_memory_clear_dirty_flag-result-i.patch [bz#997559]
  - kvm-bitmap-Add-bitmap_zero_extend-operation.patch [bz#997559]
  - kvm-memory-split-dirty-bitmap-into-three.patch [bz#997559]
  - kvm-memory-unfold-cpu_physical_memory_clear_dirty_flag-i.patch [bz#997559]
  - kvm-memory-unfold-cpu_physical_memory_set_dirty-in-its-o.patch [bz#997559]
  - kvm-memory-unfold-cpu_physical_memory_set_dirty_flag.patch [bz#997559]
  - kvm-memory-make-cpu_physical_memory_get_dirty-the-main-f.patch [bz#997559]
  - kvm-memory-cpu_physical_memory_get_dirty-is-used-as-retu.patch [bz#997559]
  - kvm-memory-s-mask-clear-cpu_physical_memory_mask_dirty_r.patch [bz#997559]
  - kvm-memory-use-find_next_bit-to-find-dirty-bits.patch [bz#997559]
  - kvm-memory-cpu_physical_memory_set_dirty_range-now-uses-.patch [bz#997559]
  - kvm-memory-cpu_physical_memory_clear_dirty_range-now-use.patch [bz#997559]
  - kvm-memory-s-dirty-clean-in-cpu_physical_memory_is_dirty.patch [bz#997559]
  - kvm-memory-make-cpu_physical_memory_reset_dirty-take-a-l.patch [bz#997559]
  - kvm-exec-Remove-unused-global-variable-phys_ram_fd.patch [bz#997559]
  - kvm-memory-cpu_physical_memory_set_dirty_tracking-should.patch [bz#997559]
  - kvm-memory-move-private-types-to-exec.c.patch [bz#997559]
  - kvm-memory-split-cpu_physical_memory_-functions-to-its-o.patch [bz#997559]
  - kvm-memory-unfold-memory_region_test_and_clear.patch [bz#997559]
  - kvm-use-directly-cpu_physical_memory_-api-for-tracki.patch [bz#997559]
  - kvm-refactor-start-address-calculation.patch [bz#997559]
  - kvm-memory-move-bitmap-synchronization-to-its-own-functi.patch [bz#997559]
  - kvm-memory-syncronize-kvm-bitmap-using-bitmaps-operation.patch [bz#997559]
  - kvm-ram-split-function-that-synchronizes-a-range.patch [bz#997559]
  - kvm-migration-synchronize-memory-bitmap-64bits-at-a-time.patch [bz#997559]
  - Resolves: bz#997559
    (Improve live migration bitmap handling)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-38.el7
changelog:
  - kvm-intel-hda-fix-position-buffer.patch [bz#947785]
  - kvm-The-calculation-of-bytes_xfer-in-qemu_put_buffer-is-.patch [bz#1003467]
  - kvm-migration-Fix-rate-limit.patch [bz#1003467]
  - kvm-audio-honor-QEMU_AUDIO_TIMER_PERIOD-instead-of-wakin.patch [bz#1017636]
  - kvm-audio-Lower-default-wakeup-rate-to-100-times-second.patch [bz#1017636]
  - kvm-audio-adjust-pulse-to-100Hz-wakeup-rate.patch [bz#1017636]
  - kvm-pc-Fix-rhel6.-3dnow-3dnowext-compat-bits.patch [bz#918907]
  - kvm-add-firmware-to-machine-options.patch [bz#1038603]
  - kvm-switch-rhel7-machine-types-to-big-bios.patch [bz#1038603]
  - kvm-add-bios-256k.bin-from-seabios-bin-1.7.2.2-10.el7.no.patch [bz#1038603]
  - kvm-pci-fix-pci-bridge-fw-path.patch [bz#1034518]
  - kvm-hw-cannot_instantiate_with_device_add_yet-due-to-poi.patch [bz#1031098]
  - kvm-qdev-Document-that-pointer-properties-kill-device_ad.patch [bz#1031098]
  - kvm-Add-back-no-hpet-but-ignore-it.patch [bz#1044742]
  - Resolves: bz#1003467
    (Backport migration fixes from post qemu 1.6)
  - Resolves: bz#1017636
    (PATCH: fix qemu using 50% host cpu when audio is playing)
  - Resolves: bz#1031098
    (Disable device smbus-eeprom)
  - Resolves: bz#1034518
    (boot order wrong with q35)
  - Resolves: bz#1038603
    (make seabios 256k for rhel7 machine types)
  - Resolves: bz#1044742
    (Cannot create guest on remote RHEL7 host using F20 virt-manager, libvirt's qemu -no-hpet detection is broken)
  - Resolves: bz#918907
    (provide backwards-compatible RHEL specific machine types in QEMU - CPU features)
  - Resolves: bz#947785
    (In rhel6.4 guest  sound recorder doesn't work when  playing audio)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-39.el7
changelog:
  - kvm-Revert-qdev-monitor-Fix-crash-when-device_add-is-cal.patch [bz#669524]
  - kvm-Revert-qdev-Do-not-let-the-user-try-to-device_add-wh.patch [bz#669524]
  - kvm-qdev-monitor-Clean-up-qdev_device_add-variable-namin.patch [bz#669524]
  - kvm-qdev-monitor-Fix-crash-when-device_add-is-called.2.patch.patch [bz#669524]
  - kvm-qdev-monitor-Avoid-qdev-as-variable-name.patch [bz#669524]
  - kvm-qdev-monitor-Inline-qdev_init-for-device_add.patch [bz#669524]
  - kvm-qdev-Do-not-let-the-user-try-to-device_add-when-it.2.patch.patch [bz#669524]
  - kvm-qdev-monitor-Avoid-device_add-crashing-on-non-device.patch [bz#669524]
  - kvm-qdev-monitor-Improve-error-message-for-device-nonexi.patch [bz#669524]
  - kvm-exec-change-well-known-physical-sections-to-macros.patch [bz#1003535]
  - kvm-exec-separate-sections-and-nodes-per-address-space.patch [bz#1003535]
  - Resolves: bz#1003535
    (qemu-kvm core dump when boot vm with more than 32 virtio disks/nics)
  - Resolves: bz#669524
    (Confusing error message from -device <unknown dev>)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-40.el7
changelog:
  - kvm-avoid-a-bogus-COMPLETED-CANCELLED-transition.patch [bz#1053699]
  - kvm-introduce-MIG_STATE_CANCELLING-state.patch [bz#1053699]
  - kvm-vvfat-use-bdrv_new-to-allocate-BlockDriverState.patch [bz#1041301]
  - kvm-block-implement-reference-count-for-BlockDriverState.patch [bz#1041301]
  - kvm-block-make-bdrv_delete-static.patch [bz#1041301]
  - kvm-migration-omit-drive-ref-as-we-have-bdrv_ref-now.patch [bz#1041301]
  - kvm-xen_disk-simplify-blk_disconnect-with-refcnt.patch [bz#1041301]
  - kvm-nbd-use-BlockDriverState-refcnt.patch [bz#1041301]
  - kvm-block-use-BDS-ref-for-block-jobs.patch [bz#1041301]
  - kvm-block-Make-BlockJobTypes-const.patch [bz#1041301]
  - kvm-blockjob-rename-BlockJobType-to-BlockJobDriver.patch [bz#1041301]
  - kvm-qapi-Introduce-enum-BlockJobType.patch [bz#1041301]
  - kvm-qapi-make-use-of-new-BlockJobType.patch [bz#1041301]
  - kvm-mirror-Don-t-close-target.patch [bz#1041301]
  - kvm-mirror-Move-base-to-MirrorBlockJob.patch [bz#1041301]
  - kvm-block-Add-commit_active_start.patch [bz#1041301]
  - kvm-commit-Support-commit-active-layer.patch [bz#1041301]
  - kvm-qemu-iotests-prefill-some-data-to-test-image.patch [bz#1041301]
  - kvm-qemu-iotests-Update-test-cases-for-commit-active.patch [bz#1041301]
  - kvm-commit-Remove-unused-check.patch [bz#1041301]
  - kvm-blockdev-use-bdrv_getlength-in-qmp_drive_mirror.patch [bz#921890]
  - kvm-qemu-iotests-make-assert_no_active_block_jobs-common.patch [bz#921890]
  - kvm-block-drive-mirror-Check-for-NULL-backing_hd.patch [bz#921890]
  - kvm-qemu-iotests-Extend-041-for-unbacked-mirroring.patch [bz#921890]
  - kvm-qapi-schema-Update-description-for-NewImageMode.patch [bz#921890]
  - kvm-block-drive-mirror-Reuse-backing-HD-for-sync-none.patch [bz#921890]
  - kvm-qemu-iotests-Fix-test-041.patch [bz#921890]
  - kvm-scsi-bus-fix-transfer-length-and-direction-for-VERIF.patch [bz#1035644]
  - kvm-scsi-disk-fix-VERIFY-emulation.patch [bz#1035644]
  - kvm-block-ensure-bdrv_drain_all-works-during-bdrv_delete.patch [bz#1041301]
  - kvm-use-recommended-max-vcpu-count.patch [bz#998708]
  - kvm-pc-Create-pc_compat_rhel-functions.patch [bz#1049706]
  - kvm-pc-Enable-x2apic-by-default-on-more-recent-CPU-model.patch [bz#1049706]
  - kvm-Build-all-subpackages-for-RHEV.patch [bz#1007204]
  - Resolves: bz#1007204
    (qemu-img-rhev  qemu-kvm-rhev-tools are not built for qemu-kvm-1.5.3-3.el7)
  - Resolves: bz#1035644
    (rhel7.0host + windows guest + virtio-win + 'chkdsk' in the guest gives qemu assertion in scsi_dma_complete)
  - Resolves: bz#1041301
    (live snapshot merge (commit) of the active layer)
  - Resolves: bz#1049706
    (MIss CPUID_EXT_X2APIC in Westmere cpu model)
  - Resolves: bz#1053699
    (Backport Cancelled race condition fixes)
  - Resolves: bz#921890
    (Core dump when block mirror with "sync" is "none" and mode is "absolute-paths")
  - Resolves: bz#998708
    (qemu-kvm: maximum vcpu should be recommended maximum)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-41.el7
changelog:
  - kvm-help-add-id-suboption-to-iscsi.patch [bz#1019221]
  - kvm-scsi-disk-add-UNMAP-limits-to-block-limits-VPD-page.patch [bz#1037503]
  - kvm-qdev-Fix-32-bit-compilation-in-print_size.patch [bz#1034876]
  - kvm-qdev-Use-clz-in-print_size.patch [bz#1034876]
  - Resolves: bz#1019221
    (Iscsi miss id sub-option in help output)
  - Resolves: bz#1034876
    (export acpi tables to guests)
  - Resolves: bz#1037503
    (fix thin provisioning support for block device backends)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-43.el7
changelog:
  - kvm-piix-gigabyte-alignment-for-ram.patch [bz#1026548]
  - kvm-pc_piix-document-gigabyte_align.patch [bz#1026548]
  - kvm-q35-gigabyle-alignment-for-ram.patch [bz#1026548]
  - kvm-virtio-bus-remove-vdev-field.patch [bz#983344]
  - kvm-virtio-pci-remove-vdev-field.patch [bz#983344]
  - kvm-virtio-bus-cleanup-plug-unplug-interface.patch [bz#983344]
  - kvm-virtio-blk-switch-exit-callback-to-VirtioDeviceClass.patch [bz#983344]
  - kvm-virtio-serial-switch-exit-callback-to-VirtioDeviceCl.patch [bz#983344]
  - kvm-virtio-net-switch-exit-callback-to-VirtioDeviceClass.patch [bz#983344]
  - kvm-virtio-scsi-switch-exit-callback-to-VirtioDeviceClas.patch [bz#983344]
  - kvm-virtio-balloon-switch-exit-callback-to-VirtioDeviceC.patch [bz#983344]
  - kvm-virtio-rng-switch-exit-callback-to-VirtioDeviceClass.patch [bz#983344]
  - kvm-virtio-pci-add-device_unplugged-callback.patch [bz#983344]
  - kvm-block-use-correct-filename-for-error-report.patch [bz#1051438]
  - Resolves: bz#1026548
    (i386: pc: align gpa<->hpa on 1GB boundary)
  - Resolves: bz#1051438
    (Error message contains garbled characters when unable to open image due to bad permissions (permission denied).)
  - Resolves: bz#983344
    (QEMU core dump and host will reboot when do hot-unplug a virtio-blk disk which use  the switch behind switch)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-44.el7
changelog:
  - kvm-Partially-revert-rhel-Drop-cfi.pflash01-and-isa-ide-.patch [bz#1032346]
  - kvm-Revert-pc-Disable-the-use-flash-device-for-BIOS-unle.patch [bz#1032346]
  - kvm-memory-Replace-open-coded-memory_region_is_romd.patch [bz#1032346]
  - kvm-memory-Rename-readable-flag-to-romd_mode.patch [bz#1032346]
  - kvm-isapc-Fix-non-KVM-qemu-boot-read-write-memory-for-is.patch [bz#1032346]
  - kvm-add-kvm_readonly_mem_enabled.patch [bz#1032346]
  - kvm-support-using-KVM_MEM_READONLY-flag-for-regions.patch [bz#1032346]
  - kvm-pc_sysfw-allow-flash-pflash-memory-to-be-used-with-K.patch [bz#1032346]
  - kvm-fix-double-free-the-memslot-in-kvm_set_phys_mem.patch [bz#1032346]
  - kvm-sysfw-remove-read-only-pc_sysfw_flash_vs_rom_bug_com.patch [bz#1032346]
  - kvm-pc_sysfw-remove-the-rom_only-property.patch [bz#1032346]
  - kvm-pc_sysfw-do-not-make-it-a-device-anymore.patch [bz#1032346]
  - kvm-hw-i386-pc_sysfw-support-two-flash-drives.patch [bz#1032346]
  - kvm-i440fx-test-qtest_start-should-be-paired-with-qtest_.patch [bz#1032346]
  - kvm-i440fx-test-give-each-GTest-case-its-own-qtest.patch [bz#1032346]
  - kvm-i440fx-test-generate-temporary-firmware-blob.patch [bz#1032346]
  - kvm-i440fx-test-verify-firmware-under-4G-and-1M-both-bio.patch [bz#1032346]
  - kvm-piix-fix-32bit-pci-hole.patch [bz#1032346]
  - kvm-qapi-Add-backing-to-BlockStats.patch [bz#1041564]
  - kvm-pc-Disable-RDTSCP-unconditionally-on-rhel6.-machine-.patch [bz#918907]
  - kvm-pc-Disable-RDTSCP-on-AMD-CPU-models.patch [bz#1056428 bz#874400]
  - kvm-block-add-.bdrv_reopen_prepare-stub-for-iscsi.patch [bz#1030301]
  - Resolves: bz#1030301
    (qemu-img can not merge live snapshot to backing file(r/w backing file via libiscsi))
  - Resolves: bz#1032346
    (basic OVMF support (non-volatile UEFI variables in flash, and fixup for ACPI tables))
  - Resolves: bz#1041564
    ([NFR] qemu: Returning the watermark for all the images opened for writing)
  - Resolves: bz#1056428
    ("rdtscp" flag defined on Opteron_G5 model and cann't be exposed to guest)
  - Resolves: bz#874400
    ("rdtscp" flag defined on Opteron_G5 model and cann't be exposed to guest)
  - Resolves: bz#918907
    (provide backwards-compatible RHEL specific machine types in QEMU - CPU features)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-45.el7
changelog:
  - kvm-vfio-pci-Fail-initfn-on-DMA-mapping-errors.patch [bz#1044815]
  - kvm-vfio-Destroy-memory-regions.patch [bz#1052030]
  - kvm-docs-qcow2-compat-1.1-is-now-the-default.patch [bz#1048092]
  - kvm-hda-codec-disable-streams-on-reset.patch [bz#947812]
  - kvm-QEMUBH-make-AioContext-s-bh-re-entrant.patch [bz#1009297]
  - kvm-qxl-replace-pipe-signaling-with-bottom-half.patch [bz#1009297]
  - Resolves: bz#1009297
    (RHEL7.0 guest gui can not be used in dest host after migration)
  - Resolves: bz#1044815
    (vfio initfn succeeds even if IOMMU mappings fail)
  - Resolves: bz#1048092
    (manpage of qemu-img contains error statement about compat option)
  - Resolves: bz#1052030
    (src qemu-kvm core dump after hotplug/unhotplug GPU device and do local migration)
  - Resolves: bz#947812
    (There's a shot voice after  'system_reset'  during playing music inside rhel6 guest w/ intel-hda device)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-46.el7
changelog:
  - kvm-block-fix-backing-file-segfault.patch [bz#748906]
  - kvm-block-Move-initialisation-of-BlockLimits-to-bdrv_ref.patch [bz#748906]
  - kvm-raw-Fix-BlockLimits-passthrough.patch [bz#748906]
  - kvm-block-Inherit-opt_transfer_length.patch [bz#748906]
  - kvm-block-Update-BlockLimits-when-they-might-have-change.patch [bz#748906]
  - kvm-qemu_memalign-Allow-small-alignments.patch [bz#748906]
  - kvm-block-Detect-unaligned-length-in-bdrv_qiov_is_aligne.patch [bz#748906]
  - kvm-block-Don-t-use-guest-sector-size-for-qemu_blockalig.patch [bz#748906]
  - kvm-block-rename-buffer_alignment-to-guest_block_size.patch [bz#748906]
  - kvm-raw-Probe-required-direct-I-O-alignment.patch [bz#748906]
  - kvm-block-Introduce-bdrv_aligned_preadv.patch [bz#748906]
  - kvm-block-Introduce-bdrv_co_do_preadv.patch [bz#748906]
  - kvm-block-Introduce-bdrv_aligned_pwritev.patch [bz#748906]
  - kvm-block-write-Handle-COR-dependency-after-I-O-throttli.patch [bz#748906]
  - kvm-block-Introduce-bdrv_co_do_pwritev.patch [bz#748906]
  - kvm-block-Switch-BdrvTrackedRequest-to-byte-granularity.patch [bz#748906]
  - kvm-block-Allow-waiting-for-overlapping-requests-between.patch [bz#748906]
  - kvm-block-use-DIV_ROUND_UP-in-bdrv_co_do_readv.patch [bz#748906]
  - kvm-block-Make-zero-after-EOF-work-with-larger-alignment.patch [bz#748906]
  - kvm-block-Generalise-and-optimise-COR-serialisation.patch [bz#748906]
  - kvm-block-Make-overlap-range-for-serialisation-dynamic.patch [bz#748906]
  - kvm-block-Fix-32-bit-truncation-in-mark_request_serialis.patch [bz#748906]
  - kvm-block-Allow-wait_serialising_requests-at-any-point.patch [bz#748906]
  - kvm-block-Align-requests-in-bdrv_co_do_pwritev.patch [bz#748906]
  - kvm-lock-Fix-memory-leaks-in-bdrv_co_do_pwritev.patch [bz#748906]
  - kvm-block-Assert-serialisation-assumptions-in-pwritev.patch [bz#748906]
  - kvm-block-Change-coroutine-wrapper-to-byte-granularity.patch [bz#748906]
  - kvm-block-Make-bdrv_pread-a-bdrv_prwv_co-wrapper.patch [bz#748906]
  - kvm-block-Make-bdrv_pwrite-a-bdrv_prwv_co-wrapper.patch [bz#748906]
  - kvm-iscsi-Set-bs-request_alignment.patch [bz#748906]
  - kvm-blkdebug-Make-required-alignment-configurable.patch [bz#748906]
  - kvm-blkdebug-Don-t-leak-bs-file-on-failure.patch [bz#748906]
  - kvm-qemu-io-New-command-sleep.patch [bz#748906]
  - kvm-qemu-iotests-Filter-out-qemu-io-prompt.patch [bz#748906]
  - kvm-qemu-iotests-Test-pwritev-RMW-logic.patch [bz#748906]
  - kvm-block-bdrv_aligned_pwritev-Assert-overlap-range.patch [bz#748906]
  - kvm-block-Don-t-call-ROUND_UP-with-negative-values.patch [bz#748906]
  - Resolves: bz#748906
    (qemu fails on disk with 4k sectors and cache=off)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-47.el7
changelog:
  - kvm-seccomp-add-mkdir-and-fchmod-to-the-whitelist.patch [bz#1026314]
  - kvm-seccomp-add-some-basic-shared-memory-syscalls-to-the.patch [bz#1026314]
  - kvm-scsi-Support-TEST-UNIT-READY-in-the-dummy-LUN0.patch [bz#1004143]
  - kvm-usb-add-vendor-request-defines.patch [bz#1039530]
  - kvm-usb-move-usb_-hi-lo-helpers-to-header-file.patch [bz#1039530]
  - kvm-usb-add-support-for-microsoft-os-descriptors.patch [bz#1039530]
  - kvm-usb-add-microsoft-os-descriptors-compat-property.patch [bz#1039530]
  - kvm-usb-hid-add-microsoft-os-descriptor-support.patch [bz#1039530]
  - kvm-configure-add-option-to-disable-fstack-protect.patch [bz#1044182]
  - kvm-exec-always-use-MADV_DONTFORK.patch [bz#1004197]
  - kvm-pc-Save-size-of-RAM-below-4GB.patch [bz#1048080]
  - kvm-acpi-Fix-PCI-hole-handling-on-build_srat.patch [bz#1048080]
  - kvm-Add-check-for-cache-size-smaller-than-page-size.patch [bz#1017096]
  - kvm-XBZRLE-cache-size-should-not-be-larger-than-guest-me.patch [bz#1047448]
  - kvm-Don-t-abort-on-out-of-memory-when-creating-page-cach.patch [bz#1047448]
  - kvm-Don-t-abort-on-memory-allocation-error.patch [bz#1047448]
  - kvm-Set-xbzrle-buffers-to-NULL-after-freeing-them-to-avo.patch [bz#1038540]
  - kvm-migration-fix-free-XBZRLE-decoded_buf-wrong.patch [bz#1038540]
  - kvm-block-resize-backing-file-image-during-offline-commi.patch [bz#1047254]
  - kvm-block-resize-backing-image-during-active-layer-commi.patch [bz#1047254]
  - kvm-block-update-block-commit-documentation-regarding-im.patch [bz#1047254]
  - kvm-block-Fix-bdrv_commit-return-value.patch [bz#1047254]
  - kvm-block-remove-QED-.bdrv_make_empty-implementation.patch [bz#1047254]
  - kvm-block-remove-qcow2-.bdrv_make_empty-implementation.patch [bz#1047254]
  - kvm-qemu-progress-Drop-unused-include.patch [bz#997878]
  - kvm-qemu-progress-Fix-progress-printing-on-SIGUSR1.patch [bz#997878]
  - kvm-Documentation-qemu-img-Mention-SIGUSR1-progress-repo.patch [bz#997878]
  - Resolves: bz#1004143
    ("test unit ready failed" on LUN 0 delays boot when a virtio-scsi target does not have any disk on LUN 0)
  - Resolves: bz#1004197
    (Cannot hot-plug nic in windows VM when the vmem is larger)
  - Resolves: bz#1017096
    (Fail to migrate while the size of migrate-compcache less then 4096)
  - Resolves: bz#1026314
    (qemu-kvm hang when use '-sandbox on'+'vnc'+'hda')
  - Resolves: bz#1038540
    (qemu-kvm aborted while cancel migration then restart it (with page delta compression))
  - Resolves: bz#1039530
    (add support for microsoft os descriptors)
  - Resolves: bz#1044182
    (Relax qemu-kvm stack protection to -fstack-protector-strong)
  - Resolves: bz#1047254
    (qemu-img failed to commit image)
  - Resolves: bz#1047448
    (qemu-kvm core  dump in src host when do migration with "migrate_set_capability xbzrle on and migrate_set_cache_size 10000G")
  - Resolves: bz#1048080
    (Qemu-kvm NUMA emulation failed)
  - Resolves: bz#997878
    (Kill -SIGUSR1 `pidof qemu-img convert` can not get progress of qemu-img)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-48.el7
changelog:
  - kvm-spec-disable-qom-cast-debug.patch [bz#1063942]
  - kvm-fix-guest-physical-bits-to-match-host-to-go-beyond-1.patch [bz#989677]
  - kvm-monitor-Cleanup-mon-outbuf-on-write-error.patch [bz#1065225]
  - Resolves: bz#1063942
    (configure qemu-kvm with --disable-qom-cast-debug)
  - Resolves: bz#1065225
    (QMP socket breaks on unexpected close)
  - Resolves: bz#989677
    ([HP 7.0 FEAT]: Increase KVM guest supported memory to 4TiB)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-49.el7
changelog:
  - kvm-xhci-add-support-for-suspend-resume.patch [bz#1012365]
  - kvm-qcow2-remove-n_start-and-n_end-of-qcow2_alloc_cluste.patch [bz#1049176]
  - kvm-qcow2-fix-offset-overflow-in-qcow2_alloc_clusters_at.patch [bz#1049176]
  - kvm-qcow2-check-for-NULL-l2meta.patch [bz#1055848]
  - kvm-qemu-iotests-add-test-for-qcow2-preallocation-with-d.patch [bz#1055848]
  - Resolves: bz#1012365
    (xhci usb storage lost in guest after wakeup from S3)
  - Resolves: bz#1049176
    (qemu-img core dump when using "-o preallocation=metadata,cluster_size=2048k" to create image of libiscsi lun)
  - Resolves: bz#1055848
    (qemu-img core dumped when cluster size is larger than the default value with opreallocation=metadata specified)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-50.el7
changelog:
  - kvm-mempath-prefault-fix-off-by-one-error.patch [bz#1069039]
  - kvm-qemu-option-has_help_option-and-is_valid_option_list.patch [bz#1065873]
  - kvm-qemu-img-create-Support-multiple-o-options.patch [bz#1065873]
  - kvm-qemu-img-convert-Support-multiple-o-options.patch [bz#1065873]
  - kvm-qemu-img-amend-Support-multiple-o-options.patch [bz#1065873]
  - kvm-qemu-img-Allow-o-help-with-incomplete-argument-list.patch [bz#1065873]
  - kvm-qemu-iotests-Check-qemu-img-command-line-parsing.patch [bz#1065873]
  - Resolves: bz#1065873
    (qemu-img silently ignores options with multiple -o parameters)
  - Resolves: bz#1069039
    (-mem-prealloc option behaviour is opposite to expected)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-51.el7
changelog:
  - kvm-qmp-access-the-local-QemuOptsLists-for-drive-option.patch [bz#1026184]
  - kvm-qxl-add-sanity-check.patch [bz#751937]
  - kvm-Fix-two-XBZRLE-corruption-issues.patch [bz#1063417]
  - kvm-qdev-monitor-set-DeviceState-opts-before-calling-rea.patch [bz#1037956]
  - kvm-vfio-blacklist-loading-of-unstable-roms.patch [bz#1037956]
  - kvm-block-Set-block-filename-sizes-to-PATH_MAX-instead-o.patch [bz#1072339]
  - Resolves: bz#1026184
    (QMP: querying -drive option returns a NULL parameter list)
  - Resolves: bz#1037956
    (bnx2x: boot one guest to do vfio-pci with all PFs assigned in same group meet QEMU segmentation fault (Broadcom BCM57810 card))
  - Resolves: bz#1063417
    (google stressapptest vs Migration)
  - Resolves: bz#1072339
    (RHEV: Cannot start VMs that have more than 23 snapshots.)
  - Resolves: bz#751937
    (qxl triggers assert during iofuzz test)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-52.el7
changelog:
  - kvm-target-i386-Move-hyperv_-static-globals-to-X86CPU.patch [bz#1004773]
  - kvm-Fix-uninitialized-cpuid_data.patch [bz#1057173]
  - kvm-fix-coexistence-of-KVM-and-Hyper-V-leaves.patch [bz#1004773]
  - kvm-make-availability-of-Hyper-V-enlightenments-depe.patch [bz#1004773]
  - kvm-make-hyperv-hypercall-and-guest-os-id-MSRs-migra.patch [bz#1004773]
  - kvm-make-hyperv-vapic-assist-page-migratable.patch [bz#1004773]
  - kvm-target-i386-Convert-hv_relaxed-to-static-property.patch [bz#1057173]
  - kvm-target-i386-Convert-hv_vapic-to-static-property.patch [bz#1057173]
  - kvm-target-i386-Convert-hv_spinlocks-to-static-property.patch [bz#1057173]
  - kvm-target-i386-Convert-check-and-enforce-to-static-prop.patch [bz#1004773]
  - kvm-target-i386-Cleanup-foo-feature-handling.patch [bz#1057173]
  - kvm-add-support-for-hyper-v-timers.patch [bz#1057173]
  - Resolves: bz#1004773
    (Hyper-V guest OS id and hypercall MSRs not migrated)
  - Resolves: bz#1057173
    (KVM Hyper-V Enlightenment - New feature - hv-time (QEMU))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-53.el7
changelog:
  - kvm-dataplane-Fix-startup-race.patch [bz#1069541]
  - kvm-QMP-Relax-__com.redhat_drive_add-parameter-checking.patch [bz#1057471]
  - kvm-all-exit-in-case-max-vcpus-exceeded.patch [bz#993429]
  - kvm-block-gluster-code-movements-state-storage-changes.patch [bz#1031526]
  - kvm-block-gluster-add-reopen-support.patch [bz#1031526]
  - kvm-virtio-net-add-feature-bit-for-any-header-s-g.patch [bz#990989]
  - kvm-spec-Add-README.rhel6-gpxe-source.patch [bz#1073774]
  - kvm-pc-Add-RHEL6-e1000-gPXE-image.patch [bz#1073774]
  - kvm-loader-rename-in_ram-has_mr.patch [bz#1064018]
  - kvm-pc-avoid-duplicate-names-for-ROM-MRs.patch [bz#1064018]
  - kvm-qemu-img-convert-Fix-progress-output.patch [bz#1073728]
  - kvm-qemu-iotests-Test-progress-output-for-conversion.patch [bz#1073728]
  - kvm-iscsi-Use-bs-sg-for-everything-else-than-disks.patch [bz#1067784]
  - kvm-block-Fix-bs-request_alignment-assertion-for-bs-sg-1.patch [bz#1067784]
  - kvm-qemu_file-use-fwrite-correctly.patch [bz#1005103]
  - kvm-qemu_file-Fix-mismerge-of-use-fwrite-correctly.patch [bz#1005103]
  - Resolves: bz#1005103
    (Migration should fail when migrate guest offline to a file which is specified to a readonly directory.)
  - Resolves: bz#1031526
    (Can not commit snapshot when disk is using glusterfs:native backend)
  - Resolves: bz#1057471
    (fail to do hot-plug with "discard = on" with "Invalid parameter 'discard'" error)
  - Resolves: bz#1064018
    (abort from conflicting genroms)
  - Resolves: bz#1067784
    (qemu-kvm: block.c:850: bdrv_open_common: Assertion `bs->request_alignment != 0' failed. Aborted (core dumped))
  - Resolves: bz#1069541
    (Segmentation fault when boot guest with dataplane=on)
  - Resolves: bz#1073728
    (progress bar doesn't display when converting with -p)
  - Resolves: bz#1073774
    (e1000 ROM cause migrate fail  from RHEL6.5 host to RHEL7.0 host)
  - Resolves: bz#990989
    (backport inline header virtio-net optimization)
  - Resolves: bz#993429
    (kvm: test maximum number of vcpus supported (rhel7))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-54.el7
changelog:
  - kvm-qdev-monitor-Set-properties-after-parent-is-assigned.patch [bz#1046248]
  - kvm-block-Update-image-size-in-bdrv_invalidate_cache.patch [bz#1048575]
  - kvm-qcow2-Keep-option-in-qcow2_invalidate_cache.patch [bz#1048575]
  - kvm-qcow2-Check-bs-drv-in-copy_sectors.patch [bz#1048575]
  - kvm-block-bs-drv-may-be-NULL-in-bdrv_debug_resume.patch [bz#1048575]
  - kvm-iotests-Test-corruption-during-COW-request.patch [bz#1048575]
  - Resolves: bz#1046248
    (qemu-kvm crash when send "info qtree" after hot plug a device with invalid addr)
  - Resolves: bz#1048575
    (Segmentation fault occurs after migrate guest(use scsi disk and add stress) to des machine)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-55.el7
changelog:
  - kvm-scsi-Change-scsi-sense-buf-size-to-252.patch [bz#1058173]
  - kvm-scsi-Fix-migration-of-scsi-sense-data.patch [bz#1058173]
  - Resolves: bz#1058173
    (qemu-kvm core dump booting guest with scsi-generic disk attached when using built-in iscsi driver)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-56.el7
changelog:
  - kvm-configure-Fix-bugs-preventing-Ceph-inclusion.patch [bz#1078809]
  - Resolves: bz#1078809
    (can not boot qemu-kvm-rhev with rbd image)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-57.el7
changelog:
  - kvm-virtio-net-fix-guest-triggerable-buffer-overrun.patch [bz#1078308]
  - Resolves: bz#1078308
    (EMBARGOED CVE-2014-0150 qemu: virtio-net: fix guest-triggerable buffer overrun [rhel-7.0])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-58.el7
changelog:
  - kvm-pc-Use-cpu64-rhel6-CPU-model-by-default-on-rhel6-mac.patch [bz#1080170]
  - kvm-target-i386-Copy-cpu64-rhel6-definition-into-qemu64.patch [bz#1078607 bz#1080170]
  - Resolves: bz#1080170
    (intel 82576 VF not work in windows 2008 x86 - Code 12 [TestOnly])
  - Resolves: bz#1080170
    (Default CPU model for rhel6.* machine-types is different from RHEL-6)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-59.el7
changelog:
  - kvm-qemu-iotests-add-.-check-cloop-support.patch [bz#1066691]
  - kvm-qemu-iotests-add-cloop-input-validation-tests.patch [bz#1066691]
  - kvm-block-cloop-validate-block_size-header-field-CVE-201.patch [bz#1079455]
  - kvm-block-cloop-prevent-offsets_size-integer-overflow-CV.patch [bz#1079320]
  - kvm-block-cloop-refuse-images-with-huge-offsets-arrays-C.patch [bz#1079455]
  - kvm-block-cloop-refuse-images-with-bogus-offsets-CVE-201.patch [bz#1079455]
  - kvm-size-off-by-one.patch [bz#1066691]
  - kvm-qemu-iotests-Support-for-bochs-format.patch [bz#1066691]
  - kvm-bochs-Unify-header-structs-and-make-them-QEMU_PACKED.patch [bz#1066691]
  - kvm-bochs-Use-unsigned-variables-for-offsets-and-sizes-C.patch [bz#1079339]
  - kvm-bochs-Check-catalog_size-header-field-CVE-2014-0143.patch [bz#1079320]
  - kvm-bochs-Check-extent_size-header-field-CVE-2014-0142.patch [bz#1079315]
  - kvm-bochs-Fix-bitmap-offset-calculation.patch [bz#1066691]
  - kvm-vpc-vhd-add-bounds-check-for-max_table_entries-and-b.patch [bz#1079455]
  - kvm-vpc-Validate-block-size-CVE-2014-0142.patch [bz#1079315]
  - kvm-vdi-add-bounds-checks-for-blocks_in_image-and-disk_s.patch [bz#1079455]
  - kvm-vhdx-Bounds-checking-for-block_size-and-logical_sect.patch [bz#1079346]
  - kvm-curl-check-data-size-before-memcpy-to-local-buffer.-.patch [bz#1079455]
  - kvm-qcow2-Check-header_length-CVE-2014-0144.patch [bz#1079455]
  - kvm-qcow2-Check-backing_file_offset-CVE-2014-0144.patch [bz#1079455]
  - kvm-qcow2-Check-refcount-table-size-CVE-2014-0144.patch [bz#1079455]
  - kvm-qcow2-Validate-refcount-table-offset.patch [bz#1066691]
  - kvm-qcow2-Validate-snapshot-table-offset-size-CVE-2014-0.patch [bz#1079455]
  - kvm-qcow2-Validate-active-L1-table-offset-and-size-CVE-2.patch [bz#1079455]
  - kvm-qcow2-Fix-backing-file-name-length-check.patch [bz#1066691]
  - kvm-qcow2-Don-t-rely-on-free_cluster_index-in-alloc_refc.patch [bz#1079339]
  - kvm-qcow2-Avoid-integer-overflow-in-get_refcount-CVE-201.patch [bz#1079320]
  - kvm-qcow2-Check-new-refcount-table-size-on-growth.patch [bz#1066691]
  - kvm-qcow2-Fix-types-in-qcow2_alloc_clusters-and-alloc_cl.patch [bz#1066691]
  - kvm-qcow2-Protect-against-some-integer-overflows-in-bdrv.patch [bz#1066691]
  - kvm-qcow2-Fix-new-L1-table-size-check-CVE-2014-0143.patch [bz#1079320]
  - kvm-dmg-coding-style-and-indentation-cleanup.patch [bz#1066691]
  - kvm-dmg-prevent-out-of-bounds-array-access-on-terminator.patch [bz#1066691]
  - kvm-dmg-drop-broken-bdrv_pread-loop.patch [bz#1066691]
  - kvm-dmg-use-appropriate-types-when-reading-chunks.patch [bz#1066691]
  - kvm-dmg-sanitize-chunk-length-and-sectorcount-CVE-2014-0.patch [bz#1079325]
  - kvm-dmg-use-uint64_t-consistently-for-sectors-and-length.patch [bz#1066691]
  - kvm-dmg-prevent-chunk-buffer-overflow-CVE-2014-0145.patch [bz#1079325]
  - kvm-block-vdi-bounds-check-qemu-io-tests.patch [bz#1066691]
  - kvm-block-Limit-request-size-CVE-2014-0143.patch [bz#1079320]
  - kvm-qcow2-Fix-copy_sectors-with-VM-state.patch [bz#1066691]
  - kvm-qcow2-Fix-NULL-dereference-in-qcow2_open-error-path-.patch [bz#1079333]
  - kvm-qcow2-Fix-L1-allocation-size-in-qcow2_snapshot_load_.patch [bz#1079325]
  - kvm-qcow2-Check-maximum-L1-size-in-qcow2_snapshot_load_t.patch [bz#1079320]
  - kvm-qcow2-Limit-snapshot-table-size.patch [bz#1066691]
  - kvm-parallels-Fix-catalog-size-integer-overflow-CVE-2014.patch [bz#1079320]
  - kvm-parallels-Sanity-check-for-s-tracks-CVE-2014-0142.patch [bz#1079315]
  - kvm-fix-machine-check-propagation.patch [bz#740107]
  - Resolves: bz#1066691
    (qemu-kvm: include leftover patches from block layer security audit)
  - Resolves: bz#1079315
    (CVE-2014-0142 qemu-kvm: qemu: crash by possible division by zero [rhel-7.0])
  - Resolves: bz#1079320
    (CVE-2014-0143 qemu-kvm: Qemu: block: multiple integer overflow flaws [rhel-7.0])
  - Resolves: bz#1079325
    (CVE-2014-0145 qemu-kvm: Qemu: prevent possible buffer overflows [rhel-7.0])
  - Resolves: bz#1079333
    (CVE-2014-0146 qemu-kvm: Qemu: qcow2: NULL dereference in qcow2_open() error path [rhel-7.0])
  - Resolves: bz#1079339
    (CVE-2014-0147 qemu-kvm: Qemu: block: possible crash due signed types or logic error [rhel-7.0])
  - Resolves: bz#1079346
    (CVE-2014-0148 qemu-kvm: Qemu: vhdx: bounds checking for block_size and logical_sector_size [rhel-7.0])
  - Resolves: bz#1079455
    (CVE-2014-0144 qemu-kvm: Qemu: block: missing input validation [rhel-7.0])
  - Resolves: bz#740107
    ([Hitachi 7.0 FEAT]  KVM: MCA Recovery for KVM guest OS memory)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-60.el7
changelog:
  - kvm-qcow2-fix-dangling-refcount-table-entry.patch [bz#1081793]
  - kvm-qcow2-link-all-L2-meta-updates-in-preallocate.patch [bz#1081393]
  - Resolves: bz#1081393
    (qemu-img will prompt that 'leaked clusters were found' while creating images with '-o preallocation=metadata,cluster_size<=1024')
  - Resolves: bz#1081793
    (qemu-img core dumped when creating a qcow2 image base on block device(iscsi or libiscsi))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-61.el7
changelog:
  - kvm-iscsi-fix-indentation.patch [bz#1083413]
  - kvm-iscsi-correctly-propagate-errors-in-iscsi_open.patch [bz#1083413]
  - kvm-block-iscsi-query-for-supported-VPD-pages.patch [bz#1083413]
  - kvm-block-iscsi-fix-segfault-if-writesame-fails.patch [bz#1083413]
  - kvm-iscsi-recognize-invalid-field-ASCQ-from-WRITE-SAME-c.patch [bz#1083413]
  - kvm-iscsi-ignore-flushes-on-scsi-generic-devices.patch [bz#1083413]
  - kvm-iscsi-always-query-max-WRITE-SAME-length.patch [bz#1083413]
  - kvm-iscsi-Don-t-set-error-if-already-set-in-iscsi_do_inq.patch [bz#1083413]
  - kvm-iscsi-Remember-to-set-ret-for-iscsi_open-in-error-ca.patch [bz#1083413]
  - kvm-qemu_loadvm_state-shadow-SeaBIOS-for-VM-incoming-fro.patch [bz#1027565]
  - kvm-uhci-UNfix-irq-routing-for-RHEL-6-machtypes-RHEL-onl.patch [bz#1085701]
  - kvm-ide-Correct-improper-smart-self-test-counter-reset-i.patch [bz#1087980]
  - Resolves: bz#1027565
    (fail to reboot guest after migration from RHEL6.5 host to RHEL7.0 host)
  - Resolves: bz#1083413
    (qemu-kvm: iSCSI: Failure. SENSE KEY:ILLEGAL_REQUEST(5) ASCQ:INVALID_FIELD_IN_CDB(0x2400))
  - Resolves: bz#1085701
    (Guest hits call trace migrate from RHEL6.5 to RHEL7.0 host with -M 6.1 & balloon & uhci device)
  - Resolves: bz#1087980
    (CVE-2014-2894 qemu-kvm: QEMU: out of bounds buffer accesses, guest triggerable via IDE SMART [rhel-7.1])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-62.el7
changelog:
  - kvm-pc-add-hot_add_cpu-callback-to-all-machine-types.patch [bz#1094285]
  - Resolves: bz#1094285
    (Hot plug CPU not working with RHEL6  machine types running on RHEL7 host.)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-63.el7
changelog:
  - kvm-char-restore-read-callback-on-a-reattached-hotplug-c.patch [bz#1038914]
  - kvm-qcow2-Free-preallocated-zero-clusters.patch [bz#1052093]
  - kvm-qemu-iotests-Discard-preallocated-zero-clusters.patch [bz#1052093]
  - kvm-XBZRLE-Fix-qemu-crash-when-resize-the-xbzrle-cache.patch [bz#1066338]
  - kvm-Provide-init-function-for-ram-migration.patch [bz#1066338]
  - kvm-Init-the-XBZRLE.lock-in-ram_mig_init.patch [bz#1066338]
  - kvm-XBZRLE-Fix-one-XBZRLE-corruption-issues.patch [bz#1066338]
  - kvm-Count-used-RAMBlock-pages-for-migration_dirty_pages.patch [bz#1074913]
  - kvm-virtio-net-fix-buffer-overflow-on-invalid-state-load.patch [bz#1095678]
  - kvm-virtio-net-out-of-bounds-buffer-write-on-invalid-sta.patch [bz#1095690]
  - kvm-virtio-net-out-of-bounds-buffer-write-on-load.patch [bz#1095685]
  - kvm-virtio-out-of-bounds-buffer-write-on-invalid-state-l.patch [bz#1095695]
  - kvm-virtio-avoid-buffer-overrun-on-incoming-migration.patch [bz#1095738]
  - kvm-virtio-scsi-fix-buffer-overrun-on-invalid-state-load.patch [bz#1095742]
  - kvm-virtio-validate-config_len-on-load.patch [bz#1095783]
  - kvm-virtio-validate-num_sg-when-mapping.patch [bz#1095766]
  - kvm-virtio-allow-mapping-up-to-max-queue-size.patch [bz#1095766]
  - kvm-usb-sanity-check-setup_index-setup_len-in-post_load.patch [bz#1095747]
  - kvm-usb-sanity-check-setup_index-setup_len-in-post_l2.patch [bz#1095747]
  - kvm-vmstate-reduce-code-duplication.patch [bz#1095716]
  - kvm-vmstate-add-VMS_MUST_EXIST.patch [bz#1095716]
  - kvm-vmstate-add-VMSTATE_VALIDATE.patch [bz#1095716]
  - kvm-hpet-fix-buffer-overrun-on-invalid-state-load.patch [bz#1095707]
  - kvm-hw-pci-pcie_aer.c-fix-buffer-overruns-on-invalid-sta.patch [bz#1095716]
  - kvm-usb-fix-up-post-load-checks.patch [bz#1096829]
  - kvm-qcow-correctly-propagate-errors.patch [bz#1097230]
  - kvm-qcow1-Make-padding-in-the-header-explicit.patch [bz#1097230]
  - kvm-qcow1-Check-maximum-cluster-size.patch [bz#1097230]
  - kvm-qcow1-Validate-L2-table-size-CVE-2014-0222.patch [bz#1097230]
  - kvm-qcow1-Validate-image-size-CVE-2014-0223.patch [bz#1097237]
  - kvm-qcow1-Stricter-backing-file-length-check.patch [bz#1097237]
  - Resolves: bz#1038914
    (Guest can't receive any character transmitted from host after hot unplugging virtserialport then hot plugging again)
  - Resolves: bz#1052093
    (qcow2 corruptions (leaked clusters after installing a rhel7 guest using virtio_scsi))
  - Resolves: bz#1066338
    (Reduce the migrate cache size during migration causes qemu segment fault)
  - Resolves: bz#1074913
    (migration can not finish with 1024k 'remaining ram' left after hotunplug 4 nics)
  - Resolves: bz#1095678
    (CVE-2013-4148 qemu-kvm: qemu: virtio-net: buffer overflow on invalid state load [rhel-7.1])
  - Resolves: bz#1095685
    (CVE-2013-4149 qemu-kvm: qemu: virtio-net: out-of-bounds buffer write on load [rhel-7.1])
  - Resolves: bz#1095690
    (CVE-2013-4150 qemu-kvm: qemu: virtio-net: out-of-bounds buffer write on invalid state load [rhel-7.1])
  - Resolves: bz#1095695
    (CVE-2013-4151 qemu-kvm: qemu: virtio: out-of-bounds buffer write on invalid state load [rhel-7.1])
  - Resolves: bz#1095707
    (CVE-2013-4527 qemu-kvm: qemu: hpet: buffer overrun on invalid state load [rhel-7.1])
  - Resolves: bz#1095716
    (CVE-2013-4529 qemu-kvm: qemu: hw/pci/pcie_aer.c: buffer overrun on invalid state load [rhel-7.1])
  - Resolves: bz#1095738
    (CVE-2013-6399 qemu-kvm: qemu: virtio: buffer overrun on incoming migration [rhel-7.1])
  - Resolves: bz#1095742
    (CVE-2013-4542 qemu-kvm: qemu: virtio-scsi: buffer overrun on invalid state load [rhel-7.1])
  - Resolves: bz#1095747
    (CVE-2013-4541 qemu-kvm: qemu: usb: insufficient sanity checking of setup_index+setup_len in post_load [rhel-7.1])
  - Resolves: bz#1095766
    (CVE-2013-4535 CVE-2013-4536 qemu-kvm: qemu: virtio: insufficient validation of num_sg when mapping [rhel-7.1])
  - Resolves: bz#1095783
    (CVE-2014-0182 qemu-kvm: qemu: virtio: out-of-bounds buffer write on state load with invalid config_len [rhel-7.1])
  - Resolves: bz#1096829
    (CVE-2014-3461 qemu-kvm: Qemu: usb: fix up post load checks [rhel-7.1])
  - Resolves: bz#1097230
    (CVE-2014-0222 qemu-kvm: Qemu: qcow1: validate L2 table size to avoid integer overflows [rhel-7.1])
  - Resolves: bz#1097237
    (CVE-2014-0223 qemu-kvm: Qemu: qcow1: validate image size to avoid out-of-bounds memory access [rhel-7.1])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-64.el7
changelog:
  - kvm-zero-initialize-KVM_SET_GSI_ROUTING-input.patch [bz#1098976]
  - kvm-skip-system-call-when-msi-route-is-unchanged.patch [bz#1098976]
  - Resolves: bz#1098976
    (2x RHEL 5.10 VM running on RHEL 7 KVM have low TCP_STREAM throughput)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-65.el7
changelog:
  - kvm-Allow-mismatched-virtio-config-len.patch [bz#1113009]
  - Resolves: bz#1113009
    (Migration failed with virtio-blk from RHEL6.5.0 host to RHEL7.0 host)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-66.el7
changelog:
  - kvm-xhci-fix-overflow-in-usb_xhci_post_load.patch [bz#1074219]
  - kvm-migration-qmp_migrate-keep-working-after-syntax-erro.patch [bz#1086598]
  - kvm-seccomp-add-shmctl-mlock-and-munlock-to-the-syscall-.patch [bz#1026314]
  - kvm-exit-when-no-kvm-and-vcpu-count-160.patch [bz#1076326]
  - kvm-Disallow-outward-migration-while-awaiting-incoming-m.patch [bz#1086987]
  - kvm-block-Ignore-duplicate-or-NULL-format_name-in-bdrv_i.patch [bz#1088695 bz#1093983]
  - kvm-block-vhdx-account-for-identical-header-sections.patch [bz#1097020]
  - kvm-aio-Fix-use-after-free-in-cancellation-path.patch [bz#1095877]
  - kvm-scsi-disk-Improve-error-messager-if-can-t-get-versio.patch [bz#1021788]
  - kvm-scsi-Improve-error-messages-more.patch [bz#1021788]
  - kvm-memory-Don-t-call-memory_region_update_coalesced_ran.patch [bz#1096645]
  - kvm-kvmclock-Ensure-time-in-migration-never-goes-backwar.patch [bz#1098602]
  - kvm-kvmclock-Ensure-proper-env-tsc-value-for-kvmclock_cu.patch [bz#1098602]
  - Resolves: bz#1021788
    (the error message "scsi generic interface too old" is wrong more often than not)
  - Resolves: bz#1026314
    (qemu-kvm hang when use '-sandbox on'+'vnc'+'hda')
  - Resolves: bz#1074219
    (qemu core dump when install a RHEL.7 guest(xhci) with migration)
  - Resolves: bz#1076326
    (qemu-kvm does not quit when booting guest w/ 161 vcpus and "-no-kvm")
  - Resolves: bz#1086598
    (migrate_cancel wont take effect on previouly wrong migrate -d cmd)
  - Resolves: bz#1086987
    (src qemu crashed when starting migration in inmigrate mode)
  - Resolves: bz#1088695
    (there are four "gluster" in qemu-img supported format list)
  - Resolves: bz#1093983
    (there are three "nbd" in qemu-img supported format list)
  - Resolves: bz#1095877
    (segmentation fault in qemu-kvm due to use-after-free of a SCSIGenericReq (host device pass-through))
  - Resolves: bz#1096645
    ([FJ7.0 Bug] RHEL7.0 guest attaching 150 or more virtio-blk disks fails to start up)
  - Resolves: bz#1097020
    ([RFE] qemu-img: Add/improve Disk2VHD tools creating VHDX images)
  - Resolves: bz#1098602
    (kvmclock: Ensure time in migration never goes backward (backport))


author: Jeff E. Nelson <jen@redhat.com> - 1.5.3-67.el7
changelog:
  - kvm-vl.c-Output-error-on-invalid-machine-type.patch [bz#990724]
  - kvm-migration-dump-vmstate-info-as-a-json-file-for-stati.patch [bz#1118707]
  - kvm-vmstate-static-checker-script-to-validate-vmstate-ch.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-add-dump1-and-dump2-fil.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-incompat-machine-types.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-add-version-error-in-ma.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-version-mismatch-inside.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-minimum_version_id-chec.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-remove-a-section.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-remove-a-field.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-remove-last-field-in-a-.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-change-description-name.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-remove-Fields.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-remove-Description.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-remove-Description-insi.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-remove-a-subsection.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-remove-Subsections.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-add-substructure-for-us.patch [bz#1118707]
  - kvm-tests-vmstate-static-checker-add-size-mismatch-insid.patch [bz#1118707]
  - kvm-aio-fix-qemu_bh_schedule-bh-ctx-race-condition.patch [bz#1116728]
  - kvm-block-Improve-driver-whitelist-checks.patch [bz#999789]
  - kvm-vmdk-Fix-format-specific-information-create-type-for.patch [bz#1029271]
  - kvm-virtio-pci-Report-an-error-when-msix-vectors-init-fa.patch [bz#1095645]
  - kvm-scsi-Report-error-when-lun-number-is-in-use.patch [bz#1096576]
  - kvm-util-Split-out-exec_dir-from-os_find_datadir.patch [bz#1017685]
  - kvm-rules.mak-fix-obj-to-a-real-relative-path.patch [bz#1017685]
  - kvm-rules.mak-allow-per-object-cflags-and-libs.patch [bz#1017685]
  - kvm-block-use-per-object-cflags-and-libs.patch [bz#1017685]
  - kvm-vmdk-Fix-creating-big-description-file.patch [bz#1039791]
  - Resolves: bz#1017685
    (Gluster etc. should not be a dependency of vscclient and libcacard)
  - Resolves: bz#1029271
    (Format specific information (create type) was wrong when create it specified subformat='streamOptimized')
  - Resolves: bz#1039791
    (qemu-img creates truncated VMDK image with subformat=twoGbMaxExtentFlat)
  - Resolves: bz#1095645
    (vectors of virtio-scsi-pci will be 0 when set vectors>=129)
  - Resolves: bz#1096576
    (QEMU core dumped when boot up two scsi-hd disk on the same virtio-scsi-pci controller in Intel host)
  - Resolves: bz#1116728
    (Backport qemu_bh_schedule() race condition fix)
  - Resolves: bz#1118707
    (VMstate static checker: backport -dump-vmstate feature to export json-encoded vmstate info)
  - Resolves: bz#990724
    (qemu-kvm failing when invalid machine type is provided)
  - Resolves: bz#999789
    (qemu should give a more friendly prompt when didn't specify read-only for VMDK format disk)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-68.el7
changelog:
  - kvm-virtio-net-Do-not-filter-VLANs-without-F_CTRL_VLAN.patch [bz#1065724]
  - kvm-virtio-net-add-vlan-receive-state-to-RxFilterInfo.patch [bz#1065724]
  - kvm-virtio-rng-check-return-value-of-virtio_load.patch [bz#1116941]
  - kvm-qapi-treat-all-negative-return-of-strtosz_suffix-as-.patch [bz#1074403]
  - Resolves: bz#1065724
    (rx filter incorrect when guest disables VLAN filtering)
  - Resolves: bz#1074403
    (qemu-kvm can not give any warning hint when set sndbuf with negative value)
  - Resolves: bz#1116941
    (Return value of virtio_load not checked in virtio_rng_load)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-69.el7
changelog:
  - kvm-rdma-bug-fixes.patch [bz#1107821]
  - kvm-virtio-serial-report-frontend-connection-state-via-m.patch [bz#1122151]
  - kvm-char-report-frontend-open-closed-state-in-query-char.patch [bz#1122151]
  - kvm-acpi-fix-tables-for-no-hpet-configuration.patch [bz#1129552]
  - kvm-mirror-Fix-resource-leak-when-bdrv_getlength-fails.patch [bz#1130603]
  - kvm-blockjob-Add-block_job_yield.patch [bz#1130603]
  - kvm-mirror-Go-through-ready-complete-process-for-0-len-i.patch [bz#1130603]
  - kvm-qemu-iotests-Test-BLOCK_JOB_READY-event-for-0Kb-imag.patch [bz#1130603]
  - kvm-block-make-top-argument-to-block-commit-optional.patch [bz#1130603]
  - kvm-qemu-iotests-Test-0-length-image-for-mirror.patch [bz#1130603]
  - kvm-mirror-Fix-qiov-size-for-short-requests.patch [bz#1130603]
  - Resolves: bz#1107821
    (rdma migration: seg if destination isn't listening)
  - Resolves: bz#1122151
    (Pass close from qemu-ga)
  - Resolves: bz#1129552
    (backport "acpi: fix tables for no-hpet configuration")
  - Resolves: bz#1130603
    (advertise active commit to libvirt)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-70.el7
changelog:
  - kvm-Enforce-stack-protector-usage.patch [bz#1064260]
  - kvm-pc-increase-maximal-VCPU-count-to-240.patch [bz#1134408]
  - kvm-gluster-Add-discard-support-for-GlusterFS-block-driv.patch [bz#1136534]
  - kvm-gluster-default-scheme-to-gluster-and-host-to-localh.patch [bz#1088150]
  - kvm-qdev-properties-system.c-Allow-vlan-or-netdev-for-de.patch [bz#996011]
  - kvm-vl-process-object-after-other-backend-options.patch [bz#1128095]
  - Resolves: bz#1064260
    (Handle properly --enable-fstack-protector option)
  - Resolves: bz#1088150
    (qemu-img coredumpd when try to create a gluster format image)
  - Resolves: bz#1128095
    (chardev 'chr0' isn't initialized when we try to open rng backend)
  - Resolves: bz#1134408
    ([HP 7.1 FEAT] Increase qemu-kvm's VCPU limit to 240)
  - Resolves: bz#1136534
    (glusterfs backend does not support discard)
  - Resolves: bz#996011
    (vlan and queues options cause core dumped when qemu-kvm process quit(or ctrl+c))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-71.el7
changelog:
  - kvm-spice-move-qemu_spice_display_-from-spice-graphics-t.patch [bz#1054077]
  - kvm-spice-move-spice_server_vm_-start-stop-calls-into-qe.patch [bz#1054077]
  - kvm-spice-stop-server-for-qxl-hard-reset.patch [bz#1054077]
  - kvm-qemu-Adjust-qemu-wakeup.patch [bz#1064156]
  - kvm-vmstate_xhci_event-fix-unterminated-field-list.patch [bz#1122147]
  - kvm-vmstate_xhci_event-bug-compat-with-RHEL-7.0-RHEL-onl.patch [bz#1122147]
  - kvm-pflash_cfi01-write-flash-contents-to-bdrv-on-incomin.patch [bz#1139702]
  - kvm-ide-test-Add-enum-value-for-DEV.patch [bz#1123372]
  - kvm-ide-test-Add-FLUSH-CACHE-test-case.patch [bz#1123372]
  - kvm-ide-Fix-segfault-when-flushing-a-device-that-doesn-t.patch [bz#1123372]
  - kvm-IDE-Fill-the-IDENTIFY-request-consistently.patch [bz#852348]
  - kvm-ide-Add-resize-callback-to-ide-core.patch [bz#852348]
  - Resolves: bz#1054077
    (qemu crash when reboot win7 guest with spice display)
  - Resolves: bz#1064156
    ([qxl] The guest show black screen while resumed guest which managedsaved in pmsuspended status.)
  - Resolves: bz#1122147
    (CVE-2014-5263 vmstate_xhci_event: fix unterminated field list)
  - Resolves: bz#1123372
    (qemu-kvm crashed when doing iofuzz testing)
  - Resolves: bz#1139702
    (pflash (UEFI varstore) migration shortcut for libvirt [RHEL])
  - Resolves: bz#852348
    (fail to block_resize local data disk with IDE/AHCI disk_interface)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-72.el7
changelog:
  - kvm-vbe-make-bochs-dispi-interface-return-the-correct-me.patch [bz#1139118]
  - kvm-vbe-rework-sanity-checks.patch [bz#1139118]
  - kvm-spice-display-add-display-channel-id-to-the-debug-me.patch [bz#1139118]
  - kvm-spice-make-sure-we-don-t-overflow-ssd-buf.patch [bz#1139118]
  - Resolves: bz#1139118
    (CVE-2014-3615 qemu-kvm: Qemu: crash when guest sets high resolution [rhel-7.1])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-73.el7
changelog:
  - kvm-scsi-disk-fix-bug-in-scsi_block_new_request-introduc.patch [bz#1105880]
  - Resolves: bz#1105880
    (bug in scsi_block_new_request() function introduced by upstream commit 137745c5c60f083ec982fe9e861e8c16ebca1ba8)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-74.el7
changelog:
  - kvm-ide-Add-wwn-support-to-IDE-ATAPI-drive.patch [bz#1131316]
  - kvm-vmdk-Allow-vmdk_create-to-work-with-protocol.patch [bz#1098086]
  - kvm-block-make-vdi-bounds-check-match-upstream.patch [bz#1098086]
  - kvm-vdi-say-why-an-image-is-bad.patch [bz#1098086]
  - kvm-block-do-not-abuse-EMEDIUMTYPE.patch [bz#1098086]
  - kvm-cow-correctly-propagate-errors.patch [bz#1098086]
  - kvm-block-Use-correct-width-in-format-strings.patch [bz#1098086]
  - kvm-vdi-remove-double-conversion.patch [bz#1098086]
  - kvm-block-vdi-Error-out-immediately-in-vdi_create.patch [bz#1098086]
  - kvm-vpc-Implement-.bdrv_has_zero_init.patch [bz#1098086]
  - kvm-block-vpc-use-QEMU_PACKED-for-on-disk-structures.patch [bz#1098086]
  - kvm-block-allow-bdrv_unref-to-be-passed-NULL-pointers.patch [bz#1098086]
  - kvm-block-vdi-use-block-layer-ops-in-vdi_create-instead-.patch [bz#1098086]
  - kvm-block-use-the-standard-ret-instead-of-result.patch [bz#1098086]
  - kvm-block-vpc-use-block-layer-ops-in-vpc_create-instead-.patch [bz#1098086]
  - kvm-block-iotest-update-084-to-test-static-VDI-image-cre.patch [bz#1098086]
  - kvm-block-add-helper-function-to-determine-if-a-BDS-is-i.patch [bz#1122925]
  - kvm-block-extend-block-commit-to-accept-a-string-for-the.patch [bz#1122925]
  - kvm-block-add-backing-file-option-to-block-stream.patch [bz#1122925]
  - kvm-block-add-__com.redhat_change-backing-file-qmp-comma.patch [bz#1122925]
  - Resolves: bz#1098086
    (RFE: Supporting creating vmdk/vdi/vpc format disk with protocols (glusterfs))
  - Resolves: bz#1122925
    (Maintain relative path to backing file image during live merge (block-commit))
  - Resolves: bz#1131316
    (fail to specify wwn for virtual IDE CD-ROM)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-75.el7
changelog:
  - kvm-target-i386-Broadwell-CPU-model.patch [bz#1116117]
  - kvm-pc-Add-Broadwell-CPUID-compatibility-bits.patch [bz#1116117]
  - kvm-virtio-balloon-fix-integer-overflow-in-memory-stats-.patch [bz#1142290]
  - Resolves: bz#1116117
    ([Intel 7.1 FEAT] Broadwell new instructions support for KVM - qemu-kvm)
  - Resolves: bz#1142290
    (guest is stuck when setting balloon memory with large guest-stats-polling-interval)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-76.el7
changelog:
  - kvm-usb-hcd-xhci-QOM-Upcast-Sweep.patch [bz#980747]
  - kvm-usb-hcd-xhci-QOM-parent-field-cleanup.patch [bz#980747]
  - kvm-uhci-egsm-fix.patch [bz#1046873]
  - kvm-usb-redir-fix-use-after-free.patch [bz#1046574 bz#1088116]
  - kvm-xhci-remove-leftover-debug-printf.patch [bz#980833]
  - kvm-xhci-add-tracepoint-for-endpoint-state-changes.patch [bz#980833]
  - kvm-xhci-add-port-to-slot_address-tracepoint.patch [bz#980833]
  - kvm-usb-parallelize-usb3-streams.patch [bz#1075846]
  - kvm-xhci-Init-a-transfers-xhci-slotid-and-epid-member-on.patch [bz#1075846]
  - kvm-xhci-Add-xhci_epid_to_usbep-helper-function.patch [bz#980833]
  - kvm-xhci-Fix-memory-leak-on-xhci_disable_ep.patch [bz#980833]
  - kvm-usb-Also-reset-max_packet_size-on-ep_reset.patch [bz#1075846]
  - kvm-usb-Fix-iovec-memleak-on-combined-packet-free.patch [bz#1075846]
  - kvm-usb-hcd-xhci-Remove-unused-sstreamsm-member-from-XHC.patch [bz#980747]
  - kvm-usb-hcd-xhci-Remove-unused-cancelled-member-from-XHC.patch [bz#980747]
  - kvm-usb-hcd-xhci-Report-completion-of-active-transfer-wi.patch [bz#980747]
  - kvm-usb-hcd-xhci-Update-endpoint-context-dequeue-pointer.patch [bz#980747]
  - kvm-xhci-Add-a-few-missing-checks-for-disconnected-devic.patch [bz#980833]
  - kvm-usb-Add-max_streams-attribute-to-endpoint-info.patch [bz#1111450]
  - kvm-usb-Add-usb_device_alloc-free_streams.patch [bz#1111450]
  - kvm-xhci-Call-usb_device_alloc-free_streams.patch [bz#980833]
  - kvm-uhci-invalidate-queue-on-device-address-changes.patch [bz#1111450]
  - kvm-xhci-iso-fix-time-calculation.patch [bz#949385]
  - kvm-xhci-iso-allow-for-some-latency.patch [bz#949385]
  - kvm-xhci-switch-debug-printf-to-tracepoint.patch [bz#980747]
  - kvm-xhci-use-DPRINTF-instead-of-fprintf-stderr.patch [bz#980833]
  - kvm-xhci-child-detach-fix.patch [bz#980833]
  - kvm-usb-add-usb_pick_speed.patch [bz#1075846]
  - kvm-xhci-make-port-reset-trace-point-more-verbose.patch [bz#980833]
  - kvm-usb-initialize-libusb_device-to-avoid-crash.patch [bz#1111450]
  - kvm-target-i386-get-CPL-from-SS.DPL.patch [bz#1097363]
  - kvm-trace-use-unique-Red-Hat-version-number-in-simpletra.patch [bz#1088112]
  - kvm-trace-add-pid-field-to-simpletrace-record.patch [bz#1088112]
  - kvm-simpletrace-add-support-for-trace-record-pid-field.patch [bz#1088112]
  - kvm-simpletrace-add-simpletrace.py-no-header-option.patch [bz#1088112]
  - kvm-trace-extract-stap_escape-function-for-reuse.patch [bz#1088112]
  - kvm-trace-add-tracetool-simpletrace_stap-format.patch [bz#1088112]
  - kvm-trace-install-simpletrace-SystemTap-tapset.patch [bz#1088112]
  - kvm-trace-install-trace-events-file.patch [bz#1088112]
  - kvm-trace-add-SystemTap-init-scripts-for-simpletrace-bri.patch [bz#1088112]
  - kvm-simpletrace-install-simpletrace.py.patch [bz#1088112]
  - kvm-trace-add-systemtap-initscript-README-file-to-RPM.patch [bz#1088112]
  - kvm-rdma-Fix-block-during-rdma-migration.patch [bz#1152969]
  - Resolves: bz#1046574
    (fail to passthrough the USB speaker redirected from usb-redir with xhci controller)
  - Resolves: bz#1046873
    (fail to be recognized the hotpluging usb-storage device with xhci controller in win2012R2 guest)
  - Resolves: bz#1075846
    (qemu-kvm core dumped when hotplug/unhotplug USB3.0 device multi times)
  - Resolves: bz#1088112
    ([Fujitsu 7.1 FEAT]:QEMU: capturing trace data all the time using ftrace-based tracing)
  - Resolves: bz#1088116
    (qemu crash when device_del usb-redir)
  - Resolves: bz#1097363
    (qemu ' KVM internal error. Suberror: 1'  when  query cpu frequently during pxe boot in Intel "Q95xx" host)
  - Resolves: bz#1111450
    (Guest crash when hotplug usb while disable virt_use_usb)
  - Resolves: bz#1152969
    (Qemu-kvm got stuck when migrate to wrong RDMA ip)
  - Resolves: bz#949385
    (passthrough USB speaker to win2012 guest fail to work well)
  - Resolves: bz#980747
    (flood with 'xhci: wrote doorbell while xHC stopped or paused' when redirected USB Webcam from usb-host with xHCI controller)
  - Resolves: bz#980833
    (xhci: FIXME: endpoint stopped w/ xfers running, data might be lost)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-77.el7
changelog:
  - kvm-seccomp-add-semctl-to-the-syscall-whitelist.patch [bz#1026314]
  - kvm-Revert-kvmclock-Ensure-proper-env-tsc-value-for-kvmc.patch [bz#1098602 bz#1130428]
  - kvm-Revert-kvmclock-Ensure-time-in-migration-never-goes-.patch [bz#1098602 bz#1130428]
  - kvm-Introduce-cpu_clean_all_dirty.patch [bz#1098602 bz#1130428]
  - kvm-kvmclock-Ensure-proper-env-tsc-value-for-kvmclock.v2.patch [bz#1098602 bz#1130428]
  - kvm-kvmclock-Ensure-time-in-migration-never-goes-back.v2.patch [bz#1098602 bz#1130428]
  - Resolves: bz#1026314
    (BUG: qemu-kvm hang when use '-sandbox on'+'vnc'+'hda')
  - Resolves: bz#1098602
    (kvmclock: Ensure time in migration never goes backward (backport))
  - Resolves: bz#1130428
    (After migration of RHEL7.1 guest with "-vga qxl", GUI console is hang)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-78.el7
changelog:
  - kvm-slirp-udp-fix-NULL-pointer-dereference-because-of-un.patch [bz#1144820]
  - kvm-hw-pci-fix-error-flow-in-pci-multifunction-init.patch [bz#1049734]
  - kvm-rhel-Drop-machine-type-pc-q35-rhel7.0.0.patch [bz#1111107]
  - kvm-virtio-scsi-Plug-memory-leak-on-virtio_scsi_push_eve.patch [bz#1088822]
  - kvm-virtio-scsi-Report-error-if-num_queues-is-0-or-too-l.patch [bz#1089606]
  - kvm-virtio-scsi-Fix-memory-leak-when-realize-failed.patch [bz#1089606]
  - kvm-virtio-scsi-Fix-num_queue-input-validation.patch [bz#1089606]
  - kvm-Revert-linux-aio-use-event-notifiers.patch [bz#1104748]
  - kvm-specfile-Require-glusterfs-api-3.6.patch [bz#1155518]
  - Resolves: bz#1049734
    (PCI: QEMU crash on illegal operation: attaching a function to a non multi-function device)
  - Resolves: bz#1088822
    (hot-plug a virtio-scsi disk via 'blockdev-add' always cause QEMU quit)
  - Resolves: bz#1089606
    (QEMU will not reject invalid number of queues (num_queues = 0) specified for virtio-scsi)
  - Resolves: bz#1104748
    (48% reduction in IO performance for KVM guest, io=native)
  - Resolves: bz#1111107
    (Remove Q35 machine type from qemu-kvm)
  - Resolves: bz#1144820
    (CVE-2014-3640 qemu-kvm: qemu: slirp: NULL pointer deref in sosendto() [rhel-7.1])
  - Resolves: bz#1155518
    (qemu-kvm: undefined symbol: glfs_discard_async)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-79.el7
changelog:
  - kvm-libcacard-link-against-qemu-error.o-for-error_report.patch [bz#1088176]
  - kvm-error-Add-error_abort.patch [bz#1088176]
  - kvm-blockdev-Fail-blockdev-add-with-encrypted-images.patch [bz#1088176]
  - kvm-blockdev-Fix-NULL-pointer-dereference-in-blockdev-ad.patch [bz#1088176]
  - kvm-qemu-iotests-Test-a-few-blockdev-add-error-cases.patch [bz#1088176]
  - kvm-block-Add-errp-to-bdrv_new.patch [bz#1088176]
  - kvm-qemu-img-Avoid-duplicate-block-device-IDs.patch [bz#1088176]
  - kvm-block-Catch-duplicate-IDs-in-bdrv_new.patch [bz#1088176]
  - kvm-qemu-img-Allow-source-cache-mode-specification.patch [bz#1138691]
  - kvm-qemu-img-Allow-cache-mode-specification-for-amend.patch [bz#1138691]
  - kvm-qemu-img-clarify-src_cache-option-documentation.patch [bz#1138691]
  - kvm-qemu-img-fix-rebase-src_cache-option-documentation.patch [bz#1138691]
  - kvm-qemu-img-fix-img_compare-flags-error-path.patch [bz#1138691]
  - kvm-ac97-register-reset-via-qom.patch [bz#1141667]
  - kvm-virtio-blk-Factor-common-checks-out-of-virtio_blk_ha.patch [bz#1085232]
  - kvm-virtio-blk-Bypass-error-action-and-I-O-accounting-on.patch [bz#1085232]
  - kvm-virtio-blk-Treat-read-write-beyond-end-as-invalid.patch [bz#1085232]
  - kvm-ide-Treat-read-write-beyond-end-as-invalid.patch [bz#1085232]
  - kvm-ide-only-constrain-read-write-requests-to-drive-size.patch [bz#1085232]
  - Resolves: bz#1085232
    (Ilegal guest requests on block devices pause the VM)
  - Resolves: bz#1088176
    (QEMU fail to check whether duplicate ID for block device drive using 'blockdev-add' to hotplug)
  - Resolves: bz#1138691
    (Allow qemu-img to bypass the host cache (check, compare, convert, rebase, amend))
  - Resolves: bz#1141667
    (Qemu crashed if reboot guest after hot remove AC97 sound device)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-80.el7
changelog:
  - kvm-dump-RHEL-specific-fix-for-CPUState-bug-introduced-b.patch [bz#1161563]
  - kvm-dump-guest-memory-Check-for-the-correct-return-value.patch [bz#1157798]
  - kvm-dump-const-qualify-the-buf-of-WriteCoreDumpFunction.patch [bz#1157798]
  - kvm-dump-add-argument-to-write_elfxx_notes.patch [bz#1157798]
  - kvm-dump-add-API-to-write-header-of-flatten-format.patch [bz#1157798]
  - kvm-dump-add-API-to-write-vmcore.patch [bz#1157798]
  - kvm-dump-add-API-to-write-elf-notes-to-buffer.patch [bz#1157798]
  - kvm-dump-add-support-for-lzo-snappy.patch [bz#1157798]
  - kvm-RPM-spec-build-qemu-kvm-with-lzo-and-snappy-enabled-.patch [bz#1157798]
  - kvm-dump-add-members-to-DumpState-and-init-some-of-them.patch [bz#1157798]
  - kvm-dump-add-API-to-write-dump-header.patch [bz#1157798]
  - kvm-dump-add-API-to-write-dump_bitmap.patch [bz#1157798]
  - kvm-dump-add-APIs-to-operate-DataCache.patch [bz#1157798]
  - kvm-dump-add-API-to-write-dump-pages.patch [bz#1157798]
  - kvm-dump-Drop-qmp_dump_guest_memory-stub-and-build-for-a.patch [bz#1157798]
  - kvm-dump-make-kdump-compressed-format-available-for-dump.patch [bz#1157798]
  - kvm-Define-the-architecture-for-compressed-dump-format.patch [bz#1157798]
  - kvm-dump-add-query-dump-guest-memory-capability-command.patch [bz#1157798]
  - kvm-dump-Drop-pointless-error_is_set-DumpState-member-er.patch [bz#1157798]
  - kvm-dump-fill-in-the-flat-header-signature-more-pleasing.patch [bz#1157798]
  - kvm-dump-simplify-write_start_flat_header.patch [bz#1157798]
  - kvm-dump-eliminate-DumpState.page_shift-guest-s-page-shi.patch [bz#1157798]
  - kvm-dump-eliminate-DumpState.page_size-guest-s-page-size.patch [bz#1157798]
  - kvm-dump-select-header-bitness-based-on-ELF-class-not-EL.patch [bz#1157798]
  - kvm-dump-hoist-lzo_init-from-get_len_buf_out-to-dump_ini.patch [bz#1157798]
  - kvm-dump-simplify-get_len_buf_out.patch [bz#1157798]
  - kvm-rename-parse_enum_option-to-qapi_enum_parse-and-make.patch [bz#1087724]
  - kvm-qapi-introduce-PreallocMode-and-new-PreallocModes-fu.patch [bz#1087724]
  - kvm-raw-posix-Add-falloc-and-full-preallocation-option.patch [bz#1087724]
  - kvm-qcow2-Add-falloc-and-full-preallocation-option.patch [bz#1087724]
  - kvm-vga-fix-invalid-read-after-free.patch [bz#1161890]
  - kvm-Use-qemu-kvm-in-documentation-instead-of-qemu-system.patch [bz#1140618]
  - kvm-vnc-sanitize-bits_per_pixel-from-the-client.patch [bz#1157645]
  - kvm-spice-call-qemu_spice_set_passwd-during-init.patch [bz#1138639]
  - kvm-block-raw-posix-Try-both-FIEMAP-and-SEEK_HOLE.patch [bz#1160237]
  - kvm-block-raw-posix-Fix-disk-corruption-in-try_fiemap.patch [bz#1160237]
  - kvm-block-raw-posix-use-seek_hole-ahead-of-fiemap.patch [bz#1160237]
  - kvm-raw-posix-Fix-raw_co_get_block_status-after-EOF.patch [bz#1160237]
  - kvm-raw-posix-raw_co_get_block_status-return-value.patch [bz#1160237]
  - kvm-raw-posix-SEEK_HOLE-suffices-get-rid-of-FIEMAP.patch [bz#1160237]
  - kvm-raw-posix-The-SEEK_HOLE-code-is-flawed-rewrite-it.patch [bz#1160237]
  - Resolves: bz#1087724
    ([Fujitsu 7.1 FEAT]: qemu-img should use fallocate() system call for "preallocation=full" option)
  - Resolves: bz#1138639
    (fail to login spice session with password + expire time)
  - Resolves: bz#1140618
    (Should replace "qemu-system-i386" by "/usr/libexec/qemu-kvm" in manpage of qemu-kvm for our official qemu-kvm build)
  - Resolves: bz#1157645
    (CVE-2014-7815 qemu-kvm: qemu: vnc: insufficient bits_per_pixel from the client sanitization [rhel-7.1])
  - Resolves: bz#1157798
    ([FEAT RHEL7.1]: qemu: Support compression for dump-guest-memory command)
  - Resolves: bz#1160237
    (qemu-img convert intermittently corrupts output images)
  - Resolves: bz#1161563
    (invalid QEMU NOTEs in vmcore that is dumped for multi-VCPU guests)
  - Resolves: bz#1161890
    ([abrt] qemu-kvm: pixman_image_get_data(): qemu-kvm killed by SIGSEGV)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-81.el7
changelog:
  - kvm-migration-static-variables-will-not-be-reset-at-seco.patch [bz#1071776]
  - kvm-vfio-pci-Add-debug-config-options-to-disable-MSI-X-K.patch [bz#1098976]
  - kvm-vfio-correct-debug-macro-typo.patch [bz#1098976]
  - kvm-vfio-pci-Fix-MSI-X-debug-code.patch [bz#1098976]
  - kvm-vfio-pci-Fix-MSI-X-masking-performance.patch [bz#1098976]
  - kvm-vfio-Fix-MSI-X-vector-expansion.patch [bz#1098976]
  - kvm-vfio-Don-t-cache-MSIMessage.patch [bz#1098976]
  - Resolves: bz#1071776
    (Migration "expected downtime" does not refresh after reset to a new value)
  - Resolves: bz#1098976
    (2x RHEL 5.10 VM running on RHEL 7 KVM have low TCP_STREAM throughput)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-82.el7
changelog:
  - kvm-hw-pci-fixed-error-flow-in-pci_qdev_init.patch [bz#1046007]
  - kvm-hw-pci-fixed-hotplug-crash-when-using-rombar-0-with-.patch [bz#1046007]
  - Resolves: bz#1046007
    (qemu-kvm aborted when hot plug PCI device to guest with romfile and rombar=0)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-83.el7
changelog:
  - kvm-xhci-add-sanity-checks-to-xhci_lookup_uport.patch [bz#1074219]
  - kvm-Revert-Build-ceph-rbd-only-for-rhev.patch [bz#1140742]
  - kvm-Revert-rbd-Only-look-for-qemu-specific-copy-of-librb.patch [bz#1140742]
  - kvm-Revert-rbd-link-and-load-librbd-dynamically.patch [bz#1140742]
  - kvm-spec-Enable-rbd-driver-add-dependency.patch [bz#1140742]
  - Resolves: bz#1074219
    (qemu core dump when install a RHEL.7 guest(xhci) with migration)
  - Resolves: bz#1140742
    (Enable native support for Ceph)


author: Jeff E. Nelson <jen@redhat.com> - 1.5.3-84.el7
changelog:
  - kvm-qemu-iotests-Test-case-for-backing-file-deletion.patch [bz#1002493]
  - kvm-qemu-iotests-Add-sample-image-and-test-for-VMDK-vers.patch [bz#1134237]
  - kvm-vmdk-Check-VMFS-extent-line-field-number.patch [bz#1134237]
  - kvm-qemu-iotests-Introduce-_unsupported_imgopts.patch [bz#1002493]
  - kvm-qemu-iotests-Add-_unsupported_imgopts-for-vmdk-subfo.patch [bz#1002493]
  - kvm-vmdk-Fix-big-flat-extent-IO.patch [bz#1134241]
  - kvm-vmdk-Check-for-overhead-when-opening.patch [bz#1134251]
  - kvm-block-vmdk-add-basic-.bdrv_check-support.patch [bz#1134251]
  - kvm-qemu-iotest-Make-077-raw-only.patch [bz#1134237]
  - kvm-qemu-iotests-Don-t-run-005-on-vmdk-split-formats.patch [bz#1002493]
  - kvm-vmdk-extract-vmdk_read_desc.patch [bz#1134251]
  - kvm-vmdk-push-vmdk_read_desc-up-to-caller.patch [bz#1134251]
  - kvm-vmdk-do-not-try-opening-a-file-as-both-image-and-des.patch [bz#1134251]
  - kvm-vmdk-correctly-propagate-errors.patch [bz#1134251]
  - kvm-block-vmdk-do-not-report-file-offset-for-compressed-.patch [bz#1134251]
  - kvm-vmdk-Fix-d-and-lld-to-PRI-in-format-strings.patch [bz#1134251]
  - kvm-vmdk-Fix-x-to-PRIx32-in-format-strings-for-cid.patch [bz#1134251]
  - kvm-qemu-img-Convert-by-cluster-size-if-target-is-compre.patch [bz#1134283]
  - kvm-vmdk-Implement-.bdrv_write_compressed.patch [bz#1134283]
  - kvm-vmdk-Implement-.bdrv_get_info.patch [bz#1134283]
  - kvm-qemu-iotests-Test-converting-to-streamOptimized-from.patch [bz#1134283]
  - kvm-vmdk-Fix-local_err-in-vmdk_create.patch [bz#1134283]
  - kvm-fpu-softfloat-drop-INLINE-macro.patch [bz#1002493]
  - kvm-block-New-bdrv_nb_sectors.patch [bz#1002493]
  - kvm-vmdk-Optimize-cluster-allocation.patch [bz#1002493]
  - kvm-vmdk-Handle-failure-for-potentially-large-allocation.patch [bz#1002493]
  - kvm-vmdk-Use-bdrv_nb_sectors-where-sectors-not-bytes-are.patch [bz#1002493]
  - kvm-vmdk-fix-vmdk_parse_extents-extent_file-leaks.patch [bz#1002493]
  - kvm-vmdk-fix-buf-leak-in-vmdk_parse_extents.patch [bz#1002493]
  - kvm-vmdk-Fix-integer-overflow-in-offset-calculation.patch [bz#1002493]
  - kvm-migration-fix-parameter-validation-on-ram-load-CVE-2.patch [bz#1163078]
  - Resolves: bz#1002493
    (qemu-img convert rate about 100k/second from qcow2/raw to vmdk format on nfs system file)
  - Resolves: bz#1134237
    (Opening malformed VMDK description file should fail)
  - Resolves: bz#1134241
    (QEMU fails to correctly read/write on VMDK with big flat extent)
  - Resolves: bz#1134251
    (Opening an obviously truncated VMDK image should fail)
  - Resolves: bz#1134283
    (qemu-img convert from ISO to streamOptimized fails)
  - Resolves: bz#1163078
    (CVE-2014-7840 qemu-kvm: qemu: insufficient parameter validation during ram load [rhel-7.1])


author: Jeff E. Nelson <jen@redhat.com> - 1.5.3-85.el7
changelog:
  - kvm-block-delete-cow-block-driver.patch [bz#1175325]
  - Resolves: bz#1175325
    (Delete cow block driver)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-86.el7
changelog:
  - kvm-vfio-pci-Fix-interrupt-disabling.patch [bz#1180942]
  - kvm-cirrus-fix-blit-region-check.patch [bz#1169456]
  - kvm-cirrus-don-t-overflow-CirrusVGAState-cirrus_bltbuf.patch [bz#1169456]
  - Resolves: bz#1169456
    (CVE-2014-8106 qemu-kvm: qemu: cirrus: insufficient blit region checks [rhel-7.1])
  - Resolves: bz#1180942
    (qemu core dumped when unhotplug gpu card assigned to guest)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-86.el7_1.1
changelog:
  - kvm-pc-add-rhel6.6.0-machine-type.patch [bz#1198958]
  - Resolves: bz#1198958
    (Add rhel-6.6.0 machine type to RHEL 7.1.z to support RHEL 6.6 to RHEL 7.1 live migration)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-87.el7
changelog:
  - kvm-trace-add-qemu_system_powerdown_request-and-qemu_sys.patch [bz#1155671]
  - kvm-virtio-net-drop-assert-on-vm-stop.patch [bz#1139562]
  - kvm-socket-shutdown.patch [bz#1086168]
  - kvm-Handle-bi-directional-communication-for-fd-migration.patch [bz#1086168]
  - kvm-migration_cancel-shutdown-migration-socket.patch [bz#1086168]
  - kvm-iscsi-Refuse-to-open-as-writable-if-the-LUN-is-write.patch [bz#1032412]
  - kvm-main-set-current_machine-before-calling-machine-init.patch [bz#1176283]
  - kvm-pc_sysfw-prevent-pflash-and-or-mis-sized-firmware-fo.patch [bz#1176283]
  - kvm-Restore-atapi_dma-flag-across-migration.patch [bz#892258]
  - kvm-atapi-migration-Throw-recoverable-error-to-avoid-rec.patch [bz#892258]
  - kvm-build-reenable-local-builds-to-pass-enable-debug-RHE.patch []
  - kvm-raw-posix-Fail-gracefully-if-no-working-alignment-is.patch [bz#1184363]
  - kvm-block-Add-Error-argument-to-bdrv_refresh_limits.patch [bz#1184363]
  - kvm-Python-lang-gdb-script-to-extract-x86_64-guest-vmcor.patch [bz#828493]
  - kvm-RPM-spec-install-dump-guest-memory.py-RHEL-only.patch [bz#828493]
  - kvm-spec-Enable-build-of-qemu-img-and-libcacard-for-ppc6.patch [bz#1190086]
  - Resolves: bz#1032412
    (opening read-only iscsi lun as read-write should fail)
  - Resolves: bz#1086168
    (qemu-kvm can not cancel migration in src host when network of dst host failed)
  - Resolves: bz#1139562
    (qemu-kvm with vhost=off and sndbuf=100 crashed when stop it during pktgen test from guest to host)
  - Resolves: bz#1155671
    ([Fujitsu 7.2 FEAT]: QEMU: Add tracepoints in system shutdown)
  - Resolves: bz#1176283
    ([migration]migration failed when configure guest with OVMF bios + machine type=rhel6.5.0)
  - Resolves: bz#1184363
    (Qemu process fails to start with a multipath device with all paths failed)
  - Resolves: bz#1190086
    (build qemu-img/libcacard on ppc64le for 7.2)
  - Resolves: bz#828493
    ([Hitachi 7.2 FEAT] Extract guest memory dump from qemu-kvm core)
  - Resolves: bz#892258
    (ide CDROM io/data errors after migration)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-88.el7
changelog:
  - kvm-vfio-warn-if-host-device-rom-can-t-be-read.patch [bz#1210503]
  - kvm-vfio-Do-not-reattempt-a-failed-rom-read.patch [bz#1210503]
  - kvm-vfio-Correction-in-vfio_rom_read-when-attempting-rom.patch [bz#1210503]
  - kvm-vfio-Fix-overrun-after-readlink-fills-buffer-complet.patch [bz#1210504]
  - kvm-vfio-use-correct-runstate.patch [bz#1210505]
  - kvm-vfio-pci-Fix-BAR-size-overflow.patch [bz#1181267]
  - kvm-vfio-Use-vfio-type1-v2-IOMMU-interface.patch [bz#1210508]
  - kvm-vfio-pci-Enable-device-request-notification-support.patch [bz#1210509]
  - kvm-vfio-pci-Further-fix-BAR-size-overflow.patch [bz#1181267]
  - kvm-vfio-pci-Fix-error-path-sign.patch [bz#1210504]
  - kvm-x86-Use-common-variable-range-MTRR-counts.patch [bz#1210510]
  - kvm-x86-kvm-Add-MTRR-support-for-kvm_get-put_msrs.patch [bz#1210510]
  - kvm-x86-Clear-MTRRs-on-vCPU-reset.patch [bz#1210510]
  - kvm-spec-Exclude-aarch64.patch [bz#1217850]
  - Resolves: bz#1181267
    (vfio-pci: Fix BAR size overflow)
  - Resolves: bz#1210503
    (vfio improve PCI ROM loading error handling)
  - Resolves: bz#1210504
    (vfio: Fix overrun after readlink() fills buffer completely)
  - Resolves: bz#1210505
    (vfio: use correct runstate)
  - Resolves: bz#1210508
    (vfio: Use vfio type1 v2 IOMMU interface)
  - Resolves: bz#1210509
    (vfio-pci: Enable device request notification support)
  - Resolves: bz#1210510
    (Sync MTRRs with KVM and disable on reset)
  - Resolves: bz#1217850
    (qemu-kvm: ExcludeArch: aarch64)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-89.el7
changelog:
  - kvm-CVE-2015-1779-incrementally-decode-websocket-frames.patch [bz#1206497]
  - kvm-CVE-2015-1779-limit-size-of-HTTP-headers-from-websoc.patch [bz#1206497]
  - kvm-qemu-iotests-Test-unaligned-4k-zero-write.patch [bz#1200295]
  - kvm-block-Fix-NULL-deference-for-unaligned-write-if-qiov.patch [bz#1200295]
  - kvm-qemu-iotests-Test-unaligned-sub-block-zero-write.patch [bz#1200295]
  - kvm-fdc-force-the-fifo-access-to-be-in-bounds-of-the-all.patch [bz#1219270]
  - Resolves: bz#1200295
    (QEMU segfault when doing unaligned zero write to non-512 disk)
  - Resolves: bz#1206497
    (CVE-2015-1779 qemu-kvm: qemu: vnc: insufficient resource limiting in VNC websockets decoder [rhel-7.2])
  - Resolves: bz#1219270
    (CVE-2015-3456 qemu-kvm: qemu: floppy disk controller flaw [rhel-7.2])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-90.el7
changelog:
  - kvm-qcow2-Pass-discard-type-to-qcow2_discard_clusters.patch [bz#1208808]
  - kvm-qcow2-Discard-VM-state-in-active-L1-after-creating-s.patch [bz#1208808]
  - kvm-configure-Require-libfdt-for-arm-ppc-microblaze-soft.patch [bz#1217850]
  - kvm-configure-Add-handling-code-for-AArch64-targets.patch [bz#1217850]
  - kvm-configure-permit-compilation-on-arm-aarch64.patch [bz#1217850]
  - kvm-spec-Allow-build-on-aarch64.patch [bz#1217850]
  - kvm-Remove-redhat-extensions-from-qmp-events.txt.patch [bz#1222833]
  - kvm-spec-Add-misssing-QMP-documentation-files.patch [bz#1222833]
  - Resolves: bz#1208808
    (creating second and further snapshot takes ages)
  - Resolves: bz#1217850
    (qemu-kvm: Enable build on aarch64)
  - Resolves: bz#1222833
    (We ship incomplete QMP documentation)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-91.el7
changelog:
  - kvm-vmdk-Fix-overflow-if-l1_size-is-0x20000000.patch [bz#1217351]
  - kvm-block-ssh-Drop-superfluous-libssh2_session_last_errn.patch [bz#1226683]
  - kvm-block-ssh-Propagate-errors-through-check_host_key.patch [bz#1226683]
  - kvm-block-ssh-Propagate-errors-through-authenticate.patch [bz#1226683]
  - kvm-block-ssh-Propagate-errors-through-connect_to_ssh.patch [bz#1226683]
  - kvm-block-ssh-Propagate-errors-to-open-and-create-method.patch [bz#1226683]
  - kvm-ssh-Don-t-crash-if-either-host-or-path-is-not-specif.patch [bz#1226683]
  - kvm-curl-Replaced-old-error-handling-with-error-reportin.patch [bz#1226684]
  - kvm-curl-Fix-long-line.patch [bz#1226684]
  - kvm-curl-Remove-unnecessary-use-of-goto.patch [bz#1226684]
  - kvm-curl-Fix-return-from-curl_read_cb-with-invalid-state.patch [bz#1226684]
  - kvm-curl-Remove-erroneous-sleep-waiting-for-curl-complet.patch [bz#1226684]
  - kvm-curl-Whitespace-only-changes.patch [bz#1226684]
  - kvm-block-curl-Implement-the-libcurl-timer-callback-inte.patch [bz#1226684]
  - kvm-curl-Remove-unnecessary-explicit-calls-to-internal-e.patch [bz#1226684]
  - kvm-curl-Eliminate-unnecessary-use-of-curl_multi_socket_.patch [bz#1226684]
  - kvm-curl-Ensure-all-informationals-are-checked-for-compl.patch [bz#1226684]
  - kvm-curl-Fix-hang-reading-from-slow-connections.patch [bz#1226684]
  - kvm-curl-Fix-build-when-curl_multi_socket_action-isn-t-a.patch [bz#1226684]
  - kvm-curl-Remove-broken-parsing-of-options-from-url.patch [bz#1226684]
  - kvm-curl-refuse-to-open-URL-from-HTTP-server-without-ran.patch [bz#1226684]
  - kvm-curl-Add-sslverify-option.patch [bz#1226684]
  - kvm-block-Drop-superfluous-conditionals-around-g_free.patch [bz#1226684]
  - kvm-curl-Handle-failure-for-potentially-large-allocation.patch [bz#1226684]
  - kvm-block.curl-adding-timeout-option.patch [bz#1226684]
  - kvm-curl-Allow-a-cookie-or-cookies-to-be-sent-with-http-.patch [bz#1226684]
  - kvm-curl-The-macro-that-you-have-to-uncomment-to-get-deb.patch [bz#1226684]
  - kvm-block-curl-Improve-type-safety-of-s-timeout.patch [bz#1226684]
  - kvm-Enable-ssh-driver-read-only.patch [bz#1226683]
  - kvm-Enable-curl-driver-read-only.patch [bz#1226684]
  - Resolves: bz#1217351
    (Overflow in malloc size calculation in VMDK driver)
  - Resolves: bz#1226683
    ([virt-v2v] Backport upstream ssh driver to qemu-kvm)
  - Resolves: bz#1226684
    ([virt-v2v] Enable curl driver + upstream features + fixes in qemu-kvm and enable https)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-92.el7
changelog:
  - kvm-seccomp-add-timerfd_create-and-timerfd_settime-to-th.patch [bz#1185737]
  - kvm-qdict-Add-qdict_join.patch [bz#1226697]
  - kvm-block-Allow-JSON-filenames.patch [bz#1226697]
  - kvm-spice-display-fix-segfault-in-qemu_spice_create_upda.patch [bz#1230808]
  - Resolves: bz#1185737
    (qemu-kvm hang when boot with usb-host and sandbox was enabled)
  - Resolves: bz#1226697
    ([virt-v2v] Allow json: filenames in qemu-img)
  - Resolves: bz#1230808
    ([abrt] qemu-system-x86: __memcmp_sse4_1(): qemu-system-x86_64 killed by SIGSEGV)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-93.el7
changelog:
  - kvm-atomics-add-explicit-compiler-fence-in-__atomic-memo.patch [bz#1142857 bz#1142857 (aka bz#8*bz#10^bz#6/bz#7)]
  - Resolves: bz#1142857
    ([abrt] qemu-kvm: bdrv_error_action(): qemu-kvm killed by SIGABRT)
  - Resolves: bz#8*10^6/7)
    (XFree86 apparently sets xhost to ill inital values)
  - Resolves: bz#(aka
    ()


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-94.el7
changelog:
  - kvm-qcow2-Put-cache-reference-in-error-case.patch [bz#1129893]
  - kvm-qcow2-Catch-bdrv_getlength-error.patch [bz#1129893]
  - kvm-block-Introduce-qemu_try_blockalign.patch [bz#1129893]
  - kvm-qcow2-Catch-host_offset-for-data-allocation.patch [bz#1129893]
  - kvm-iotests-Add-test-for-image-header-overlap.patch [bz#1129893]
  - kvm-block-Catch-bs-drv-in-bdrv_check.patch [bz#1129893]
  - kvm-qapi-block-Add-fatal-to-BLOCK_IMAGE_CORRUPTED.patch [bz#1129893]
  - kvm-qcow2-Add-qcow2_signal_corruption.patch [bz#1129893]
  - kvm-qcow2-Use-qcow2_signal_corruption-for-overlaps.patch [bz#1129893]
  - kvm-qcow2-Check-L1-L2-reftable-entries-for-alignment.patch [bz#1129893]
  - kvm-iotests-Add-more-tests-for-qcow2-corruption.patch [bz#1129893]
  - kvm-qcow2-fix-leak-of-Qcow2DiscardRegion-in-update_refco.patch [bz#1129893]
  - kvm-qcow2-Do-not-overflow-when-writing-an-L1-sector.patch [bz#1129893]
  - kvm-iotests-Add-test-for-qcow2-L1-table-update.patch [bz#1129893]
  - kvm-block-Add-qemu_-try_-blockalign0.patch [bz#1129893]
  - kvm-qcow2-Calculate-refcount-block-entry-count.patch [bz#1129893]
  - kvm-qcow2-Fix-leaks-in-dirty-images.patch [bz#1129893]
  - kvm-qcow2-Split-qcow2_check_refcounts.patch [bz#1129893]
  - kvm-qcow2-Use-sizeof-refcount_table.patch [bz#1129893]
  - kvm-qcow2-Pull-check_refblocks-up.patch [bz#1129893]
  - kvm-qcow2-Use-int64_t-for-in-memory-reftable-size.patch [bz#1129893]
  - kvm-qcow2-Split-fail-code-in-L1-and-L2-checks.patch [bz#1129893]
  - kvm-qcow2-Let-inc_refcounts-return-errno.patch [bz#1129893]
  - kvm-qcow2-Let-inc_refcounts-resize-the-reftable.patch [bz#1129893]
  - kvm-qcow2-Reuse-refcount-table-in-calculate_refcounts.patch [bz#1129893]
  - kvm-qcow2-Fix-refcount-blocks-beyond-image-end.patch [bz#1129893]
  - kvm-qcow2-Do-not-perform-potentially-damaging-repairs.patch [bz#1129893]
  - kvm-qcow2-Rebuild-refcount-structure-during-check.patch [bz#1129893]
  - kvm-qcow2-Clean-up-after-refcount-rebuild.patch [bz#1129893]
  - kvm-iotests-Fix-test-outputs.patch [bz#1129893]
  - kvm-iotests-Add-test-for-potentially-damaging-repairs.patch [bz#1129893]
  - kvm-qcow2-Drop-REFCOUNT_SHIFT.patch [bz#1129893]
  - kvm-block-Respect-underlying-file-s-EOF.patch [bz#1129893]
  - kvm-qcow2-Fix-header-extension-size-check.patch [bz#1129893]
  - kvm-qcow2.py-Add-required-padding-for-header-extensions.patch [bz#1129893]
  - kvm-block-Don-t-probe-for-unknown-backing-file-format.patch [bz#1129893]
  - kvm-qcow2-Add-two-more-unalignment-checks.patch [bz#1129893]
  - kvm-iotests-Add-tests-for-more-corruption-cases.patch [bz#1129893]
  - kvm-qcow2-Respect-new_block-in-alloc_refcount_block.patch [bz#1129893]
  - kvm-iotests-Add-tests-for-refcount-table-growth.patch [bz#1129893]
  - kvm-qcow2-Fix-header-update-with-overridden-backing-file.patch [bz#1129893]
  - kvm-qcow2-Flush-pending-discards-before-allocating-clust.patch [bz#1129893]
  - Resolves: bz#1129893
    (Backport additional qcow2 corruption prevention and image repair patches)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-95.el7
changelog:
  - kvm-i8254-fix-out-of-bounds-memory-access-in-pit_ioport_.patch [bz#1229646]
  - kvm-target-i386-fix-cpuid-leaf-0x0d.patch [bz#1233350]
  - kvm-target-i386-Intel-MPX.patch [bz#1233350]
  - kvm-always-update-the-MPX-model-specific-register.patch [bz#1233350]
  - kvm-target-i386-bugfix-of-Intel-MPX.patch [bz#1233350]
  - kvm-target-i386-fix-set-of-registers-zeroed-on-reset.patch [bz#1233350]
  - kvm-target-i386-Add-mpx-CPU-feature-name.patch [bz#1233350]
  - kvm-target-i386-Avoid-shifting-left-into-sign-bit.patch [bz#1233350]
  - kvm-target-i386-add-Intel-AVX-512-support.patch [bz#1233350]
  - kvm-configure-Add-support-for-tcmalloc.patch [bz#1213881]
  - Resolves: bz#1213881
    (enable using tcmalloc for memory allocation in qemu-kvm)
  - Resolves: bz#1229646
    (CVE-2015-3214 qemu-kvm: qemu: i8254: out-of-bounds memory access in pit_ioport_read function [rhel-7.2])
  - Resolves: bz#1233350
    ([Intel 7.2 FEAT] Expose MPX feature to guest - qemu-kvm)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-96.el7
changelog:
  - kvm-ahci.c-mask-unused-flags-when-reading-size-PRDT-DBC.patch [bz#1205100]
  - kvm-ide-Correct-handling-of-malformed-short-PRDTs.patch [bz#1205100]
  - Resolves: bz#1205100
    (qemu-kvm: Qemu: PRDT overflow from guest to host [rhel-7.2])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-97.el7
changelog:
  - kvm-ide-Check-array-bounds-before-writing-to-io_buffer-C.patch [bz#1243690]
  - kvm-ide-atapi-Fix-START-STOP-UNIT-command-completion.patch [bz#1243690]
  - kvm-ide-Clear-DRQ-after-handling-all-expected-accesses.patch [bz#1243690]
  - Resolves: bz#1243690
    (EMBARGOED CVE-2015-5154 qemu-kvm: qemu: ide: atapi: heap overflow during I/O buffer memory access [rhel-7.2])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-98.el7
changelog:
  - kvm-block-curl-Don-t-lose-original-error-when-a-connecti.patch [bz#1235812]
  - kvm-vfio-pci-Add-pba_offset-PCI-quirk-for-Chelsio-T5-dev.patch [bz#1244347]
  - kvm-block-Print-its-file-name-if-backing-file-opening-fa.patch [bz#1238639]
  - kvm-block-Propagate-error-in-bdrv_img_create.patch [bz#1238639]
  - kvm-iotests-Add-test-for-non-existing-backing-file.patch [bz#1238639]
  - Resolves: bz#1235812
    (block/curl: Fix generic "Input/output error" on failure)
  - Resolves: bz#1238639
    (qemu-img shows error message for backing file twice)
  - Resolves: bz#1244347
    (Quirk for Chelsio T5 MSI-X PBA)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-99.el7
changelog:
  - kvm-usb-ccid-add-missing-wakeup-calls.patch [bz#1243731]
  - kvm-vpc-Handle-failure-for-potentially-large-allocations.patch [bz#1217349]
  - kvm-block-vpc-prevent-overflow-if-max_table_entries-0x40.patch [bz#1217349]
  - kvm-block-qemu-iotests-add-check-for-multiplication-over.patch [bz#1217349]
  - kvm-virtio-scsi-use-virtqueue_map_sg-when-loading-reques.patch [bz#1249718]
  - kvm-scsi-disk-fix-cmd.mode-field-typo.patch [bz#1249718]
  - kvm-rtl8139-avoid-nested-ifs-in-IP-header-parsing-CVE-20.patch [bz#1248766]
  - kvm-rtl8139-drop-tautologous-if-ip-.-statement-CVE-2015-.patch [bz#1248766]
  - kvm-rtl8139-skip-offload-on-short-Ethernet-IP-header-CVE.patch [bz#1248766]
  - kvm-rtl8139-check-IP-Header-Length-field-CVE-2015-5165.patch [bz#1248766]
  - kvm-rtl8139-check-IP-Total-Length-field-CVE-2015-5165.patch [bz#1248766]
  - kvm-rtl8139-skip-offload-on-short-TCP-header-CVE-2015-51.patch [bz#1248766]
  - kvm-rtl8139-check-TCP-Data-Offset-field-CVE-2015-5165.patch [bz#1248766]
  - Resolves: bz#1217349
    (qemu-img vpc driver segfault)
  - Resolves: bz#1243731
    (smart card emulation doesn't work with USB3 (nec-xhci) controller)
  - Resolves: bz#1248766
    (CVE-2015-5165 qemu-kvm: Qemu: rtl8139 uninitialized heap memory information leakage to guest [rhel-7.2])
  - Resolves: bz#1249718
    (Segfault occurred at Dst VM while completed migration upon ENOSPC)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-100.el7
changelog:
  - kvm-block-update-test-070-for-vhdx.patch [bz#1171576]
  - kvm-block-coverity-fix-check-return-value-for-fcntl-in-g.patch [bz#1219217]
  - Resolves: bz#1171576
    (test case 064 and 070 of qemu-iotests fail for vhdx with qemu-kvm-1.5.3-83.el7)
  - Resolves: bz#1219217
    (Coverity-detected defect: call to fcntl without checking return value)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-101.el7
changelog:
  - kvm-serial-reset-state-at-startup.patch [bz#922014]
  - kvm-ide-Check-validity-of-logical-block-size.patch [bz#1134670]
  - Resolves: bz#1134670
    (fail to specify the physical_block_size/logical_block_size value not 512 for IDE disk)
  - Resolves: bz#922014
    (RFE: support hotplugging chardev & serial ports (Windows guests))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-102.el7
changelog:
  - kvm-mc146818rtc-add-rtc-reset-reinjection-QMP-command.patch [bz#1191226]
  - Resolves: bz#1191226
    (libvirt requires rtc-reset-reinjection command, backport it to RHEL7.1)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-103.el7
changelog:
  - kvm-Drop-superfluous-conditionals-around-g_strdup.patch [bz#1218919]
  - kvm-util-Drop-superfluous-conditionals-around-g_free.patch [bz#1218919]
  - kvm-util-Fuse-g_malloc-memset-into-g_new0.patch [bz#1218919]
  - kvm-util-uri-uri_new-can-t-fail-drop-dead-error-handling.patch [bz#1218919]
  - kvm-util-uri-realloc2n-can-t-fail-drop-dead-error-handli.patch [bz#1218919]
  - kvm-util-uri-URI-member-path-can-be-null-compare-more-ca.patch [bz#1218919]
  - kvm-util-uri-Add-overflow-check-to-rfc3986_parse_port.patch [bz#1218919]
  - Resolves: bz#1218919
    (Coverity-detected defect: buffer overrun at uri.c:2035)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-104.el7
changelog:
  - kvm-qemu-iotests-Filter-qemu-io-output-in-025.patch [bz#1170974]
  - Resolves: bz#1170974
    (test case 025 of qemu-iotests fail for raw with qemu-kvm-1.5.3-83.el7.x86_64)


author: Jeff E. Nelson <jen@redhat.com> - 1.5.3-105.el7
changelog:
  - kvm-qtest-ide-test-disable-flush-test.patch [bz#1270341]
  - Resolves: bz#1270341
    (qemu-kvm build failure race condition in tests/ide-test)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-106.el7
changelog:
  - kvm-ehci-clear-suspend-bit-on-detach.patch [bz#1268879]
  - kvm-rbd-make-qemu-s-cache-setting-override-any-ceph-sett.patch [bz#1277248]
  - kvm-rbd-fix-ceph-settings-precedence.patch [bz#1277248]
  - kvm-target-i386-get-put-MSR_TSC_AUX-across-reset-and-mig.patch [bz#1265427]
  - kvm-rtl8139-Fix-receive-buffer-overflow-check.patch [bz#1252757]
  - kvm-rtl8139-Do-not-consume-the-packet-during-overflow-in.patch [bz#1252757]
  - Resolves: bz#1252757
    ([RHEL-7.2-qmu-kvm] Package is 100% lost when ping from host to Win2012r2 guest with 64000 size)
  - Resolves: bz#1265427
    (contents of MSR_TSC_AUX are not migrated)
  - Resolves: bz#1268879
    (Camera stops work after remote-viewer re-connection [qemu-kvm])
  - Resolves: bz#1277248
    (ceph.conf properties override qemu's command-line properties)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-107.el7
changelog:
  - kvm-raw-posix-Fix-.bdrv_co_get_block_status-for-unaligne.patch [bz#1283116]
  - Resolves: bz#1283116
    ([abrt] qemu-img: get_block_status(): qemu-img killed by SIGABRT)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-108.el7
changelog:
  - kvm-net-Make-qmp_query_rx_filter-with-name-argument-more.patch [bz#1269738]
  - kvm-fw_cfg-add-check-to-validate-current-entry-value-CVE.patch [bz#1298048]
  - Resolves: bz#1269738
    (Vlan table display repeat four times in qmp when queues=4)
  - Resolves: bz#1298048
    (CVE-2016-1714 qemu-kvm: Qemu: nvram: OOB r/w access in processing firmware configurations [rhel-7.3])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-109.el7
changelog:
  - kvm-e1000-eliminate-infinite-loops-on-out-of-bounds-tran.patch [bz#1296044]
  - kvm-nbd-Always-call-close_fn-in-nbd_client_new.patch [bz#1285453]
  - kvm-nbd-server-Coroutine-based-negotiation.patch [bz#1285453]
  - kvm-nbd-client_close-on-error-in-nbd_co_client_start.patch [bz#1285453]
  - kvm-Remove-libcacard-build.patch [bz#1314153]
  - Resolves: bz#1285453
    (An NBD client can cause QEMU main loop to block when connecting to built-in NBD server)
  - Resolves: bz#1296044
    (qemu-kvm: insufficient loop termination conditions in start_xmit() and e1000_receive() [rhel-7.3])
  - Resolves: bz#1314153
    (Disable building of libcacard)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-110.el7
changelog:
  - kvm-qemu-io-Remove-unused-args_command.patch [bz#1272523]
  - kvm-cutils-Support-P-and-E-suffixes-in-strtosz.patch [bz#1272523]
  - kvm-qemu-io-Make-cvtnum-a-wrapper-around-strtosz_suffix.patch [bz#1272523]
  - kvm-qemu-io-Handle-cvtnum-errors-in-alloc.patch [bz#1272523]
  - kvm-qemu-io-Don-t-use-global-bs-in-command-implementatio.patch [bz#1272523]
  - kvm-qemu-io-Split-off-commands-to-qemu-io-cmds.c.patch [bz#1272523]
  - kvm-qemu-io-Factor-out-qemuio_command.patch [bz#1272523]
  - kvm-qemu-io-Move-help-function.patch [bz#1272523]
  - kvm-qemu-io-Move-quit-function.patch [bz#1272523]
  - kvm-qemu-io-Move-qemu_strsep-to-cutils.c.patch [bz#1272523]
  - kvm-qemu-io-Move-functions-for-registering-and-running-c.patch [bz#1272523]
  - kvm-qemu-io-Move-command_loop-and-friends.patch [bz#1272523]
  - kvm-qemu-io-Move-remaining-helpers-from-cmd.c.patch [bz#1272523]
  - kvm-qemu-io-Interface-cleanup.patch [bz#1272523]
  - kvm-qemu-io-Use-the-qemu-version-for-V.patch [bz#1272523]
  - kvm-Make-qemu-io-commands-available-in-HMP.patch [bz#1272523]
  - kvm-blkdebug-Add-BLKDBG_FLUSH_TO_OS-DISK-events.patch [bz#1272523]
  - kvm-qemu-io-fix-cvtnum-lval-types.patch [bz#1272523]
  - kvm-qemu-io-Check-for-trailing-chars.patch [bz#1272523]
  - kvm-qemu-io-Correct-error-messages.patch [bz#1272523]
  - kvm-ide-test-fix-failure-for-test_flush.patch [bz#1272523]
  - kvm-vga-Remove-some-should-be-done-in-BIOS-comments.patch [bz#1331413]
  - kvm-vga-fix-banked-access-bounds-checking-CVE-2016-xxxx.patch [bz#1331413]
  - kvm-vga-add-vbe_enabled-helper.patch [bz#1331413]
  - kvm-vga-factor-out-vga-register-setup.patch [bz#1331413]
  - kvm-vga-update-vga-register-setup-on-vbe-changes.patch [bz#1331413]
  - kvm-vga-make-sure-vga-register-setup-for-vbe-stays-intac.patch [bz#1331413]
  - Resolves: bz#1272523
    (qemu-kvm build failure race condition in tests/ide-test)
  - Resolves: bz#1331413
    (EMBARGOED CVE-2016-3710 qemu-kvm: qemu: incorrect banked access bounds checking in vga module [rhel-7.3])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-111.el7
changelog:
  - kvm-vmdk-Leave-bdi-intact-if-ENOTSUP-in-vmdk_get_info.patch [bz#1299250]
  - kvm-vmdk-Use-g_random_int-to-generate-CID.patch [bz#1299250]
  - kvm-vmdk-Fix-comment-to-match-code-of-extent-lines.patch [bz#1299250]
  - kvm-vmdk-Clean-up-descriptor-file-reading.patch [bz#1299250]
  - kvm-vmdk-Check-descriptor-file-length-when-reading-it.patch [bz#1299250]
  - kvm-vmdk-Remove-unnecessary-initialization.patch [bz#1299250]
  - kvm-vmdk-Set-errp-on-failures-in-vmdk_open_vmdk4.patch [bz#1299250]
  - kvm-block-vmdk-make-ret-variable-usage-clear.patch [bz#1299250]
  - kvm-block-vmdk-move-string-allocations-from-stack-to-the.patch [bz#1299250]
  - kvm-block-vmdk-fixed-sizeof-error.patch [bz#1299250]
  - kvm-vmdk-Widen-before-shifting-32-bit-header-field.patch [bz#1299250]
  - kvm-vmdk-Fix-next_cluster_sector-for-compressed-write.patch [bz#1299250]
  - kvm-vmdk-Fix-index_in_cluster-calculation-in-vmdk_co_get.patch [bz#1299250]
  - kvm-vmdk-Use-vmdk_find_index_in_cluster-everywhere.patch [bz#1299250]
  - kvm-vmdk-Fix-next_cluster_sector-for-compressed-write2.patch [bz#1299250]
  - kvm-vmdk-Create-streamOptimized-as-version-3.patch [bz#1299116]
  - kvm-vmdk-Fix-converting-to-streamOptimized.patch [bz#1299116]
  - kvm-vmdk-Fix-calculation-of-block-status-s-offset.patch [bz#1299116]
  - Resolves: bz#1299116
    (qemu-img created VMDK images lead to "Not a supported disk format (sparse VMDK version too old)")
  - Resolves: bz#1299250
    (qemu-img created VMDK images are unbootable)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-112.el7
changelog:
  - kvm-virtio-scsi-Prevent-assertion-on-missed-events.patch [bz#1312289]
  - kvm-seccomp-adding-sysinfo-system-call-to-whitelist.patch [bz#1177318]
  - kvm-acpi-strip-compiler-info-in-built-in-DSDT.patch [bz#1330969]
  - kvm-acpi-fix-endian-ness-for-table-ids.patch [bz#1330969]
  - kvm-acpi-support-specified-oem-table-id-for-build_header.patch [bz#1330969]
  - kvm-acpi-take-oem_id-in-build_header-optionally.patch [bz#1330969]
  - kvm-acpi-expose-oem_id-and-oem_table_id-in-build_rsdt.patch [bz#1330969]
  - kvm-acpi-add-function-to-extract-oem_id-and-oem_table_id.patch [bz#1330969]
  - kvm-pc-set-the-OEM-fields-in-the-RSDT-and-the-FADT-from-.patch [bz#1330969]
  - kvm-block-jobs-qemu-kvm-rhel-differentiation.patch [bz#1156635]
  - Resolves: bz#1156635
    (Libvirt is confused that qemu-kvm exposes 'block-job-cancel' but not 'block-stream')
  - Resolves: bz#1177318
    (Guest using rbd based image as disk failed to start when sandbox was enabled)
  - Resolves: bz#1312289
    ("qemu-kvm: /builddir/build/BUILD/qemu-1.5.3/hw/scsi/virtio-scsi.c:533: virtio_scsi_push_event: Assertion `event == 0' failed" after hotplug 20 virtio-scsi disks then hotunplug them)
  - Resolves: bz#1330969
    (match the OEM ID and OEM Table ID fields of the FADT and the RSDT to those of the SLIC)


author: Jeff E. Nelson <jen@redhat.com> - 1.5.3-113.el7
changelog:
  - kvm-qxl-allow-to-specify-head-limit-to-qxl-driver.patch [bz#1283198]
  - kvm-qxl-Fix-new-function-name-for-spice-server-library.patch [bz#1283198]
  - kvm-block-raw-posix-Open-file-descriptor-O_RDWR-to-work-.patch [bz#1268345]
  - Resolves: bz#1268345
    (posix_fallocate emulation on NFS fails with Bad file descriptor if fd is opened O_WRONLY)
  - Resolves: bz#1283198
    (RFE: backport max monitor limitation from Qemu upstream)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-114.el7
changelog:
  - kvm-hw-input-hid.c-Fix-capslock-hid-code.patch [bz#1256741]
  - kvm-target-i386-fix-pcmpxstrx-equal-ordered-strstr-mode.patch [bz#1340971]
  - kvm-spec-Update-rules-before-triggering-for-kvm-device.patch [bz#1333159]
  - Resolves: bz#1256741
    ("CapsLock" will work as "\" when boot a guest with usb-kbd)
  - Resolves: bz#1333159
    (qemu-kvm doesn't reload udev rules before triggering for kvm device)
  - Resolves: bz#1340971
    (qemu: accel=tcg does not implement SSE 4 properly)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-115.el7
changelog:
  - kvm-spice-do-not-require-TCP-ports.patch [bz#1336491]
  - kvm-vga-add-sr_vbe-register-set.patch [bz#1346982]
  - Resolves: bz#1336491
    (Ship FD connection patches qemu-kvm part)
  - Resolves: bz#1346982
    (Regression from CVE-2016-3712: windows installer fails to start)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-116.el7
changelog:
  - kvm-block-iscsi-avoid-potential-overflow-of-acb-task-cdb.patch [bz#1340929]
  - Resolves: bz#1340929
    (CVE-2016-5126 qemu-kvm: Qemu: block: iscsi: buffer overflow in iscsi_aio_ioctl [rhel-7.3])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-117.el7
changelog:
  - kvm-target-i386-add-feature-flags-for-CPUID-EAX-0xd-ECX-.patch [bz#1327599]
  - kvm-target-i386-add-Skylake-Client-cpu-model.patch [bz#1327599]
  - Resolves: bz#1327599
    (Add Skylake CPU model)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-118.el7
changelog:
  - kvm-util-introduce-MIN_NON_ZERO.patch [bz#1318199]
  - kvm-BlockLimits-introduce-max_transfer_length.patch [bz#1318199]
  - kvm-block-backend-expose-bs-bl.max_transfer_length.patch [bz#1318199]
  - kvm-scsi-generic-Merge-block-max-xfer-len-in-INQUIRY-res.patch [bz#1318199]
  - kvm-raw-posix-Fetch-max-sectors-for-host-block-device.patch [bz#1318199]
  - kvm-scsi-Advertise-limits-by-blocksize-not-512.patch [bz#1318199]
  - kvm-util-Fix-MIN_NON_ZERO.patch [bz#1318199]
  - Resolves: bz#1318199
    (expose host BLKSECTGET limit in scsi-block (qemu-kvm))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-119.el7
changelog:
  - kvm-qxl-factor-out-qxl_get_check_slot_offset.patch [bz#1355730]
  - kvm-qxl-store-memory-region-and-offset-instead-of-pointe.patch [bz#1355730]
  - kvm-qxl-fix-surface-migration.patch [bz#1355730]
  - kvm-qxl-fix-qxl_set_dirty-call-in-qxl_dirty_one_surface.patch [bz#1355730]
  - Resolves: bz#1355730
    (spice-gtk shows outdated screen state after migration [qemu-kvm])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-120.el7
changelog:
  - kvm-Add-install-dependency-to-newer-libusbx-version.patch [bz#1351106]
  - kvm-virtio-error-out-if-guest-exceeds-virtqueue-size.patch [bz#1359729]
  - Resolves: bz#1351106
    (symbol lookup error: /usr/libexec/qemu-kvm: undefined symbol: libusb_get_port_numbers)
  - Resolves: bz#1359729
    (CVE-2016-5403 qemu-kvm: Qemu: virtio: unbounded memory allocation on host via guest leading to DoS [rhel-7.3])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-121.el7
changelog:
  - kvm-json-parser-drop-superfluous-assignment-for-token-va.patch [bz#1276036]
  - kvm-qjson-Apply-nesting-limit-more-sanely.patch [bz#1276036]
  - kvm-qjson-Don-t-crash-when-input-exceeds-nesting-limit.patch [bz#1276036]
  - kvm-check-qjson-Add-test-for-JSON-nesting-depth-limit.patch [bz#1276036]
  - kvm-qjson-Spell-out-some-silent-assumptions.patch [bz#1276036]
  - kvm-qjson-Give-each-of-the-six-structural-chars-its-own-.patch [bz#1276036]
  - kvm-qjson-Inline-token_is_keyword-and-simplify.patch [bz#1276036]
  - kvm-qjson-Inline-token_is_escape-and-simplify.patch [bz#1276036]
  - kvm-qjson-replace-QString-in-JSONLexer-with-GString.patch [bz#1276036]
  - kvm-qjson-Convert-to-parser-to-recursive-descent.patch [bz#1276036]
  - kvm-qjson-store-tokens-in-a-GQueue.patch [bz#1276036]
  - kvm-qjson-surprise-allocating-6-QObjects-per-token-is-ex.patch [bz#1276036]
  - kvm-qjson-Limit-number-of-tokens-in-addition-to-total-si.patch [bz#1276036]
  - kvm-json-streamer-Don-t-leak-tokens-on-incomplete-parse.patch [bz#1276036]
  - kvm-json-streamer-fix-double-free-on-exiting-during-a-pa.patch [bz#1276036]
  - kvm-trace-remove-malloc-tracing.patch [bz#1360137]
  - Resolves: bz#1276036
    (Crash on QMP input exceeding limits)
  - Resolves: bz#1360137
    (GLib-WARNING **: gmem.c:482: custom memory allocation vtable not supported)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-122.el7
changelog:
  - kvm-virtio-validate-the-existence-of-handle_output-befor.patch [bz#1367040]
  - Resolves: bz#1367040
    (QEMU crash when guest notifies non-existent virtqueue)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-123.el7
changelog:
  - kvm-Fix-backport-of-target-i386-add-feature-flags-for-CP.patch [bz#1371619]
  - kvm-Add-skip_dump-flag-to-ignore-memory-region-during-du.patch [bz#1373088]
  - Resolves: bz#1371619
    (Flags xsaveopt xsavec xgetbv1 are missing on qemu-kvm)
  - Resolves: bz#1373088
    ([FJ7.3 Bug]: virsh dump with both --memory-only and --format option fails)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-124.el7
changelog:
  - kvm-target-i386-Add-support-for-FEAT_7_0_ECX.patch [bz#1372459]
  - kvm-target-i386-Add-more-Intel-AVX-512-instructions-supp.patch [bz#1372459]
  - Resolves: bz#1372459
    ([Intel 7.3 Bug] SKL-SP Guest cpu doesn't support avx512 instruction sets(avx512bw, avx512dq and avx512vl) (qemu-kvm))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-125.el7
changelog:
  - kvm-nbd-server-Set-O_NONBLOCK-on-client-fd.patch [bz#1285453]
  - Resolves: bz#1285453
    (An NBD client can cause QEMU main loop to block when connecting to built-in NBD server)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-126.el7
changelog:
  - kvm-virtio-recalculate-vq-inuse-after-migration.patch [bz#1376542]
  - Resolves: bz#1376542
    (RHSA-2016-1756 breaks migration of instances)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-126.el7_3.1
changelog:
  - kvm-ide-fix-halted-IO-segfault-at-reset.patch [bz#1393042]
  - kvm-hw-i386-regenerate-checked-in-AML-payload-RHEL-only.patch [bz#1392027]
  - kvm-SPEC-file-flip-the-build-from-IASL-to-checked-in-AML.patch [bz#1392027]
  - Resolves: bz#1392027
    (shutdown rhel 5.11 guest failed and stop at "system halted")
  - Resolves: bz#1393042
    (system_reset should clear pending request for error (IDE))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-126.el7_3.2
changelog:
  - kvm-virtio-introduce-virtqueue_unmap_sg.patch [bz#1393484]
  - kvm-virtio-introduce-virtqueue_discard.patch [bz#1393484]
  - kvm-virtio-decrement-vq-inuse-in-virtqueue_discard.patch [bz#1393484]
  - kvm-balloon-fix-segfault-and-harden-the-stats-queue.patch [bz#1393484]
  - kvm-virtio-balloon-discard-virtqueue-element-on-reset.patch [bz#1393484]
  - kvm-virtio-zero-vq-inuse-in-virtio_reset.patch [bz#1393484]
  - kvm-virtio-add-virtqueue_rewind.patch [bz#1393484]
  - kvm-virtio-balloon-fix-stats-vq-migration.patch [bz#1393484]
  - Resolves: bz#1393484
    ([RHEL7.3] KVM guest shuts itself down after 128th reboot)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-126.el7_3.3
changelog:
  - kvm-net-check-packet-payload-length.patch [bz#1398217]
  - Resolves: bz#1398217
    (CVE-2016-2857 qemu-kvm: Qemu: net: out of bounds read in net_checksum_calculate() [rhel-7.3.z])


author: Petr Hracek <phracek@redhat.com> - 1.17.2-2
changelog:
  - rear does not require syslinux
  - changing to arch package so that syslinux is installed
  - Resolves: #1283927


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 3.0.0-14
changelog:
  - Merge Pacemaker cluster resource agents:
    * Add Source1.
    * Drop noarch. We have real binaries now.
    * Update BuildRequires.
    * Update all relevant prep/build/install/files/description sections.


author: Andrew Beekhof <andrew@beekhof.net> - 3.0.0-16
changelog:
  - Create an ldirectord package
  - Update Pacameker agents to upstream version: 2198dc90bec4
    + Build: Import ldirectord.
    + Ensure HA_VARRUNDIR has a value to substitute
    + High: Add findif tool (mandatory for IPaddr/IPaddr2)
    + High: IPv6addr: new nic and cidr_netmask parameters
    + High: postfix: new resource agent
    + Include license information
    + Low (LF 2159): Squid: make the regexp match more precisely output of netstat
    + Low: configure: Fix package name.
    + Low: ldirectord: add dependency on $remote_fs.
    + Low: ldirectord: add mandatory required header to init script.
    + Medium (LF 2165): IPaddr2: remove all colons from the mac address before passing it to send_arp
    + Medium: VirtualDomain: destroy domain shortly before timeout expiry
    + Medium: shellfuncs: Make the mktemp wrappers work.
    + Remove references to Echo function
    + Remove references to heartbeat shellfuncs.
    + Remove useless path lookups
    + findif: actually include the right header. Simplify configure.
    + ldirectord: Remove superfluous configure artifact.
    + ocf-tester: Fix package reference and path to DTD.


author: Andrew Beekhof <andrew@beekhof.net> - 3.0.3-3
changelog:
  - Update Pacameker agents to upstream version: 099c0e5d80db
    + Add the ha_parameter function back into .ocf-shellfuncs.
    + Bug bnc#534803 - Provide a default for MAILCMD
    + Fix use of undefined macro @HA_NOARCHDATAHBDIR@
    + High (LF 2138): IPsrcaddr: replace 0/0 with proper ip prefix (thanks to Michael Ricordeau and Michael Schwartzkopff)
    + Import shellfuncs from heartbeat as badly written RAs use it
    + Medium (LF 2173): nfsserver: exit properly in nfsserver_validate
    + Medium: RA: Filesystem: implement monitor operation
    + Medium: RA: VirtualDomain: loop on status if libvirtd is unreachable
    + Medium: RA: VirtualDomain: loop on status if libvirtd is unreachable (addendum)
    + Medium: RA: iSCSILogicalUnit: use a 16-byte default SCSI ID
    + Medium: RA: iSCSITarget: be more persistent deleting targets on stop
    + Medium: RA: portblock: add per-IP filtering capability
    + Medium: mysql-proxy: log_level and keepalive parameters
    + Medium: oracle: drop spurious output from sqlplus
    + RA: Filesystem: allow configuring smbfs mounts as clones


author: Andrew Beekhof <andrew@beekhof.net> - 3.0.4-2
changelog:
  - Update Pacameker agents to upstream version: e2338892f59f
    + High: send_arp - turn on unsolicited mode for compatibilty with the libnet version's exit codes
    + High: Trap sigterm for compatibility with the libnet version of send_arp
    + Medium: Bug - lf#2147: IPaddr2: behave if the interface is down
    + Medium: IPv6addr: recognize network masks properly
    + Medium: RA: VirtualDomain: avoid needlessly invoking "virsh define"


author: Andrew Beekhof <andrew@beekhof.net> - 3.0.5-2
changelog:
  - Update Pacameker agents to upstream version: bc00c0b065d9
    + High: RA: introduce OCF_FUNCTIONS_DIR, allow it to be overridden (LF2239)
    + High: doc: add man pages for all RAs (LF2237)
    + High: syslog-ng: new RA
    + High: vmware: make meta-data work and several cleanups (LF 2212)
    + Medium: .ocf-shellfuncs: add ocf_is_probe function
    + Medium: Dev: make RAs executable (LF2239)
    + Medium: IPv6addr: ifdef out the ip offset hack for libnet v1.1.4 (LF 2034)
    + Medium: add mercurial repository version information to .ocf-shellfuncs
    + Medium: build: add perl-MailTools runtime dependency to ldirectord package (LF 1469)
    + Medium: iSCSITarget, iSCSILogicalUnit: support LIO
    + Medium: nfsserver: use check_binary properly in validate (LF 2211)
    + Medium: nfsserver: validate should not check if nfs_shared_infodir exists (thanks to eelco@procolix.com) (LF 2219)
    + Medium: oracle/oralsnr: export variables properly
    + Medium: pgsql: remove the previous backup_label if it exists
    + Medium: postfix: fix double stop (thanks to Dinh N. Quoc)
    + RA: LVM: Make monitor operation quiet in logs (bnc#546353)
    + RA: Xen: Remove instance_attribute "allow_migrate" (bnc#539968)
    + ldirectord: OCF agent: overhaul


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 3.0.6-1
changelog:
  - New rgmanager resource agents upstream release
  - spec file update:
    * use global instead of define
    * use new Source0 url
    * use resource-agents macro more aggressively


author: Andrew Beekhof <andrew@beekhof.net> - 3.0.6-2
changelog:
  - Update Pacameker agents to upstream version: c76b4a6eb576
    + High: RA: VirtualDomain: fix forceful stop (LF 2283)
    + High: apache: monitor operation of depth 10 for web applications (LF 2234)
    + Medium: IPaddr2: CLUSTERIP/iptables rule not always inserted on failed monitor (LF 2281)
    + Medium: RA: Route: improve validate (LF 2232)
    + Medium: mark obsolete RAs as deprecated (LF 2244)
    + Medium: mysql: escalate stop to KILL if regular shutdown doesn't work


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 3.0.8-1
changelog:
  - New rgmanager resource agents upstream release
    Resolves: rhbz#548133, rhbz#565907, rhbz#545602, rhbz#555901
    Resolves: rhbz#564471, rhbz#515717, rhbz#557128, rhbz#536157
    Resolves: rhbz#455300, rhbz#561416, rhbz#562237, rhbz#537201
    Resolves: rhbz#536962, rhbz#553383, rhbz#556961, rhbz#555363
    Resolves: rhbz#557128, rhbz#455300, rhbz#557167, rhbz#459630
    Resolves: rhbz#532808, rhbz#556603, rhbz#554968, rhbz#555047
    Resolves: rhbz#554968, rhbz#555047
  - spec file update:
    * update spec file copyright date
    * use bz2 tarball


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 3.0.9-1
changelog:
  - New rgmanager resource agents upstream release
    Resolves: rhbz#455300, rhbz#568446, rhbz#561862, rhbz#536902
    Resolves: rhbz#512171, rhbz#519491


author: Andrew Beekhof <andrew@beekhof.net> - 3.0.9-2
changelog:
  - Resolves: rhbz#572993 - Patched build process to correctly generate ldirectord man page
  - Resolves: rhbz#574732 - Add libnet-devel as a dependancy to ensure IPaddrv6 is built


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 3.0.10-1
changelog:
  - New rgmanager resource agents upstream release
    Resolves: rhbz#519491, rhbz#570525, rhbz#571806, rhbz#574027
    Resolves: rhbz#574215, rhbz#574886, rhbz#576322, rhbz#576335
    Resolves: rhbz#575103, rhbz#577856, rhbz#577874, rhbz#578249
    Resolves: rhbz#578625, rhbz#578626, rhbz#578628, rhbz#578626
    Resolves: rhbz#579621, rhbz#579623, rhbz#579625, rhbz#579626
    Resolves: rhbz#579059


author: Andrew Beekhof <andrew@beekhof.net> - 3.0.10-2
changelog:
  - New pacemaker agents upstream release
    + High: RA: vmware: fix set_environment() invocation (LF 2342)
    + High: RA: vmware: update to version 0.2
    + Medium: Filesystem: prefer /proc/mounts to /etc/mtab for non-bind mounts (lf#2388)
    + Medium: IPaddr2: don't bring the interface down on stop (thanks to Lars Ellenberg)
    + Medium: IPsrcaddr: modify the interface route (lf#2367)
    + Medium: ldirectord: Allow multiple email addresses (LF 2168)
    + Medium: ldirectord: fix setting defaults for configfile and ldirectord (lf#2328)
    + Medium: meta-data: improve timeouts in most resource agents
    + Medium: nfsserver: use default values (lf#2321)
    + Medium: ocf-shellfuncs: don't log but print to stderr if connected to a terminal
    + Medium: ocf-shellfuncs: don't output to stderr if using syslog
    + Medium: oracle/oralsnr: improve exit codes if the environment isn't valid
    + Medium: RA: iSCSILogicalUnit: fix monitor for STGT
    + Medium: RA: make sure that OCF_RESKEY_CRM_meta_interval is always defined (LF 2284)
    + Medium: RA: ManageRAID: require bash
    + Medium: RA: ManageRAID: require bash
    + Medium: RA: VirtualDomain: bail out early if config file can't be read during probe (Novell 593988)
    + Medium: RA: VirtualDomain: fix incorrect use of __OCF_ACTION
    + Medium: RA: VirtualDomain: improve error messages
    + Medium: RA: VirtualDomain: spin on define until we definitely have a domain name
    + Medium: Route: add route table parameter (lf#2335)
    + Medium: sfex: don't use pid file (lf#2363,bnc#585416)
    + Medium: sfex: exit with success on stop if sfex has never been started (bnc#585416)


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 3.0.11-1
changelog:
  - new upstream release
    Resolves: rhbz#583945, rhbz#581047, rhbz#576330, rhbz#583017
    Resolves: rhbz#583019, rhbz#583948, rhbz#584003, rhbz#582017
    Resolves: rhbz#555901, rhbz#582754, rhbz#582573, rhbz#581533
  - Switch to file based Requires.
    Also address several other problems related to missing runtime
    components in different agents.
    With the current Requires: set, we guarantee all basic functionalities
    out of the box for lvm/fs/clusterfs/netfs/networking.
    Resolves: rhbz#570008


author: Andrew Beekhof <andrew@beekhof.net> - 3.0.12-1
changelog:
  - New pacemaker agents upstream release: a7c0f35916bf
    + High: pgsql: properly implement pghost parameter
    + High: RA: mysql: fix syntax error
    + High: SAPInstance RA: do not rely on op target rc when monitoring clones (lf#2371)
    + High: set the HA_RSCTMP directory to /var/run/resource-agents (lf#2378)
    + Medium: IPaddr/IPaddr2: add a description of the assumption in meta-data
    + Medium: IPaddr: return the correct code if interface delete failed
    + Medium: nfsserver: rpc.statd as the notify cmd does not work with -v (thanks to Carl Lewis)
    + Medium: oracle: reduce output from sqlplus to the last line for queries (bnc#567815)
    + Medium: pgsql: implement "config" parameter
    + Medium: RA: iSCSITarget: follow changed IET access policy


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 3.0.12-1
changelog:
  - new upstream release
    Resolves: rhbz#585217, rhbz#586100, rhbz#581533, rhbz#582753
    Resolves: rhbz#582754, rhbz#585083, rhbz#587079, rhbz#588890
    Resolves: rhbz#588925, rhbz#583789, rhbz#589131, rhbz#588010
    Resolves: rhbz#576871, rhbz#576871, rhbz#590000, rhbz#589823


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 3.0.13-1
changelog:
  - new upstream release
    Resolves: rhbz#592103, rhbz#593108, rhbz#578617, rhbz#594626
    Resolves: rhbz#594511, rhbz#596046, rhbz#594111, rhbz#597002
    Resolves: rhbz#599643


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 3.0.14-1
changelog:
  - new upstream release
    Resolves: rhbz#553383, rhbz#557563, rhbz#578625, rhbz#591003
    Resolves: rhbz#593721, rhbz#593726, rhbz#595455, rhbz#595547
    Resolves: rhbz#596918, rhbz#601315, rhbz#604298, rhbz#606368
    Resolves: rhbz#606470, rhbz#606480, rhbz#606754, rhbz#606989
    Resolves: rhbz#607321, rhbz#608154, rhbz#608887, rhbz#609181
    Resolves: rhbz#609866, rhbz#609978, rhbz#612097, rhbz#612110
    Resolves: rhbz#612165, rhbz#612941, rhbz#614127, rhbz#614356
    Resolves: rhbz#614421, rhbz#614457, rhbz#614961, rhbz#615202
    Resolves: rhbz#615203, rhbz#615255, rhbz#617163, rhbz#617566
    Resolves: rhbz#618534, rhbz#618703, rhbz#618806, rhbz#618814


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 3.0.16-1
changelog:
  - new upstream release
    Resolves: rhbz#619096, rhbz#614046, rhbz#620679, rhbz#619680
    Resolves: rhbz#621562, rhbz#621694, rhbz#608887, rhbz#622844
    Resolves: rhbz#623810, rhbz#617306, rhbz#623816, rhbz#624691
    Resolves: rhbz#622576


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 3.0.17-1
changelog:
  - new upstream release
    Resolves: rhbz#632595, rhbz#633856, rhbz#632385, rhbz#628013
    Resolves: rhbz#621313, rhbz#595383, rhbz#580492, rhbz#605733
    Resolves: rhbz#636243, rhbz#591003, rhbz#637913, rhbz#634718
    Resolves: rhbz#617247, rhbz#617247, rhbz#617234, rhbz#631943
    Resolves: rhbz#639018


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 3.1.0-1
changelog:
  - new upstream release
  - spec file update:
    Update upstream URL
    Update source URL
    use standard configure macro
    use standard make invokation


author: Chris Feist <cfeist@redhat.com> - 3.9.2-3.8
changelog:
  - Remove cluster-glue-libs-devel
  - Disable IPv6addr & sfex to fix deps on libplumgpl & libplum (due to
    disappearance of cluster-glue in F18)


author: David Vossel <dvossel@redhat.com> - 3.9.5-5
changelog:
  - Merges redhat provider into heartbeat provider. Remove
    rgmanager's redhat provider.

    Resolves: rhbz#917681
    Resolves: rhbz#928890
    Resolves: rhbz#952716
    Resolves: rhbz#960555


author: David Vossel <dvossel@redhat.com> - 3.9.5-7
changelog:
  - Detect duplicate resources with the same volgrpname
    name when using exclusive activation with tags

    Resolves: # rhbz984054


author: David Vossel <dvossel@redhat.com> - 3.9.5-8
changelog:
  - Add runtime dependencies section for Heartbeat agents.
  - Fix multi-lib inconsistencies found during rpm diff testing.
  - Add dist field back to rpm release name.


author: David Vossel <dvossel@redhat.com> - 3.9.5-10
changelog:
  - Removes ldirectord package
  - Puts sap agents and connector script in subpackage
  - exclude unsupported packages
  - symlink ipaddr to ipaddr2 so only a single agent is supported


author: David Vossel <dvossel@redhat.com> - 3.9.5-14
changelog:
  - Add ability for apache agent to perform simple monitoring
    of server request/response without requiring server-status
    to be enabled.
  - Fixes invalid return statement in LVM agent.
  - Oracle TNS_ADMIN option 

    Resolves: rhbz#917806
    Resolves: rhbz#917681
    Resolves: rhbz#799065


author: David Vossel <dvossel@redhat.com> - 3.9.5-15
changelog:
  - Update VirtualDomain heartbeat agent for heartbeat merger.
  - Includes upstream fixes for pacemaker_remote lxc test case.

    Resolves: rhbz#917681


author: David Vossel <dvossel@redhat.com> - 3.9.5-16
changelog:
  - Fixes issue with mysql agent not being able to set transient
    attributes on local node correctly.
  - Fixes bash syntax error in VirtualDomain during 'stop'
  - Fixes VirtualDomain default hypervisor usage.
  - Fixes VirtualDomain 'start' of pre-defined domain

    Resolves: rhbz#917681
    Resolves: rhbz#1014641
    Resolves: rhbz#1016140


author: David Vossel <dvossel@redhat.com> - 3.9.5-17
changelog:
  - Split send_ua utility out of IPv6addr.c source so it can be
    re-used in IPaddr2 without requiring cluster-glue.
  - Fixes issue with pgsql and SAPInstance not setting transient
    attributes correctly when local corosync node name is not
    equal to 'uname -n'
  - High: ocft: Fedora supported test cases

    Resolves: rhbz#917681


author: David Vossel <dvossel@redhat.com> - 3.9.5-18
changelog:
  - Remove support for (nginx, mysql-proxy, rsyslog). nginx and
    mysql-proxy are not a supported projects. Rsyslog is not an
    agent we will be supporting in an HA environment.

    Resolves: rhbz#917681


author: David Vossel <dvossel@redhat.com> - 3.9.5-20
changelog:
  - tomcat agent updates for pacemaker support
  - slapd agent updates for pacemaker support
  - Fixes missing etab file required for nfsserver

    Resolves: rhbz#1033016
    Resolves: rhbz#917681


author: David Vossel <dvossel@redhat.com> - 3.9.5-24
changelog:
  - Addition of the clvmd resource-agent
  - Support monitoring qemu based VirtualDomain resources without
    requiring libvirtd to be running.

    Resolves: rhbz#1064512
    Resolves: rhbz#1060367


author: David Vossel <dvossel@redhat.com> - 3.9.5-25
changelog:
  - Rename clvmd agent to clvm to avoid problems associated
    with having a resource-agent named the same exact name
    as the binary the agent manages.

    Resolves: rhbz#1064512


author: David Vossel <dvossel@redhat.com> - 3.9.5-26
changelog:
  - Handle monitor qemu based VirtualDomain resources without
    requiring libvirtd even if configuration file does not
    contain an 'emulator' value pointing to the emulator binary.

    Resolves: rhbz#1060367


author: David Vossel <dvossel@redhat.com> - 3.9.5-28
changelog:
  - Updates to nfs server related agent.
  - Introduces nfsnotify for sending NFSv3 NSM state change
    notifications allowing NFSv3 clients to reclaim locks.

    Resolves: rhbz#1091101


author: David Vossel <dvossel@redhat.com> - 3.9.5-29
changelog:
  - Support the check_user and check_passwd galera resource-agent
    options.
  - Minor NFS agent updates.

    Resolves: rhbz#1116166
    Resolves: rhbz#1091101


author: David Vossel <dvossel@redhat.com> - 3.9.5-30
changelog:
  - Support monitor of lxc without requiring libvirt.
  - Wait for filesystem modules to load during start.
  - Warn users managing clustered LVM when lvmetad is in use.
  - Restore VirtualDomain default start stop timeout values.
  - Support exit reason string
  - Auto set lvm locking type to clustered when clvmd is in use.

  Resolves: rhbz# 1083041
  Resolves: rhbz# 1083231
  Resolves: rhbz# 1097593
  Resolves: rhbz# 1105655
  Resolves: rhbz# 1128933
  Resolves: rhbz# 773395


author: David Vossel <dvossel@redhat.com> - 3.9.5-31
changelog:
  - Man page updates give pcs config examples
  - add iscsi agent support
  - add infiniband support to ethmonitor
  - add resource-agent support of exit reason string
  - add safe umount option to Filesystem resource agent

    Resolves: rhbz#1058102
    Resolves: rhbz#1118029
    Resolves: rhbz#1122285
    Resolves: rhbz#1128933
    Resolves: rhbz#1095944


author: David Vossel <dvossel@redhat.com> - 3.9.5-32
changelog:
  - Fixes iSCSILogicalUnit syntax error
  - Fixes mysql stop operation when db storage is unavailable

    Resolves: rhbz#1118029
    Resolves: rhbz#1138871


author: David Vossel <dvossel@redhat.com> - 3.9.5-33
changelog:
  - Merges latest upstream patches for galera agent
  - Merges latest upstream patchs for exit reason string

    Resolves: rhbz#1116166
    Resolves: rhbz#1128933


author: David Vossel <dvossel@redhat.com> - 3.9.5-34
changelog:
  - Fixes mysql agents behavior when monitoring resource instance
    when environment validation fails.

    Resolves: rhbz#1138871


author: David Vossel <dvossel@redhat.com> - 3.9.5-35
changelog:
  - Introduces docker resource-agent for managing docker containers.
    The docker agent is being released as tech preview.

    Resolves: rhbz#1135026


author: David Vossel <dvossel@redhat.com> - 3.9.5-36
changelog:
  - Fixes cleaning up stale docker containers during stop if
    container instance failed.

    Resolves: rhbz#1135026


author: David Vossel <dvossel@redhat.com> - 3.9.5-37
changelog:
  - Rename docker agent's 'container' arg to 'name' to avoid confusion
    with pacemaker's metadata 'container' argument.
  - Introduce monitor_cmd into docker agent.

    Resolves: rhbz#1135026


author: David Vossel <dvossel@redhat.com> - 3.9.5-42
changelog:
  - Improve galera resource-agent to not require use of read-only
    mode to retrieve last known write sequence number.

    Resolves: rhbz#1170376


author: David Vossel <dvossel@redhat.com> - 3.9.5-44
changelog:
  - For IPsrcaddr, properly handle misconfiguration in a way that
    doesn't result in fencing.
  - Return exit reason for invalid netmask in IPaddr2

    Resolves: rhbz#1200756
    Resolves: rhbz#773399


author: David Vossel <dvossel@redhat.com> - 3.9.5-45
changelog:
  - Fix clvmd usage of daemon_options
  - Use better default nfsserver start timeouts
  - Make nfsserver preserve options in /etc/sysconfig/nfs
  - Add link_status_only option to ethmonitor agent
  - Add support for nginx agent
  - Add support for db2 agent
  - CTDB agent updates

    Resolves: rhbz#1171162
    Resolves: rhbz#1173193
    Resolves: rhbz#1182787
    Resolves: rhbz#1213971
    Resolves: rhbz#1183136
    Resolves: rhbz#1059988
    Resolves: rhbz#1077888


author: David Vossel <dvossel@redhat.com> - 3.9.5-46
changelog:
  - iface-vlan agent
  - Allow partial activation when physical volumes are missing.
  - Properly handle 'includes' during apache config parsing
  - Support for NovaCompute resource-agent

    Resolves: rhbz#1160365
    Resolves: rhbz#1214781
    Resolves: rhbz#1223615
    Resolves: rhbz#1214360


author: David Vossel <dvossel@redhat.com> - 3.9.5-47
changelog:
  - NovaCompute and NovaEvacuate updates
  - dhcpd chroot fix
  - redis 0byte error fix

    Resolves: rhbz#1214360
    Resolves: rhbz#1227293
    Resolves: rhbz#1231032


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 3.9.5-55
changelog:
  - NovaCompute/NovaEvacuate: Fix 'evacute' typo
  - NovaEvacuate invoke off action

    Resolves: rhbz#1282723
    Resolves: rhbz#1287303


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 3.9.5-57
changelog:
  - Replace NovaCompute with nova-compute-wait which lets systemd
    manage the nova-compute process

    Resolves: rhbz#1304011


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 3.9.5-60
changelog:
  - rabbitmq-cluster: fix to forget stopped cluster nodes
  - nfsserver: fix systemd status detection

    Resolves: rhbz#1247303
    Resolves: rhbz#1126073


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 3.9.5-62
changelog:
  - tomcat: fix for SELinux enforced mode
  - send_arp: fix buffer overflow on infiniband devices
  - mysql: fix tmpfile leak
  - VirtualDomain: add migrate_options parameter
  - VirtualDomain: fix issue where config file might get removed
  - VirtualDomain: fix locale in stop and status functions()

    Resolves: rhbz#1249430
    Resolves: rhbz#1250728
    Resolves: rhbz#1263348
    Resolves: rhbz#1242181
    Resolves: rhbz#1242558
    Resolves: rhbz#1301189


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 3.9.5-63
changelog:
  - IPaddr2: use IPv6 DAD for collision detection
  - nagios: new resource agent

    Resolves: rhbz#1276699
    Resolves: rhbz#1212632


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 3.9.5-67
changelog:
  - sap_redhat_cluster_connector: add support for hostnames with "-"
  - NovaEvacuate: simplify nova check
  - portblock: new resource agent

    Resolves: rhbz#1265527
    Resolves: rhbz#1287314
    Resolves: rhbz#1303037


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 3.9.5-69
changelog:
  - SAP HANA: add Multiple Components One System (MCOS) support
  - VirtualDomain: add migration_speed and migration_downtime options
  - VirtualDomain: fix unnecessary error when probing nonexistent domain
  - oralsnr: fix status check fail when username is more than 8 characters long
  - oracle: fix unable to start because of ORA-01081

    Resolves: rhbz#1289107
    Resolves: rhbz#1296406
    Resolves: rhbz#1307160
    Resolves: rhbz#1317578
    Resolves: rhbz#1318985


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 3.9.5-70
changelog:
  - nfsserver: fix nfs-idmapd fails to start due to
    var-lib-nfs-rpc_pipefs.mount being active

    Resolves: rhbz#1325453


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 3.9.5-73
changelog:
  - portblock: fix tickle_tcp bug
  - nfsserver: use rpcpipefs_dir variable
  - mysql: use replication_port variable
  - oracle: inform user that monprofile must start with C## for
    container databases

    Resolves: rhbz#1337109
    Resolves: rhbz#1337615
    Resolves: rhbz#1337124
    Resolves: rhbz#1328386


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 3.9.5-78
changelog:
  - nfsserver: fix monitor issues causing NFS to start on
    "debug-monitor" and "resource cleanup"
  - nfsserver: remove "up to 10 tries" on start to avoid issues with
    some services taking longer to start
  - nfsserver: stop rpc-gssd to allow unmounting of "rpcpipefs_dir"

    Resolves: rhbz#1356866
    Resolves: rhbz#1126073
    Resolves: rhbz#1346733


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 3.9.5-81
changelog:
  - oracle: fix issue with C## in monprofile and inform user that
    monuser must start with C## as well for container databases

    Resolves: rhbz#1328386


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 3.9.5-82
changelog:
  - portblock: create tickle_dir if it doesn't exist
  - tomcat: use systemd if available

    Resolves: rhbz#1303037
    Resolves: rhbz#1249430


author: Justin M. Forbes <jforbes@redhat.com> 0.5.1-2
changelog:
  - Ugly hacks to make package noarch and available for arch that cannot build it.
  - Disable useless debuginfo


author: Cole Robinson <crobinso@redhat.com> - 1.7.0-1
changelog:
  - Rebased to version 1.7.0
  - Support for virtio-scsi
  - Improved USB drive support
  - Several USB controller bug fixes and improvements


author: Cole Robinson <crobinso@redhat.com> - 1.7.1-1
changelog:
  - Rebased to version 1.7.1
  - Initial support for booting from USB attached scsi (USB UAS) drives
  - USB EHCI 64bit controller support
  - USB MSC multi-LUN device support
  - Support for booting from LSI SCSI controllers on emulators
  - Support for booting from AMD PCscsi controllers on emulators


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-2
changelog:
  - Disable options not used / not supported by RHEL-7 (rhbz 927582)
  - Add pvpanic device driver (rhbz 967777)
  - Obsolete vgabios (rhbz 976340)


author: Miroslav Rezanina <mrezanin@redhat.com> - seabios-1.7.2.2-3.el7
changelog:
  - seabios-floppy-Introduce-struct-floppy_pio_s-for-floppy-PIO-.patch [bz#920140]
  - seabios-floppy-Cleanup-floppy-irq-wait-handling.patch [bz#920140]
  - seabios-floppy-Implement-media-format-sensing.patch [bz#920140]
  - seabios-Place-rpm-version-info-into-version-banner.patch [bz#894979]
  - seabios-ahci-add-missing-check-for-allocation-failure.patch [bz#1005747]
  - Resolves: bz#1005747
    (fail to boot rhel7 guest with >126(21 ahci controller) ahci disks)
  - Resolves: bz#894979
    (place rpm version info into version banner)
  - Resolves: bz#920140
    (qemu-kvm emulation of 2.88M floppy fails)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-4.el7
changelog:
  - seabios-Introduce-and-convert-pmm-code-to-use-standard-list-.patch [bz#947051]
  - seabios-Fix-error-in-hlist_for_each_entry_safe-macro.patch [bz#947051]
  - seabios-Another-fix-for-hlist_for_each_entry_safe.patch [bz#947051]
  - seabios-uas-add-temporary-superspeed-stopgap.patch [bz#947051]
  - seabios-usb-add-usb_update_pipe.patch [bz#947051]
  - seabios-usb-add-xhci-support.patch [bz#947051]
  - seabios-xhci-adaptions-for-old-rhel7-seabios-codebase.patch [bz#947051]
  - seabios-allow-1TB-of-RAM.patch [bz#1016974]
  - Resolves: bz#1016974
    ([HP 7.0 FEAT]: Increase KVM guest supported memory to 4TiB)
  - Resolves: bz#947051
    ([RFE] implement xhci support in seabios)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-5.el7
changelog:
  - seabios-build-explicitly-set-ROM-size.patch [bz#1038604]
  - Resolves: bz#1038604
    (make seabios 256k for rhel7 machine types)


author: Michal Novotny <minovotn@redhat.com> - seabios-1.7.2.2-6.el7
changelog:
  - seabios-biostables-support-looking-up-RSDP.patch [bz#1034877]
  - seabios-romfile_loader-utility-to-patch-in-memory-ROM-files.patch [bz#1034877]
  - seabios-acpi-load-and-link-tables-through-romfile-loader.patch [bz#1034877]
  - Resolves: bz#1034877
    (export acpi tables to guests (seabios))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-8.el7
changelog:
  - seabios-vgabios-Fix-cirrus-memory-clear-on-mode-switch.patch [bz#979898]
  - Resolves: bz#979898
    ([qemu-kvm]The win2k3-32 guest display is abnormal when using -vga cirrus)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-10.el7
changelog:
  - Fixed seavgabios-bin obsoletes/provides [bz#1035452]
  - Resolves: bz#1035452
    ( seavgabios-bin has bad obsoletes/provides for "vgabios")


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-11.el7
changelog:
  - seabios-init_virtio_scsi-reset-the-HBA-before-freeing-its-vi.patch [bz#1013418]
  - seabios-smbios-catch-zero-length-strings.patch [bz#1052837]
  - seabios-resume-restore-piix-pm-config-registers-after-resume.patch [bz#1049860]
  - seabios-pci-align-64bit-pci-regions-to-1G.patch [bz#1055832]
  - seabios-pci-log-pci-windows.patch [bz#1055832]
  - seabios-pci-improve-io-address-space-allocation.patch [bz#1055832]
  - Resolves: bz#1013418
    (qemu-kvm with a virtio-scsi controler without devices attached quits after stop/cont in HMP/QMP)
  - Resolves: bz#1049860
    (Guest agent command hang there after restore the guest from the save file)
  - Resolves: bz#1052837
    (The wrong DMI structures could not be decoded while booting vm with -smbios params)
  - Resolves: bz#1055832
    (can not see seabios GUI when boot with 155 virtio-blk-pci disks via pci-bridge)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.5-2.el7
changelog:
  - seabios-Build-seabios-as-noarch.patch [bz#1118380]
  - Resolves: bz#1118380
    (Seabios build required for ppc64)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.5-4.el7
changelog:
  - seabios-smbios-set-bios-vendor-version-fields-to-Seabios-0.5.patch [bz#1123299]
  - Resolves: bz#1123299
    (smbios table 0 vendor string should be Seabios (for rhel6 compatibility) [7.1+7.0.z])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.5-5.el7
changelog:
  - seabios-Workaround-for-a-win8.1-32-S4-resume-bug.patch [bz#1050775]
  - seabios-boot-Fix-boot-order-for-SCSI-target-lun-9.patch [bz#1096560]
  - Resolves: bz#1096560
    (fail to assign correct order for the boot device in seabios as we specified the bootindex in qemu-kvm cli(under the same virtio-scsi-pci))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.5-6.el7
changelog:
  - seabios-Extend-ExclusiveArch-to-power64-architectures.patch [bz#1163924]
  - Resolves: bz#1163924
    (seabios is needed for ppc64 and ppc64le but marked ExclusiveArch aarch64)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.5-8.el7
changelog:
  - seabios-turn-off-stack-switching-for-vgabios.patch [bz#1182634]
  - Resolves: bz#1182634
    (Remove CONFIG_VGA_ALLOCATE_EXTRA_STACK)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.5-9.el7_1
changelog:
  - seabios-boot.c-delay-exiting-boot-if-menu-key-is-ESC.patch [bz#841638]
  - seabios-boot-switch-default-menu-key-to-ESC.patch [bz#841638]
  - Resolves: bz#841638
    (Provide a platform agnostic approach to invoking the BIOS, boot menu, or other BIOS functions)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.5-10.el7
changelog:
  - seabios-fw-pci-scan-all-buses-if-extraroots-romfile-is-prese.patch [bz#1235381]
  - seabios-fw-pci-map-memory-and-IO-regions-for-multiple-pci-ro.patch [bz#1235381]
  - Resolves: bz#1235381
    (RFE: configure guest NUMA node locality for guest PCI devices)


author: Yash Mankad <ymankad@redhat.com> - 1.7.5-11.el7
changelog:
  - seabios-bootorder-Update-extra-pci-root-buses-bootorder-form.patch [bz#1242968]
  - Resolves: bz#1242968
    (pci: support booting of devices behind PXB)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.9.1-2.el7
changelog:
  - seabios-fw-pci-add-Q35-S3-support.patch [bz#1185721]
  - Resolves: bz#1185721
    (win7 guest (boot with q35) show dark screen after do S3)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.9.1-3.el7
changelog:
  - seabios-redhat-reserve-more-memory-on-fseg.patch [bz#1327060]
  - seabios-redhat-turn-off-some-config-options.patch [bz#1327060]
  - Resolves: bz#1327060
    ([Seabios]Limited boot number supported for SCSI/SATA)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.9.1-4.el7
changelog:
  - seabios-Build-vgabios-virtio.bin.patch [bz#1327001]
  - Resolves: bz#1327001
    (vgabios-virtio.bin should be included  in seavgabios-bin package)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.9.1-5.el7
changelog:
  - seabios-pci-don-t-map-virtio-1.0-storage-devices-above-4G.patch [bz#1373154]
  - Resolves: bz#1373154
    (Guest fails boot up with ivshmem-plain and virtio-pci device)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.9.1-5.el7_3.1
changelog:
  - seabios-vgabios-Reorder-video-modes-to-work-around-a-Windows.patch [bz#1392028]
  - Resolves: bz#1392028
    ([virtio-win][svvp][ws2016] cannot generate dump file when using nmi on ws2016 and win10-32/64)


author: Dan Walsh <dwalsh@redhat.com> 2.1.1-3
changelog:
  - Add two new httpd booleans, turned off by default
       * httpd_can_network_relay
       * httpd_can_network_connect_db


author: Dan Walsh <dwalsh@redhat.com> 2.1.2-1
changelog:
  - Update to upstream 
  - Turn off allow_execmem and allow_execmod booleans
  - Add tcpd and automount policies


author: Jeremy Katz <katzj@redhat.com> - 2.1.2-3
changelog:
  - fix requirements to be on the actual packages so that policy can get
    created properly at install time


author: Dan Walsh <dwalsh@redhat.com> 2.1.3-1
changelog:
  - Turn back on execmem since we need it for java, firefox, ooffice
  - Allow gpm to stream socket to itself


author: Dan Walsh <dwalsh@redhat.com> 2.1.6-13
changelog:
  - Add dri libs to textrel_shlib_t
  - Add system_r role for java
  - Add unconfined_exec_t for vncserver
  - Allow slapd to use kerberos


author: Dan Walsh <dwalsh@redhat.com> 2.1.12-3
changelog:
  - Fix for procmail/spamassasin
  - Update to upstream
  - Add rules to allow rpcd to work with unlabeled_networks.


author: Dan Walsh <dwalsh@redhat.com> 2.2.2-1
changelog:
  - Update to upstream
  - Turn off execheap execstack for unconfined users
  - Add mono/wine policy to allow execheap and execstack for them
  - Add execheap for Xdm policy


author: Dan Walsh <dwalsh@redhat.com> 2.2.19-2
changelog:
  - Fix swapon
  - allow httpd_sys_script_t to be entered via a shell
  - Allow httpd_sys_script_t to read eventpolfs


author: Dan Walsh <dwalsh@redhat.com> 2.2.20-1
changelog:
  - Fix load_policy to work on MLS
  - Fix cron_rw_system_pipes for postfix_postdrop_t
  - Allow audotmount to run showmount


author: Dan Walsh <dwalsh@redhat.com> 2.2.23-8
changelog:
  - Blkid changes
  - Allow udev access to usb_device_t
  - Fix post script to create targeted policy config file


author: Dan Walsh <dwalsh@redhat.com> 2.2.23-17
changelog:
  - MLS Fixes
       dmidecode needs mls_file_read_up
  - add ypxfr_t
  - run init needs access to nscd
  - udev needs setuid
  - another xen log file
  - Dontaudit mount getattr proc_kcore_t


author: Dan Walsh <dwalsh@redhat.com> 2.2.29-2
changelog:
  - Add mono dbus support
  - Lots of file_context fixes for textrel_shlib_t in FC5
  - Turn off execmem auditallow since they are filling log files


author: Russell Coker <rcoker@redhat.com> 2.2.29-5
changelog:
  - Fixed mailman with Postfix #183928
  - Allowed semanage to create file_context files.
  - Allowed amanda_t to access inetd_t TCP sockets and allowed amanda_recover_t
    to bind to reserved ports.  #149030
  - Don't allow devpts_t to be associated with tmp_t.
  - Allow hald_t to stat all mountpoints.
  - Added boolean samba_share_nfs to allow smbd_t full access to NFS mounts.
    - Make mount run in mount_t domain from unconfined_t to prevent mislabeling of
    /etc/mtab.
  - Changed the file_contexts to not have a regex before the first ^/[a-z]/
    whenever possible, makes restorecon slightly faster.
  - Correct the label of /etc/named.caching-nameserver.conf
  - Now label /usr/src/kernels/.+/lib(/.*)? as usr_t instead of
    /usr/src(/.*)?/lib(/.*)? - I don't think we need anything else under /usr/src
    hit by this.
  - Granted xen access to /boot, allowed mounting on xend_var_lib_t, and allowed
    xenstored_t rw access to the xen device node.


author: Dan Walsh <dwalsh@redhat.com> 2.2.29-6
changelog:
  - Allow secadm_t ability to relabel all files
  - Allow ftp to search xferlog_t directories
  - Allow mysql to communicate with ldap
  - Allow rsync to bind to rsync_port_t


author: Dan Walsh <dwalsh@redhat.com> 2.2.32-2
changelog:
  - Add unconfined_mount_t
  - Allow privoxy to connect to httpd_cache
  - fix cups labeleing on /var/cache/cups


author: Dan Walsh <dwalsh@redhat.com> 2.3.3-3
changelog:
  - Allow prelink to read bin_t symlink
  - allow xfs to read random devices
  - Change gfs to support xattr


author: Dan Walsh <dwalsh@redhat.com> 2.3.3-11
changelog:
  - Added Paul Howarth patch to only load policy packages shipped 
    with this package
  - Allow pidof from initrc to ptrace higher level domains
  - Allow firstboot to communicate with hal via dbus


author: Dan Walsh <dwalsh@redhat.com> 2.3.6-4
changelog:
  - Change allow_execstack to default to on, for RHEL5 Beta.  
    This is required because of a Java compiler problem.
    Hope to turn off for next beta


author: Dan Walsh <dwalsh@redhat.com> 2.3.9-4
changelog:
  - Set /usr/lib/ia32el/ia32x_loader to unconfined_execmem_exec_t for ia32 platform
  - Fix spec for /dev/adsp


author: Dan Walsh <dwalsh@redhat.com> 2.3.16-9
changelog:
  - Remove bluetooth-helper transition
  - Add selinux_validate for semanage
  - Require new version of libsemanage


author: James Antill <james.antill@redhat.com> 2.4.2-6
changelog:
  - Fix policygentool specfile problem.
  - Allow apache to send signals to it's logging helpers.
  - Resolves: rhbz#212731


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-1
changelog:
  - Dontaudit appending hal_var_lib files 
  Resolves: #217452
  Resolves: #217571
  Resolves: #217611
  Resolves: #217640
  Resolves: #217725


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-3
changelog:
  - Allow login programs to polyinstatiate homedirs
  Resolves: #216184
  - Allow quotacheck to create database files
  Resolves: #212957


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-16
changelog:
  - Allow semanage to exec it self.  Label genhomedircon as semanage_exec_t
  Resolves: #219421
  - Allow sysadm_lpr_t to manage other print spool jobs
  Resolves: #220080


author: Dan Walsh <dwalsh@redhat.com> 2.5.1-1
changelog:
  - Allow prelink when run from rpm to create tmp files
  Resolves: #221865
  - Remove file_context for exportfs
  Resolves: #221181
  - Allow spamassassin to create ~/.spamassissin
  Resolves: #203290
  - Allow ssh access to the krb tickets
  - Allow sshd to change passwd
  - Stop newrole -l from working on non securetty
  Resolves: #200110
  - Fixes to run prelink in MLS machine
  Resolves: #221233
  - Allow spamassassin to read var_lib_t dir
  Resolves: #219234


author: Dan Walsh <dwalsh@redhat.com> 2.5.2-1
changelog:
  - Add ability to generate webadm_t policy
  - Lots of new interfaces for httpd
  - Allow sshd to login as unconfined_t


author: Dan Walsh <dwalsh@redhat.com> 2.5.2-4
changelog:
  - Fix spamassisin so crond can update spam files
  - Fixes to allow kpasswd to work
  - Fixes for bluetooth


author: Dan Walsh <dwalsh@redhat.com> 2.5.2-6
changelog:
  - Allow mozilla, evolution and thunderbird to read dev_random.
  Resolves: #227002
  - Allow spamd to connect to smtp port
  Resolves: #227184
  - Fixes to make ypxfr work
  Resolves: #227237


author: Dan Walsh <dwalsh@redhat.com> 2.5.4-2
changelog:
  - Revert Nemiver change
  - Set sudo as a corecmd so prelink will work,  remove sudoedit mapping, since this will not work, it does not transition.
  - Allow samba to execute useradd


author: Dan Walsh <dwalsh@redhat.com> 2.5.11-6
changelog:
  - Fix hald_acl_t to be able to getattr/setattr on usb devices
  - Dontaudit write to unconfined_pipes for load_policy


author: Dan Walsh <dwalsh@redhat.com> 2.6.4-5
changelog:
  - More fixes for alsactl
  - Transition from hal and modutils
  - Fixes for suspend resume.  
       - insmod domtrans to alsactl
       - insmod writes to hal log


author: Dan Walsh <dwalsh@redhat.com> 3.0.2-7
changelog:
  - Begin adding policy to separate setsebool from semanage
  - Fix xserver.if definition to not break sepolgen.if


author: Dan Walsh <dwalsh@redhat.com> 3.0.8-7
changelog:
  - Allow cupsd_config_t to read/write usb_device_t
  - Support for finger print reader,
  - Many fixes for clvmd
  - dbus starting networkmanager


author: Dan Walsh <dwalsh@redhat.com> 3.0.8-15
changelog:
  - Allow tmpreadper to read man_t
  - Allow racoon to bind to all nodes
  - Fixes for finger print reader


author: Dan Walsh <dwalsh@redhat.com> 3.0.8-28
changelog:
  - Fixes for hald_mac 
  - Treat unconfined_home_dir_t as a home dir
  - dontaudit rhgb writes to fonts and root


author: Dan Walsh <dwalsh@redhat.com> 3.0.8-30
changelog:
  - Allow XServer to read /proc/self/cmdline
  - Fix unconfined cron jobs
  - Allow fetchmail to transition to procmail
  - Fixes for hald_mac
  - Allow system_mail to transition to exim
  - Allow tftpd to upload files
  - Allow xdm to manage unconfined_tmp
  - Allow udef to read alsa config
  - Fix xguest to be able to connect to sound port


author: Dan Walsh <dwalsh@redhat.com> 3.2.5-6
changelog:
  - Fix role transition from unconfined_r to system_r when running rpm
  - Allow unconfined_domains to communicate with user dbus instances


author: Dan Walsh <dwalsh@redhat.com> 3.3.1-5
changelog:
  - Allow nsplugin_config execstack/execmem
  - Allow nsplugin_t to read alsa config
  - Change apache to use user content


author: Dan Walsh <dwalsh@redhat.com> 3.3.1-6
changelog:
  - Prepare policy for beta release
  - Change some of the system domains back to unconfined
  - Turn on some of the booleans


author: Dan Walsh <dwalsh@redhat.com> 3.3.1-15
changelog:
  - Allow init to transition to initrc_t on shell exec.
  - Fix init to be able to sendto init_t.
  - Allow syslog to connect to mysql
  - Allow lvm to manage its own fifo_files
  - Allow bugzilla to use ldap
  - More mls fixes


author: Dan Walsh <dwalsh@redhat.com> 3.3.1-20
changelog:
  - Fix bug in mozilla policy to allow xguest transition
  - This will fix the 

  libsemanage.dbase_llist_query: could not find record value
  libsemanage.dbase_llist_query: could not query record value (No such file or
  directory)
   bug in xguest


author: Dan Walsh <dwalsh@redhat.com> 3.3.1-22
changelog:
  - Allow stunnel to transition to inetd children domains
  - Make unconfined_dbusd_t an unconfined domain


author: Dan Walsh <dwalsh@redhat.com> 3.3.1-27
changelog:
  - Allow nsplugin to read /etc/mozpluggerrc, user_fonts
  - Allow syslog to manage innd logs.
  - Allow procmail to ioctl spamd_exec_t


author: Dan Walsh <dwalsh@redhat.com> 3.3.1-28
changelog:
  - Allow radvd to use fifo_file
  - dontaudit setfiles reading links
  - allow semanage sys_resource
  - add allow_httpd_mod_auth_ntlm_winbind boolean
  - Allow privhome apps including dovecot read on nfs and cifs home 
  dirs if the boolean is set


author: Dan Walsh <dwalsh@redhat.com> 3.3.1-44
changelog:
  - Change unconfined_t to transition to unconfined_mono_t when running mono
  - Change XXX_mono_t to transition to XXX_t when executing bin_t files, so gnome-do will work


author: Dan Walsh <dwalsh@redhat.com> 3.4.1-3
changelog:
  - Dontaudit search of admin_home for init_system_domain
  - Rewrite of xace interfaces
  - Lots of new fs_list_inotify
  - Allow livecd to transition to setfiles_mac


author: Dan Walsh <dwalsh@redhat.com> 3.4.2-7
changelog:
  - Allow confined users to use postgres
  - Allow system_mail_t to exec other mail clients
  - Label mogrel_rails as an apache server


author: Dan Walsh <dwalsh@redhat.com> 3.4.2-12
changelog:
  - Allow amanda to read tape
  - Allow prewikka cgi to use syslog, allow audisp_t to signal cgi
  - Add support for netware file systems


author: Dan Walsh <dwalsh@redhat.com> 3.5.1-1
changelog:
  - Fix xguest -> xguest_mozilla_t -> xguest_openiffice_t
  - Change dhclient to be able to red networkmanager_var_run


author: Dan Walsh <dwalsh@redhat.com> 3.5.1-4
changelog:
  - Consolodate pyzor,spamassassin, razor into one security domain
  - Fix xdm requiring additional perms.


author: Dan Walsh <dwalsh@redhat.com> 3.5.10-1
changelog:
  - Allow NetworkManager to transition to avahi and iptables
  - Allow domains to search other domains keys, coverup kernel bug


author: Dan Walsh <dwalsh@redhat.com> 3.5.13-14
changelog:
  - Additional fixes for cyphesis
  - Fix certmaster file context
  - Add policy for system-config-samba
  - Allow hal to read /var/run/video.rom


author: Dan Walsh <dwalsh@redhat.com> 3.6.12-6
changelog:
  - Allow cupsd_t to create link files in print_spool_t
  - Fix iscsi_stream_connect typo
  - Fix labeling on /etc/acpi/actions
  - Don't reinstall unconfine and unconfineuser on upgrade if they are not installed


author: Dan Walsh <dwalsh@redhat.com> 3.6.12-19
changelog:
  - Allow initrc_t to delete dev_null
  - Allow readahead to configure auditing
  - Fix milter policy
  - Add /var/lib/readahead


author: Dan Walsh <dwalsh@redhat.com> 3.6.12-20
changelog:
  - Fix labeling on /var/lib/misc/prelink*
  - Allow xserver to rw_shm_perms with all x_clients
  - Allow prelink to execute files in the users home directory


author: Dan Walsh <dwalsh@redhat.com> 3.6.12-21
changelog:
  - Allow confined users to manage virt_content_t, since this is home dir content
  - Allow all domains to read rpm_script_tmp_t which is what shell creates on redirection


author: Dan Walsh <dwalsh@redhat.com> 3.6.12-27
changelog:
  - Fix /sbin/ip6tables-save context
  - Allod udev to transition to mount
  - Fix loading of mls policy file


author: Dan Walsh <dwalsh@redhat.com> 3.6.13-3
changelog:
  - Add fish as a shell
  - Allow fprintd to list usbfs_t
  - Allow consolekit to search mountpoints
  - Add proper labeling for shorewall


author: Dan Walsh <dwalsh@redhat.com> 3.6.25-1
changelog:
  - Fix polkit label
  - Remove hidebrokensymptoms for nss_ldap fix
  - Add modemmanager policy
  - Lots of merges from upstream
  - Begin removing textrel_shlib_t labels, from fixed libraries


author: Dan Walsh <dwalsh@redhat.com> 3.6.31-4
changelog:
  - Fix devicekit_disk_t to getattr on all domains sockets and fifo_files
  - Conflicts seedit (You can not use selinux-policy-targeted and seedit at the same time.)


author: Dan Walsh <dwalsh@redhat.com> 3.6.31-5
changelog:
  - Fix label on /usr/bin/notepad, /usr/sbin/vboxadd-service
  - Remove policycoreutils-python requirement except for minimum


author: Dan Walsh <dwalsh@redhat.com> 3.6.32-13
changelog:
  - Allow cupsd_config to read user tmp
  - Allow snmpd_t to signal itself
  - Allow sysstat_t to makedir in sysstat_log_t


author: Dan Walsh <dwalsh@redhat.com> 3.7.7-1
changelog:
  - Move users file to selection by spec file.
  - Allow vncserver to run as unconfined_u:unconfined_r:unconfined_t


author: Dan Walsh <dwalsh@redhat.com> 3.7.8-3
changelog:
  - Allow abrt_helper to getattr on all filesystems
  - Add label for /opt/real/RealPlayer/plugins/oggfformat\.so


author: Dan Walsh <dwalsh@redhat.com> 3.7.10-4
changelog:
  - Change allow_execstack and allow_execmem booleans to on
  - dontaudit acct using console
  - Add label for fping
  - Allow tmpreaper to delete sandbox_file_t
  - Fix wine dontaudit mmap_zero
  - Allow abrt to read var_t symlinks


